• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.2079-2083
• /
• 2007

하구둑은 해수의 역류에 의한 염수침입을 방지하고 유역에 필요한 담수를 확보하기위하여 건설되며, 하구둑에 의하여 하천의 하구에 담수호가 생성된다. 하구담수호에 의해 기존에 염해로 취수할 수 없었던 하천구간에서의 취수가 가능하게 되며, 하구담수호를 일정한 수위로 관리함으로써 상당량의 농업용수를 확보할 수 있다. 이와 관련하여 하구담수호에 의하여 확보되는 수자원량에 대해 설계 당시의 분석 자료들이 있기는 하지만, 대부분 연 총량의 형태로 나타나 있으며, 수리권과 관련하여 하구둑에 의하여 추가적으로 확보되는 수리권 가용수량이 얼마인지에 대한 분석은 거의 없다. 그것은 하구둑의 방류량이 댐의 방류량과는 달라서 조석의 영향을 매우 크게 받기 때문에 단순한 물수지 분석으로 이를 모의하기 힘들기 때문이다. 게다가 1일 2회의 조석이 발생하므로 1일단위의 물수지 분석은 어려운 현실이다. 그럼에도 불구하고 하구둑에서 많은 양의 농업용수 취수가 이루어지고 있다. 과연 얼마정도의 양이 수리권으로서의 역할을 할 수 있는지 모르고 임의적인 허가가 계속 부여될 경우, 갈수 시 용수공급의 안정성을 확보할 수 없게 될 것이다. 따라서 안정적인 용수의 공급을 위한 적절한 수리권 가용수량에 대한 추정 필요하다. 이에 본 연구에서는 영산강하구둑의 실시간 운영을 위하여 고 등(2004)이 개발한 "영산강하구 둑 물관리 프로그램"의 기본적인 조위의 예측과 배수갑문의 방류량 산정기법 등과 수자원장기종 합계획(2006) 수립 시에 사용된 장기간의 일자연유량을 이용하여 하구둑의 수리권 가용수량 추정 모형을 개발하고, 이를 영산강 하구둑에 의해 생성된 영산호에 적용함으로써 영산호에 의해 증가되는 수리권 가용수량에 대해 고찰하여 보았다., 그리고 T-P $77.7{\sim}96.6%$(평균 94.3%)로 산정되었다. 이러한 결과는 대청호로 유입하는 유기물과 영양염류 연간 부하량의 80% 이상이 강우-유출과 함께 유입하는 것을 의미하며, 저수지 수질관리를 위해서는 유역차원의 비점오염원 관리가 시급함을 시사한다.하기 위해, 수렴흐름 추적자시험에 의한 종분산지수와 시험대수층의 평균선형유속을 이용하여 종분산계수를 구하였다. 현장에서 수행된 양수시험에 의한 평균선형유속 22.44 m/day와 평균 종분산지수 0.4155 m를 적용하여 산정된 종분산계수는 $9.32\;m^2/day$이었다. 따라서, 시험부지 내 충적층에서 일정한 양수율$(2,500\;m^3/day)$로 지하수를 개발할 시에 양수정 주변지역으로 유입되는 염소이온의 확산면적은 1일 $9.32\;m^2$ 정도일 것으로 나타났다.적인 $OH{\cdot}$ 의 생성은 ascorbate가 조직손상에 관여할 가능성을 시사하였다.었다. 정확한 예측치를 얻기 위하여 불균질 조직이 조사야에 포함되는 경우 보정이 요구되며, 골반의 경우 골 조직의 보정이 중요한 요인임을 알 수 있었다. 이를 위하여 불균질 조직에 대한 정확한 정보가 요구되며, 이는 CT 영상을 이용하는 것이 크게 도움이 되리라 생각된다.전시 슬러지층과 상등액의 온도차를 측정하여 대사열량의 발생량을 측정하고 슬러지의 활성을 측정할 수 있는 방법을 개발하였다.enin과 Rhaponticin의 작용(作用)에 의(依)한 것이며, 이는 한의학(韓醫學) 방제(方劑) 원리(原理)인 군신좌사(君臣佐使) 이론(理論)에서 군약(君藥)이 주증(主症)에 주(

• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.2
• /
• pp.199-204
• /
• 2004

