• Journal of Ship and Ocean Technology
• /
• 제8권4호
• /
• pp.17-25
• /
• 2004

Hull girder stress monitoring system for container ship uses four long-base-strain-gages at mid-ship to monitor the resultant stresses and the applied moment components of horizontal, vertical and torsional moments. The bending moments are estimated by using the conventional strain-moment relations, however, the torsional moment related to the warping strain requires the assumption of the shape of torsional moments over the hull girder. Though this shape could be a sine function with an adequate period, it largely depends upon certain empirical formulas. This paper introduces additional four long-base-strain-gages at mid-ship to derive the longitudinal slope of the warping strain because this slope is directly related to the torsional moment by Bi-moment concept. An open-channel-type cantilever beam has been selected as a simplified model for container ship and the result has proved that the suggested concepts can estimate the torsional component accurately. Finally this method can become reliable technique to derive all external moments in hull girder stress monitoring system for container ships.

• 한국강구조학회 논문집
• /
• 제21권3호
• /
• pp.211-219
• /
• 2009

비렌딜 트러스가 면내 휨모멘트 하중을 받는 지관 정방형의 각형강관 T형 접합부의 거동을 실험적으로 조사하기 위한 것이 본 논문의 목적이다. T형 접합부에서 각형강관 주관 플랜지면의 위에 각형강관 지관이 용접으로 접합되어 있다. 주요 변수로는 주관 두께에 대한 폭의 비($2{\gamma}$)로 ${16.7{\leq}2{\gamma}{\leq}33.3}$의 범위이고, 주관 폭에 대한 지관 폭의 비인 폭비($\beta$)로 ${0.40{\leq}{\beta}{\leq}0.71}$이다. 접합부에 면내 휨모멘트 하중이 작용하도록 총 9개의 실험체를 제작하여 실험하였다. 실험결과, 각형강관 지관 정방형의 T형 접합부에 대한 면내 휨강도는 주관 폭두께비와 폭비에 관계없이 주관 플랜지 휨변형에 의해 결정됨을 알 수 있다. 또한, 지관 정방형의 각형강관 T형 접합부의 면내 휨강도는 사용성에 의해 지배되는 것으로 나타나 면내 최대 휨강도는 1%B 변형시의 휨강도($M_{1%B}$)에 1.5배로 평가할 수 있는 것을 알 수 있다. 최종적으로 지관 정방형의 각형강관 T형 접합부에 대한 면내 휨강도는 주관의 폭두께비가 작을수록, 주관 폭에 대한 지관 폭의 비인 폭비가 클수록 접합부의 휨강도는 선형으로 증가하는 것으로 나타났다.

• 대한조선학회논문집
• /
• 제47권4호
• /
• pp.580-588
• /
• 2010

OPB(out-of-plane bending)-induced failure of mooring chain was firstly addressed by CALM (catenary anchor leg mooring)-type offloading buoy, located approximately one mile away from the bow of the Girassol FPSO which was installed offshore area of Angola in September 2001. This study deals with verifying the load transfer mechanism between the first free chain link and connected two chain links inside the chain hawse. OPB moment to angle variation relationships are proposed by extensive parametric study where the used design variables are static friction coefficients, proof test loads, nominal tension forces, chain link diameters, chain link grades and chain link types. The stress ranges due to OPB moments are obtained using nonlinear FEAs (finite element analyses). Final stress ranges are derived considering ones from IPT (in-plane tension) forces. Also a formula for OPB fatigue assessment is briefly introduced.

• 한국강구조학회 논문집
• /
• 제21권5호
• /
• pp.451-459
• /
• 2009

본 논문은 냉간성형 각형강관 T형 접합부의 면내 휨모멘트를 평가하는데 목적이 있다. 이전 연구로부터, 주관 폭에 대한 지관 폭의 비가 0.71이하인 T형 접합부는 뚜렷한 최대 휨강도를 나타내지 못하는 접합부의 파괴모드는 주관 플랜지의 휨파괴이다. Zhao에 의해 수행된 실험을 포함한 결과로부터 주관 폭두께비는 ${16.7{\leq}2{\gamma}(=B/T){\leq}33}$이고, 주관 폭에 대한 지관 폭의 비인 폭비는 ${0.34{\leq}{\beta}(=b_{1}/B){\leq}0.71}$의 범위인 냉간성형 각형강관 T형 접합부에 대한 최대 휨강도 정의를 위한 변형제한치는 주관폭(B)의 1% 변형이며, 최대 휨강도는 1.5M1%B로 정의할 수 있다. 기본형에 대한 항복선 모델과 기존 연구자들에 의해 수정 제안된 항복선 모델식을 검토하여 실험결과와 비교한 결과, Zhao의 제안식이 가장 좋은 대응도와 분포도를 보였다. 따라서, 각형강관 T형 접합부에 대한 면내 설계 휨강도식으로 Zhao가 수정 제안한 항복선 모델식을 적용하는 것이 가장 합리적인 것으로 생각된다.

