• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.958-959
• /
• 2015

This paper proposes adaptive incremental conductance(A-IC) algorithm for maximum power point tracking(MPPT) control of photovoltaic. Conventional Perturbation & Observation(PO) and IC MPPT control algorithm generally uses fixed step size. A small fixed step size will cause the tracking speed to decrease and tracking accuracy of the MPP will decrease due to large fixed step size. Therefore, this paper proposes N-IC MPPT algorithm that adjust automatically step size according to operating conditions. To improve tracking speed and accuracy, when operating point is far from maximum power point(MPP), step size uses maximum value and when operating point is near from MPP, step size uses variable step size that adjust according to slope of P-V curve. The validity of MPPT algorithm proposed in this paper prove through compare with conventional IC MPPT algorithm.

• 대한토목학회논문집
• /
• 제8권3호
• /
• pp.11-20
• /
• 1988

사하중과 단조 활하중을 받고 있는 철근콘크리트판에 대한 일반적인 유한요소 해석방법을 개발하였다. 이 방법을 통하여 탄성, 비탄성 및 극한범위에서 하중-변형 응답과 균열전파를 추적할 수 있었고 또한 응답 경로를 통하여 콘크리트와 철근의 내부응력을 결정할 수 있었다. 면내응력과 휨응력간의 상호작용을 고려하는 층분할된 8 절점 등매개변수 요소를 개발하였다. 수치해를 구하는 방법은 접선증분 강성도법을 이용하였다. 본 해법에 대한 유효성을 검토하기 위하여 다른 해석결과들과 비교하였다.

• 복합신소재구조학회 논문집
• /
• 제5권4호
• /
• pp.1-10
• /
• 2014

A progressive failure analysis procedure for composite laminates is developed in here and in the companion paper. An anisotropic plastic constitutive model for fiber-reinforced composite material, is developed, which is simple and efficient to be implemented into computer program for a predictive analysis procedure of composites. In current development of the constitutive model, an incremental elastic-plastic constitutive model is adopted to represent progressively the nonlinear material behavior of composite materials until a material failure is predicted. An anisotropic initial yield criterion is established that includes the effects of different yield strengths in each material direction, and between tension and compression. Anisotropic work-hardening model and subsequent yield surface are developed to describe material behavior beyond the initial yield under the general loading condition. The current model is implemented into a computer code, which is Predictive Analysis for Composite Structures (PACS), and is presented in the companion paper. The accuracy and efficiency of the anisotropic plastic constitutive model are verified by solving a number of various fiber-reinforced composite laminates with and without geometric discontinuity. The comparisons of the numerical results to the experimental and other numerical results available in the literature indicate the validity and efficiency of the developed model.

• 한국콘텐츠학회논문지
• /
• 제15권12호
• /
• pp.604-611
• /
• 2015

고온으로 인하여 콘크리트 내부의 수분이 증발할 경우 주변의 온도를 흡수하는 기화열이 발생하게 된다. 이에 따라 콘크리트의 내부온도는 외부의 온도가 지속적으로 증가함에도 불구하고 증가율이 둔화되는 현상이 나타나게 된다. 본 논문은 고강도 콘크리트 부재의 고온 하에서의 기화열을 고려한 내부의 온도변화를 예측하고자 하는 것으로 부재 내부의 임의의 위치에서의 온도를 산정하기 위하여 유한요소방식을 적용하였다. 이러한 해석기법의 정확성을 검증하기 위하여 여러 다른 연구자들에 의한 실험 데이터와 비교하였으며, 그 결과 기화열로 인하여 온도가 소실되는 현상을 포함한 전반적인 부재 내부의 온도분포 거동이 실제 실험 데이터와 거의 유사하게 나타나는 것으로 확인되었다.

• 조명전기설비학회논문지
• /
• 제28권11호
• /
• pp.17-25
• /
• 2014

This paper proposes a novel maximum power point tracking (MPPT) system using a fuzzy logic control (FLC) algorithm for robust in-environment changing. The power available at the output of a photovoltaic (PV) cell continues to change with radiation and temperature because a solar cell exhibits nonlinear current-voltage characteristics. Therefore, the maximum power point (MPP) of PV cells varies with radiation and temperature. The MPPT methods are used in PV systems to make full utilization of the PV array output power, which depends on radiation and temperature. The conventional MPPT control methods such as constant voltage (CV), perturbation and observation (PO) and incremental conductance (IC) have been studied but these methods are problematic in that they fail to take into account the changing environment. The proposed FLC controller is based on the fuzzy control algorithm and facilitates robust control with the environmental changes. Also, the PV systems applied FLC controller is modeled by PSIM and the response characteristics of the FLC method according to environmental variations are analyzed through comparison with the performance of conventional methods. The validity of this controller is shown through response results.