Height has become one of the most important factors to determine the pulmonary function test index, and there is a high correlation between them, so that they have been utilized for evaluating pulmonary function test predictive value or nomogram. Therefore, we have tried to find out that difference and if there is any correlation and linear relationship between height and forced expiratory flow curve. There were a total of 163 subjects, male 93 and female 70. This study was done at the Department of Pulmonary Function Test of Jeon-Ju Presbyterian Hospital and we measured the index at the forced expiratory flow curve of FVC, $FEV_{1.0}$, $FEV_{1.0}$/FVC, $FEF_{25-75%}$, and $FEF_{200-1200m{\ell}}$. When we subjected the group of height more than 160cm, there were gradual increments at FVC(p<0.001), $FEV_{1.0}$(p<0.001), $FEF_{25-75%}$(p<0.05) and $FEF_{200-1200m{\ell}}$(p<0.001), but no changes at $FEV_{1.0}$/FVC in terms of forced expiratory flow curve index. We have analyzed the relationship between height and forced expiratory flow curve, there was a close relationship at FVC(r=0.670, p<0.01), $FEV_{1.0}$(r=0.491, p<0.01), $FEF_{25-75%}$ (r=0.175, p<0.05) and $FEF_{200-1200m{\ell}}$(r=0.370, p<0.01) but there was reciprocal relationship at $FEV_{1.0}$/FVC(r=-0.215, p<0.01). We have tried simple regression analysis to see if height affects forced expiratory flow curve index as a sector, and the result was $FVC(\ell)=0.0642{\times}height(cm)-7.2978$(p<0.01, $R^2=0.449$), $FEV_{1.0}(\ell)=0.0407{\times}height(cm)-4.2774$ (p<0.01, $R^2=0.2411$), $FEV_{1.0}/FVC(%)=-0.2892{\times}height(cm)+121.44$(p<0.01, $R^2=0.0464$), $FEF_{25-75%}(\ell/sec)=0.0176{\times}height(cm)-0.7876$(p<0.05, $R^2=0.0237$), $FEF_{200-1200m{\ell}}(\ell/sec)=0.0967{\times}height(cm)-11.037$(p<0.01, $R^2=0.1214$) this was approved statistically. According to this study, if height is taller than average, forced expiratory flow curve index were increased, there was a close relationship between height and forced expiratory flow curve, and there was a linear relationship as sector between height and forced expiratory flow curve index. Therefore, researches that study other factors such as sex, age, weight, body surface area, and obesity indexes other than height should be done to see if there are any further relationships.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.5
• /
• pp.548-555
• /
• 1995

This study was aimed to provide understanding on the eco-physiological response of barley tillers as affected by sowing method. Yield and yield contribution rates of tillers were investigated with the data of field experiments in the Honam Crops Experiment Station of Iri, Korea from October 1986 to July 1987. Narrow-seeding (each row placement 40cm$\times$seeding width of each row 18cm), drill-seeding (20cm$\times$5cm) and broadcasting on wide ridge (each ridge placement 120cm$\times$ridge width 90cm) were applied to examine the effects of various sowing methods. Primary tillers such as mainstem, 1 and 2 produced ears in all treatments, but the ear from a secondary tiller of 11 was observed only in broadcasting on wide ridge. Drill-seeding was the highest in number of spikelet, grain and plump grain per ear, while narrow-seeding being the lowest. The plump grain yield per square meter was 679.8g in narrow-seeding, while drill-seeding and broadcasting produced more than narrow seeding by 28.7% and 16.8% respectively. The actual yields per l0a for sowing methods showed a similar pattern to plump grain yield per square meter in which the yield was 567.6kg by narrow-seeding and the increments of drill-seeding and broadcasting were 30.6% and 15.4%, respectively.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.21 no.4
• /
• pp.191-202
• /
• 2001

Experiments were conducted on established grassland sward at Gongiam, Kwangju, and Kyung-gi in Korea from 1995 to 1997. The influence of mineral-N fertilizer or animal manure(AW) on herbage dry matter(DM) yield, N yield, the recovery of AM-N, and soil N and organic matter(0M) content in the mixed sward('potomac' orchardgrass, 'fawn' tall fescue, and 'kenblue' Kentuky bluegrass) was investigated. The treatments were replicated three times in a split plot block design. AM(the main plots) was applied at 200kg N ha ' year ' on each plot. The types of AM were cattle feedlot manure(CFM), pig manure fermented with sawdust(PMFS) and Korea native cattle slurry(KNCS). Three levels of mineral-N fertilizer, as urea, ranging from 0 to 200kg N $ha^{-1}\;year^{-1}$ in 100kg increments, were superimposed on each plot. The fertilizers and AM were applied in two equal dressings(the end of March and middle of November). AM and mineral fertilizer had significant effects(p<0.05) on herbage DM and N yields. Herbage yields in KNCS were higher than those in CFM and PMFS(p

