• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.1
• /
• pp.35-40
• /
• 1999

Recently, sagittal split ramus oseotomy and intraoral vertical ramus osteotomy have been commonly performed for the correction of mandibular prognathism, occurred to abundant oriental people. Many authors have studied the soft tissue change after orthognathic surgery, especially between mandibular hard tissues and soft tissue of lower lip, but the study of upper lip change is comparatively little. Therefore, we studied the 12 patients, operated only sagittal split ramus osteotomy without genioplasty or maxillary osteotomy in department of oral and maxillofacial surgery, Hanyang university hospital from 1996. 1. 1. to 1998. 7. 20. Preoperative and postoperative cephalometric view was measured to know the change of upper lip position and shape after mandibular setback. The result were obtained as follows. 1. The ratio of upper lip change amount to lower incisor horizontal movement was 15.1%. 2. The ratio of lower facial profile between Sn-Stm and Stm-Mes was changed from 1 : 2.352 to 1 : 2.069 after operation. 3. Post-operative upper lip was flattened 72.4% compared with pre-operative one. 4. The vermilion zone of the upper lip increased 56 % horizontally, 5.8% vertically after operation. 5. The vermilion zone ratio of the lower lip to the upper lip was changed from 1 : 1.253 to 1 : 1.348. 6. The distance between esthetic line and Ls was changed from -3.958mm to -1.15mm.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.4
• /
• pp.521-527
• /
• 2018

In dental trauma, reattachment of the original tooth fragment improves the reproduction of original tooth shape, texture, color, and radiolucency; thus, it provides good aesthetics. A 9-year-old boy was referred due to complicated crown-root fracture of the maxillary right central incisor. Although it had poor prognosis due to severe coronal damage and subcrestal fracture, reattachment of the tooth fragment was chosen due to the patient's age. One-visit apexification with mineral trioxide aggregate (MTA) was performed, followed by osteotomy and reattachment of the tooth fragment with post placement. Regular observation revealed no clinical signs or symptoms and no radiologic complications.

• The korean journal of orthodontics
• /
• v.31 no.1 s.84
• /
• pp.51-61
• /
• 2001

Cleft lip and/or palate (CLP) is one of the most common congenital craniofacial anomalies and occurs more frequently in Asian people. Dental abnormalities in number, size, shape, and eruption of teeth are frequently associated with CLP. The purposes of this study were to investigate the effects of CLP on number, size, shape and eruption of teeth and to provide basic clinical data for diagnosis and treatment of the CLP patients. With the orthodontic and cleft charts, diagnostic models, orthopantomograms and intraoral x-ray films from 241 CLP patients who visited Dept. of Orthodontics, Seoul National University Dental Hospital, we evaluated the frequency of congenital missing teeth, supernumerary teeth, Impacted teeth, and microdontia. The results were as fellows ; 1. Frequency of congenital missing was relatively high up to $56.8\%$. Congenital missing occurred frequently in the maxillary lateral incisor and the maxillary second premolar. Among the CLP types, frequencies of congenital missing in cleft lip and Palate group and cleft lip and alveolus group were higher than those of cleft lip group and cleft palate group. And bilateral cleft showed higher frequencies than unilateral ones. 2. Supernumerary tooth was shown in $11.2\%$ of CLP patients. It occurred frequently in the area between the maxillary lateral Incisors and the maxillary canine. Among the CLP types, cleft lip group showed relatively most highest frequency. 3. Impaction was shown in $18.3\%$ of CLP patients. It occurred most frequently In the maxillary lateral incisor and the maxillary canine than other teeth. Among the CLP types, cleft lip group and cleft lip and palate group showed most highest frequencies. 4. Microdontia was shown in $15.8\%$ of CLP patients. It occurred the most frequently In the maxillary lateral incisors and maxillary canines. Among the CLP types, cleft lip and alveolus group and cleft lip and palate group showed relatively higher frequencies. There was no microdontia in cleft palate group.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.4
• /
• pp.427-435
• /
• 2017

The most important factor in the treatment of fully edentulous patients using implants is the shape of the definitive prosthesis. After the shape of the definitive prosthesis is determined, residual bone analysis and selection of the implant type, number and position should be followed. In this case, for restoration of an edentulous patient fully implanted (except the maxillary right lateral incisor) without considering definitive prosthesis, facial esthetics and possibility of fixed type prosthesis were evaluated using complete denture. It was determined that the fixed type prosthesis was possible. Implants that could not be used for the definitive prosthesis were excluded from the treatment plan and fixed type provisional restorations were fabricated. After four months of provisional restorations, the patient showed stable occlusion and esthetic satisfaction. Definitive prosthesis was made of zirconia using CAD/CAM (computer aided design and computer aided manufacturing). The results were satisfactory during the 3 months of follow-up period after termination of treatment.