• 전기학회논문지
• /
• 제61권12호
• /
• pp.1864-1871
• /
• 2012

This paper proposes the hybrid proportional integral(HBPI) controller for maximum power point tracking(MPPT) control of photovoltaic system. The output characteristics of the solar cell are a nonlinear and affected by a temperature, the solar radiation and influence of a shadow. The MPPT control is a very important technique in order to increase an output and efficiency of the photovoltaic system. The conventional constant voltage(CV), perturbation and observation(PO) and incremental conductance(IC) are the method which finding maximum power point(MPP) by the continued self-excitation vibration, and uses the fixed step size. If the fixed step size is a large, the tracking speed of maximum power point is faster, but the tracking accuracy in the steady state is decreased. On the contrary, when the fixed step size is a small, the tracking accuracy is increased and the tracking speed is slower. Therefore, in order to solve these problems, this paper proposes HBPI controller that is adjusted gain of conventional PI control using fuzzy control, and the maximum power point tracks using this controller. The validity of the controller proposed in this paper proves through the results of the comparisons.

• 전기학회논문지
• /
• 제60권11호
• /
• pp.2064-2075
• /
• 2011

In this paper, robust multi-level perturbation and observation (MLPO) maximum power point tracking (MPPT) control are presented of the environmental change including the solar radiation and temperature. Because the maximum power point of the Photovoltaic (PV) is changing according to the solar radiation and temperature, the technology which traces the maximum power point in order to increase the power efficiency is recognized as the very important part. The general requirement for the MPPT is that system is simple, the cost is inexpensive, the PV tracking function and output change are small. Conventional perturbation and observation (PO) method is a simple system but there is the disadvantage that an efficiency of system becomes low. In addation, the incremental conductance (IC) control is required expensive CPU because of a large of calculations. In order to solve this problem, in this paper, the MLPO MPPT control using the method diversifying the step size according to the environment condition is presented. The validity of the MLPO method presenting from this paper is proved through analyzing the solar power generation output error at the steady state.

• 한국안전학회지
• /
• 제17권4호
• /
• pp.87-93
• /
• 2002

This paper is presented new fuzzy controller for high performance of induction motor drive. New fuzzy controller took out appropriate amounts of accumulated control input according to fuzzy described situations in addition to the incremental control input calculated by conventional direct fuzzy controller. The structures of the proposed controller was motivated by the problems of direct fuzzy controller. The direct controller was given generally inevitable overshoot when one tries to reduce rise time of response. The undesirable characteristics of the direct fuzzy controller are caused by integrating operation of the controller, even though the integrator itself is introduced to overcome steady state error in provide a thorough comparative insight into the behavior of induction motor drive with direct and new fuzzy speed controller. The validity of the comparative results is confirmed by the simulation results for induction motor drive system.

• 조명전기설비학회논문지
• /
• 제26권5호
• /
• pp.21-33
• /
• 2012

This paper presents the new maximum power point tracking(MPPT) control of the photovoltaic(PV) module integrated converter(MIC) system considering the shadow influence. The output characteristics of the solar cell is a nonlinear and affected by a temperature, the solar radiation and influence of a shadow. Particularly, MIC system is very sensitive to the shadow influence because the capacity is very small. In order to increase an output and efficiency of the solar power generation, the maximum power point(MPP) obeying control are necessary. Conventional perturbation and observation(PO) and Incremental conductance(IC) are the method finding MPP by the continued self-excitation vibration. The MPPT control is unable to be performed by rapid output change affected by the shadow. To solve this problem, the new control algorithm of the multi-level in which the step value changes by output change is presented. In case there are the solar radiation, a temperature and shadow influence, the presented algorithm treats and compares the conventional control algorithm and output error. In addition, the validity of the algorithm is proved. through the output error response characteristics.

• 전력전자학회논문지
• /
• 제10권2호
• /
• pp.124-129
• /
• 2005

본 논문에서는 서보분야에 적용되는 고분해능 엔코더를 장착하고 자극위치 센서인 홀센서를 부착하지 않은 선형영구자석 동기전동기의 개선된 초기 자극위치 추정방법을 제안하였다. 제안한 방법은 수치해석법인 할선법을 적용하여 추력이 영인 두 곳 중에서 한 곳을 추정하고, 추정 q축에 시험전류를 인가하여 실제 전동기의 d축을 추정한다. 그리고 전류제어기와 위치정보만을 사용하는 제안한 추정방법은 적용이 용이한 장점을 가지며, 회전형 동기전 동기에도 쉽게 적용할 수 있다. PMLSM에 대한 실험을 통하여 매우 짧은 이동거리(약 평균 85㎛)내에서 빠른 시간 안에 높은 초기각 추정 정밀도를 보이는 우수한 실험결과를 제시하여 제안한 방법의 타당성을 검증하였다.