• Journal of Digital Convergence
• /
• v.14 no.4
• /
• pp.363-370
• /
• 2016

Noise is unwanted sound that is the reason of the stress and hearing loss. The current study attempted to estimate whether the noise of dental laboratory affected stress and pure tone audiometry (PTA) of dental laboratory technicians (DLTs) using heart rate variability, air and bone conduction audiometry. The age, heights, and weights of DLTs were resembled control. Standard deviation of normal to normal interval such as stress resistance and normalized HF of DLTs were significantly decreased, but heart rates, normalized LF, and LF/HF ratio of DLTs were significantly increased compared with control. In air conduction audiometry of DLTs, significant increments of thresholds encountered in 125, 250, 500, 1000, 2000, 3000, 4000, and 6000 Hz in the right ears and 125, 250, 500, 1000, and 2000 Hz in the left ears. Thresholds of bone conduction audiometry in both ears were significantly increased in 250, 500, 1000, 2000, and 4000 Hz. The findings in this study provide that stress and hearing loss observed in noise-exposed DLTs at dental laboratory. Therefore, proper safety precautions should be carried out at dental laboratory.

• Fisheries and Aquatic Sciences
• /
• v.9 no.4
• /
• pp.160-166
• /
• 2006

We explored the possibilities of using the freshwater rotifer Brachionus angularis as a live food for small fishes cultured in fresh- or brackish waters. Brachionus angularis were collected from a reservoir for isolation and laboratory culture. Length and width of the lorica were $102.3{\mu}m$ and $76.6{\mu}m$, respectively, and those of amictic eggs were $64.4{\mu}m\;and\;47.9{\mu}m$, respectively. When their growth rates were examined at six different temperatures, i.e., 15, 20, 25, 30, 35, and $40^{\circ}C$, the highest daily growth rate of 0.801 was observed at $35^{\circ}C$, and growth was lower with decreasing temperature. Adaptation to salinity change was evaluated with two different modes of salinity increase: step-wise elevation lasting for short durations of 5 to 30 min or a long duration of 24 h. With the short duration modes, no individuals survived salinity higher than 10 psu, and the number of live individuals did not increase throughout the experiment. However, in the 24-h elevation, the number of individuals increased when salinity was elevated by 1 to 2 psu per day for the first 2 or 3 days, while no increase in number occurred at salinity increments higher than 3 psu per day. In addition, to assess the effect of different diets, four single-component diets (Chlorella vulgaris, Nannochloris sp., baker's yeast, or dry yeast) and three combination diets (C. vulgaris + Nannochloris sp. + baker's yeast + dry yeast; C. vulgaris 70% + baker's yeast 30%; C. vulgaris 30% + baker's yeast 70%) were used. The specific growth rates of B. angularis fed combination diets were higher than those of rotifers fed any single-component diet, with the highest rate of 0.648 in B. angularis fed a mixture of C. vulgaris, Nannochloris sp., baker's yeast, and dry yeast, and the lowest rate of 0.200 in those fed dry yeast only. Our results indicate that the freshwater rotifer B. angularis can be used for seedling production of both freshwater and brackish-water fishes that require small (less than about $120{\mu}m$) live food during their early stages.

• The Korean Journal of Malacology
• /
• v.29 no.1
• /
• pp.77-82
• /
• 2013

In this study, growth-line analysis was carried out on the hard clam (Meretrix petechialis) recovered from the Neolithic Age Daejuk-ri Shell Middens, Seosan, Korea, with aim to determine the seasonality of shellfish collection and site occupation. Growth increments of 206 specimens of the clam were examined. The marginal index (MI) of the archaeological specimens was calculated and was compared to the monthly marginal index of modern specimens under the assumption that the growth pattern was the same as it is today. MI of the archaeological specimens ranged from 0.13 to 1.29 and was divided into four categories: < 0.63, spring; 0.63-0.76, summer; 0.76-0.89, fall; $$\geq_-$$ 0.89, winter collection. As a result, of 206 specimens, 170 specimens (82.5%) represented spring, 18 (8.7%) summer, 10 (4.9%) fall and 8 (3.9%) winter collection. The results suggest year-round shellfish collection at the sites, with an emphasis on spring. Considering these results it can be inferred that the sites were occupied throughout the year.