• The korean journal of orthodontics
• /
• v.27 no.3 s.62
• /
• pp.445-456
• /
• 1997

This study was designed to examine the dental asymmetry in person with facial asymmetry and to examine the relationship between the degree of mandibular deviation and asymmetry of maxillary dental arch. The sample!, were divided to asymmetry group and normal group. The asymmetry group consisted of 21 subjects(6 males and 15 females) and their mean age was 23.5 years. The normal group consisted of 20 subjects(10 males and 10 females) and their mean age was 18.6 years. Anteroposterior, transverse position of all maxillary teeth except 3rd molars, vortical position of maxillary 1st molars, and angulation of central incisors were measured. The anterioposterior and transverse positions of teeth were measured on the maxillary dental casts, the vertical position of maxillary 1st molars and angulation of maxillary incisors were measured on posteroanterior cephalometric radiographs. The data were analyzed to examine whether significant asymmetries existed in each of the asymmetry and normal groups. The results of this study were as follows : 1. In the asymmetry group, the correlation between the degree of mandibular deviation and that of 3-dimensional dental asymmetry was not so high. 2. In the asymmetry group, the teeth in deviated side were more laterally positioned than that of undeviated side. There were differences in the anteroposterior position of maxillary 1st and 2nd molars and the angulation of maxillary central incisors. 3. In the asymmetry group, the transverse asymmetry was larger in the posterior teeth rather than in the anterior teeth and larger than the anteroposterior asymmetry.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.3
• /
• pp.263-269
• /
• 2011

The digital impression technique has been developed for more precise restorations and convenient procedures in prosthodontic treatment compared to the conventional impression technique. Along with the utilization of CAD/CAM, the introduction of digital impression technique actualizes the digitalization of dental treatments. This case is to compare two different prostheses introducing each procedure in detail; one from CAD/CAM after taking digital impression and the other from the conventional technique. A 22-year-old female visited the clinic with the chief complaint of correction of discoloration and shape on maxillary right central incisor. Due to the trauma 8 years ago, the tooth was endodontically treated with post and resin core. The treatment was planned and the procedures were conducted under the patient's consent to treat the tooth with all ceramic crowns in two different ways for comparison. In conclusion, both prostheses presented clinically acceptable results with comparing the internal fitness of two all ceramic crowns. The prosthesis from digital impression, however, showed more errors in respect of internal fitness.

• The korean journal of orthodontics
• /
• v.34 no.2 s.103
• /
• pp.109-119
• /
• 2004

This study aimed at investigating the skeletal, dentoalveolar, and soft tissue changes of Class III malocclusion cases treated by second molar extraction. The lateral cephalograms of 15 subjects with moderate Class III malocclusion by average ANB $-1.4^{\circ}\;and\;IMPA\;85^{\circ}$ were traced and the computerized superimposition of average craniofacial change was made. The data was gathered and statistically analyzed. The results were as follows: 1 Lower anterior facial height/anterior facial height increased by 0.6%(P<0.01), mandibular plane increased by $1.5^{\circ}$(P<0.05). 2. There was a slightly downward & backward rotation of the mandible. 3. Lower first molar tipped distally by 4.nm(P<0.001), lower anterior teeth lingually tipped by $3.2^{\circ}$(P<0.05). 4. Retracted lower lip improved facial profile. This study may suggest that second molar extraction could be effective for a moderate Class III malocclusion to make distalization of the lower first molar easier and avoid severe lingual tipping of the lower incisor, if the lower third molar has a normal shape, good direction of eruption and adequate time for lower second molar extraction

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.119-124
• /
• 2009

Statement of problem: The increasing demand for esthetic restorations has been required developing new materials for tooth colored restoration. Ceromer(Ceramic Optimized Polymer) has some advantages over porcelain, and has gained increasing popularity in restorative dentistry. However, there is little information on the dimensional changes in a clinical restoration in moist conditions. Purpose: This study examined the dimensional changes in Ceromer restorations with a clinical crown shape that were fabricated in a clinical manner. Material and methods: The crowns for the maxillary central incisor were fabricated with two Ceromers($BelleGlass^{(R)}$ and $Targis^{(R)}$) using a similar clinical restoration manufacturing technique. A total of twenty specimens were prepared and immersed in distilled water at room temperature to allow for water absorption. The weight, height and width were measured at 24, 72 and 168 hours. The accumulated ratios of the changes were calculated and evaluated using a paired t-test and an independent independent t-test. Results: The dimensions and weight increased with increasing soaking time. $Targis^{(R)}$ showed significant differences in height and weight between 24 hours and the other times(P<.05). $BelleGlass^{(R)}$ showed significant differences in width and weight between 24 hours and the other times. The two materials showed different changing patterns of the dimensions but there were no statistically significant differences between them. Conclusion: The dimensions and weight of the Ceromer restorations were changed by water absorption. The clinical crown shaped specimen showed more complicated dimensional changes than the simplified specimens.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.4
• /
• pp.267-275
• /
• 2023

To obtain better esthetic results when immediately placing a dental implant, the soft tissue surrounding the implant must be conditioned during healing of the extraction socket. To this end, the emergence profile can be customized through immediate restoration of the provisional prosthesis, and good clinical results can be obtained at the time of definitive restoration in the future, resulting in high patient satisfaction. In this case, horizontal root fracture occurred after trauma to both maxillary central incisors. Immediate implant placement and loading was planned considering aesthetics and alveolar bone condition. By taking an impression using a digital intraoral scanner, a digital diagnostic wax-up was performed to make a more aesthetic prosthesis without applying external force to the traumatized teeth. Based on this, the ideal placement location was determined and immediate implant placement was performed using a 3D printed surgical guide. The provisional prosthesis was restored 5 days after placement, and the definitive zirconia crown was restored through soft tissue conditioning and customization using the shape of the provisional prosthesis for 3 months.