• 한국소음진동공학회논문집
• /
• 제15권2호
• /
• pp.123-128
• /
• 2005

Forced vibration of a thin circular ring with a concentrated harmonic force is analyzed when the ring is free and has only the in-plane motion. Using the unit doublet function for external force, the governing equation is obtained and is solved by the use of Laplace transform. The exact solutions of displacement components and bending moment are obtained. In order to verify the solutions of analysis, finite element analysis is performed and the results shows good agreement. Then, frequency response curves for displacement and bending moment are obtained. In deriving the governing equations and the solutions, nondimensional parameter of the exciting frequency and the magnitude of exciting force are extracted. As the displacement components are obtained, the remaining bending strain, slope, curvature, shear force, etc. can also be derived. With the results of this work, the responses of a free ring excited on multiple points with different frequencies can also be obtained easily by superposition.

• Journal of Welding and Joining
• /
• 제19권6호
• /
• pp.652-657
• /
• 2001

To analyze and predict crack initiation position and propagation directions on the spot welded area are very important for strength design of the automobile body structure. It is necessary to test by method considering random loads with variable amplitude for strength design of vehicle body structure, because driving cars are actually subjected to random loads with variable amplitude in the road. Although this condition, nearly all tests haute been performed under constant load conditions in the laboratory because it is impossible to replay like an actual conditions. In this study, using in-plane bending type specimens, the overload factor affecting on the fatigue strength, crack initiation and propagation directions of spot-welded specimens have been studied.

• International Journal of Safety
• /
• 제2권1호
• /
• pp.39-44
• /
• 2003

The present study deals with an approximate integral equation approach to finite deflection of elastic plates with arbitrary plane form. An integral formulation leads to a system of boundary integral equations involving values of deflection, slope, bending moment and transverse shear force along the edge. The basic principles of the development of boundary element technique are reviewed. A computer program for solving for stresses and deflections in a isotropic, homogeneous, linear and elastic bending plate is developed. The fundamental solution of deflection and moment is employed in this program. The deflections and moments are assumed constant within the quadrilateral element. Numerical solutions for sample problems, obtained by the direct boundary element method, are presented and results are compared with known solutions.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.433-436
• /
• 2004

The safety of buildings is generally estimated by analyzing a plane frame ignoring a minor bending moment. In this paper, uncertainties of reinforced concrete shear wall subjected to a biaxial bending are considered. First, major parameters are selected from all parameters of general shear wall design to perform a reliability analysis in their practical ranges, means and standard derivations of selected design parameters for the reliability analysis are calculated by a data mining as a simulation method. The bi-section method is used to find inclined neutral axis and its limit state using MATLAB subjected to the concept on strength design method. The reliability index $\beta$ as a safety index is calculated based on AFOSM(Advanced First-Order Second Moment) method. Also, if target reliability index $\beta_T$ is decided by an engineer an amount of reinforcement can be calculated by subtracting the reliability index $\beta$ from the target reliability index $\beta_T$.

• Steel and Composite Structures
• /
• 제24권5호
• /
• pp.523-536
• /
• 2017

A layerwise (LW) formulation based on the Galerkin method is presented to investigate the three-dimensional stress state in long sandwich plate which is subjected to tension force and pure bending moment. Based on the Galerkin method and the LW discretization approach, the equilibrium equations of elasticity for the long plate are written in the weak form and discretized through the thickness of the plate. The discretized equations are written in terms of displacement components of the numerical layers. The governing equations of the plate are solved analytically for the free edge boundary conditions. The distribution of stress state especially the 3D stress state in the vicinity of the edges of the sandwich plate which is subjected to tension and pure bending is studied. In order to increase the accuracy, the out of plane stresses are obtained by integrating the equilibrium equations of elasticity. The convergence and accuracy of the predictions are studied and various numerical results are presented for distribution of the in-plane and out of plane stresses in symmetric and un-symmetric sandwich plates.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.3-10
• /
• 2002

Recently, arches are used structurally because of their high in-plane stiffness and strength, which result from their ability to transmit most of the applied loading by axial forces actions, so that the bending actions are reduced. On the other hand, the resistances of arches to (out-of-plane,) flexural-torsional behavior depend on the rigidities EI/sub y/, for lateral bending, GJ for Uniform torsion, and EI/sub w/ for warping torsion which are related to axial stress for flexural-torsional behavior. The resistance of an arch to out-of-plane behavior may be reduced by its in-plane curvature, and so it may require significant lateral bracing. Thus. it is supposed that In-plane preloading which cause an axial stress, have an effect on out-of-plane free vibration behavior of arches. Because axial stresses caused increase or decrease out-of-plane stiffness. But study about this substance is insufficient. In this thesis, We will study an effect of preloading on lateral free vibration of arches, using finite element method based on Kang and Yoo's curved beam theory (about curved beam element have 7 degree of freedom including warping) with FORTRAN programming.