• Geophysics and Geophysical Exploration
• /
• v.15 no.4
• /
• pp.155-162
• /
• 2012

The Thomsen-Haskell method was used to determine sensitivities of the Rayleigh-wave phase velocities and spectral amplitude of vertical ground motion to insertion of a single velocity-anomaly layer into overburden underlain by a basement. The reference model comprised a 9-m thick overburden with shear-wave velocity (${\nu}_s$ of 300 m/s above a half-space with ${\nu}_s$ = 1000 m/s. The inserted layer, with a velocity of 150, 225, 375, or 450 m/s and a thickness of 1, 2, or 3 m, was placed at depths increasing from the surface in increments of 1 m. Phase velocities were computed for frequencies of 4 to 30 Hz. For inserted layer models, we placed an anomalous layer with thickness of 1 ~ 3 m, shear-wave velocity of 150 ~ 450 m/s, and at depths of 0 ~ 8 m in the overburden. The frequency range of 8 ~ 20 Hz were the most sensitive to the difference of $C_R$ between the inserted and reference models (${\Delta}C_R$) for h = 1 m and the frequency range got wide as h increased. For all of the models, the spectral amplitudes of the fundamental mode exceeded those of the $1^{st}$-higher mode except at frequencies just above the low-frequency cutoff of the $1^{st}$-higher mode.

• Restorative Dentistry and Endodontics
• /
• v.28 no.4
• /
• pp.334-340
• /
• 2003

This study was performed to evaluate the actual temperature rise on the surface of Buchanan plugger using thermocouple. The heat carrier system 'System B Heatsource'(Model 1005, Analytic Technologies, Redmond, WA, USA) and the Buchanan pluggers of F, FM, M and ML sizes are used for this study. The temperature was set to 200^{\circ}C on digital display and the power level on it was set to 10. Five thermocouples were placed in direct contact with the surface of each size of Buchanan's pluggers at 1 mm increments from the tip to the 4 mm length of shank. The heat control spring was touched for 5 seconds. and the temperature rise on the surface of the pluggers were measured at 1 sec intervals for more than 5 seconds with an accuracy of 0.01 using Data Logger. The data were statistically analyzed by one-way ANOVA. The results were as follows. 1. The position at which the temperature peaked was approximately at 1~2 mm far from the tip of Buchanan plugger (p<0.01). 2. The peak temperature was $215.25{\pm}2.28^{\circ}C$ in F plugger. $185.94{\pm}2.19^{\circ}C$ in FM plugger, $169.51{\pm}9.12^{\circ}C$ in M plugger, and 160.79{\pm}1.27^{\circ}C in ML plugger and the peak temperature was highest in F plugger and followed by. in descending order. FM plugger. M plugger. ML plugger showed the lowest peak temperature (p<0.01). 3. The temperature on the plugger was decreased with the increase of touching time. This results suggest that the actual temperature on the surface of the pluggers does not correlate well with the temperature set on digital display. Heat concentrates around the tip. The larger plugger reveals lower temperature rise relatively.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.3
• /
• pp.371-381
• /
• 2016

The present study investigated the effects of processing parameters such as time (10, 20, 30, 40 min), pressure (25, 50, 75, 100 MPa), and the salinity of brine (0~10%(w/v)) on jacopever (Sebastes schlegeli Hilgendorf) in order to establish optimization of the three factors using a high hydrostatic pressure (HHP) machine. To do so, it analyzed the quality characteristics of volatile basic nitrogen (VBN), trimethylamine (TMA), total bacterial counts, dynamic viscoelasticities, and differential scanning calorimetry (DSC) properties. First, when the time increased to 40 mins, by 10 min intervals, the total bacterial counts in HHP groups under $25^{\circ}C$, 100 MPa, and 4%(w/v) brine were significantly decreased except for the first 10 min in comparison to the control group. In regards to DSC properties, the onset temperature ($T_O$) of the first endothermal curve was significantly reduced. Second, when the pressure level increased up to 100 MPa by 25 MPa increments, the total bacterial counts in the HHP samples significantly decreased for 20 min at 50 MPa or higher. As the pressure increased, G', G" and the slope of tan ${\delta}$ decreased (except for 50 MPa). Third, in regards to the salinities of brine, when the HHP processing was treated at 100 MPa, $25^{\circ}C$ for 20 min, the total bacterial counts of all the HHP groups significantly decreased in comparison to those of the control group. A significant difference was found in the enthalpy of the second endothermic curve in the 6~10%(w/v) (except 7%(w/v)) HHP groups. Therefore, the salinity of the immersion water under the HHP condition was appropriate when it was lower than 6%(w/v). The present study demonstrated that the optimum parameter condition according to/under the condition of the microbial inhibition and economic effects using an HHP would be the reaction time for 20 min, reaction pressure at 100 MPa, and the salinity of 4%(w/v) brine.