• Journal of Animal Science and Technology
• /
• v.54 no.6
• /
• pp.449-454
• /
• 2012

The present study was performed to investigate the effects of the plane of nutrition on growth performance and meat quality traits, especially marbling and PSE (pale, soft, and exudative), in finishing pigs. One hundred and four barrows and 102 gilts born to Yorkshire ${\times}$ Landrace dams and Duroc sires were randomly allocated to 16 pens at approximately 80-kg body weight, with 13 animals housed per pen except for two pens. Each eight pens received a diet containing either 3.4 Mcal ME/kg and 0.98% total lysine (high plane) or 3.1 Mcal ME/kg and 0.81% total lysine (medium plane). All animals were slaughtered at approximately 112 kg BW on an average, after which the Longissimus muscle (LM) was analyzed physicochemically. The ADG, ADFI, gain:feed as well as marbling score did not differ between the two dietary groups, whereas backfat thickness was greater in the high-plane group than in the medium-plane group (24.1 vs. 22.5 mm P<0.05). No LM exhibited PSE, i.e. $L^*$ (lightness) > 50, pH < 6.0 and drip loss > 5.0%, nor were these PSE-related variables influenced by the dietary treatment. Contents of crude protein and fat in LM did not differ between the two dietary groups. In conclusion, the present results suggest that growth performance and the occurrence of the PSE or 'watery' carcass are not influenced significantly by increasing the plane of nutrition in finishing pigs when the finisher is adequate nutritionally for supporting maximal lean growth. However, increasing the plane of nutrition is likely to result in an increase in fat deposition.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.3
• /
• pp.519-526
• /
• 1996

To investigate the relationship between plane and side drape coefficient, the drape tester designed in which coordinate of projected outline of draped specimen could be recorded. By using this drape tester, the three dimensional shape, plane and side drape coefficient were obtained from coordinate of plane projected shape, and furthermore examined the tendency in changes of drape coefficient in terms of diameter of specimen, deflection angle, and bending rigidity. The side drape coefficients were constant regardless of changes in diameter of specimen. The plane drape coefficients, however, made a little difference according to changes in diameter of specimen. The experimental drape coefficient agreed well with the theoretical drape coefficient according to deflection angle. In the meanwhile, when the plane drape coefficients were regressed with the side drape coefficents, regression equation was $y=0.375x-0.002x^2+6.9\times10^{-5}x^3$. When the $\overline{\theta_s}$ is mean of deflection angle of selected points which have the longest and shortest distance from center point in the node, the theoretical drape coefficient calculated from $\overline{\theta_s}$ has high correlation with experimental drape coefficient. The plane and side drape coefficient changed linearly with increasing the bending length, $\sqrt[3]{EI/w}$.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.14 no.2
• /
• pp.1-15
• /
• 2008

Purpose : This survey was to investigate on the effect of each region changed in trunk through sagittal plane after Trunk Flexion-Extension Exercise. Methods : 18 students of Gimcheon College participated in this study for the period of July 9-30, 2007. Analyzed factor were 1) degree of pain 2) presence of Gillet test and 3) difference of right-left for 7 landmark region in trunk applying I.B.S.-2000 after Trunk Flexion - Extension Exercise. We used the SPSS $PC^+$ program for classifying into analysis of frequency, $x^2$-test, t-test and Simple Linear Regression analysis test. Results: Followings are concluded For degree of pain, 13(72.2%) of students answered "No pain" after Trunk Flexion-Extension Exercise and in the result 4 more students decreased the pain. In the Gillet test, 14(77.8%) of students answered "positive" after Trunk Flexion-Extension Exercise and in the result 4 more students increased mobility of Sacroiliac joint. In the differences of right-left for 7 landmark region in trunk by B.M.I. scale, Slim type was decreased both Acromion(0.45mm), both Iliac crest(0.44mm), and both ASIS(0.31mm) to anterior plane, Normal type was decreased both inferior angle of Scapular(0.02mm), both L4-5(0.07mm), and both PSIS(0.09mm) to posterior plane Fatness type was decrease both Acromion(0.05mm), both ASIS(0.05mm) to anterior plane. In the differences of right-left for 7 landmark region in trunk for degree of pain No pain group was decreased both Acromion(0.17mm), both Nipple(0.25mm) to anterior plane and both PSIS(0.13mm) to posterior plane Pain group was decreased both Acromion(0.04mm), both Iliac creast(0.03mm) to anterior plane and both inferior angle of Scapular(0.18mm) both PSIS(0.13mm) to posterior plane. In the difference of right-left for 7 landmark region in trunk for each of the exercises, Both iliac crest(0.1mm), both ASIS(0.12mm) to anterior plane were decreased after Flexion Trunk Exercise. Both acromion(0.27mm) to anterior plane, both inferior angle of scapular(0.14mm) and both PSIS(0.12mm) to posterior plane were decreased after Extension Trunk Exercise. Each of the exercises, The both inferior angle of Scapular showed high scores($0.65{\pm}0.23$) at Trunk Extension Exercise group and there was statistical significance between Trunk Flexion Exercise group and Extension exercise group(t :-2.502, p < 0.05). 7. At Pre-exercise group, Both inferior angle of Scapular showed low scores($0.23{\pm}8.27$) at Trunk Extension Exercise group and there was statistical significance between Pre- Exercise group and Trunk Extension Exercise group(t :-2.5430, p<0.05). Conclusion : The simple linear regression analysis was presented at Acromion(-0.243), L4-5(-0.753), PSIS(0.576) and there was statistical significance in BMI scale(p<0.01).

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.252-256
• /
• 1990

In this paper, we proposed E-plane structures to obtain the high insertion loss at stopband and show that T-equivalent and K-inverter of Triple E-plane structures are better than those of All-Metal Insert E-plane structures. To show the characteristics first order bandpass filter are designed and tested at X band.

• Tunnel and Underground Space
• /
• v.18 no.3
• /
• pp.194-201
• /
• 2008

In order to investigate the characteristics in tensile strength of transversely isotropic rock, a new anisotropic tensile failure function was suggested. According to the function, the tensile strength is minimum in the normal direction to a weakness plane and rises exponentially to its maximum on a plane perpendicular to the weakness plane. The anisotropic function is defined in terms of three strength parameters which can be identified trom direct tensile tests of transversely isotropic rocks. By incorporating the suggested function into the critical plane approach, a numerical procedure which enables to search the tensile strength and the direction of critical plane at failure was presented. The validity of the suggested numerical procedure was checked through the simulation of direct tensile tests reported in a literature. The numerical results from the simulation were in good agreements with those from the laboratory tests.

• Archives of Plastic Surgery
• /
• v.34 no.1
• /
• pp.99-104
• /
• 2007

Purpose: Subfascial augmentation mammaplasty was introduced by Dr. Graf in 2000. Subfascial placement of breast implants for augmentation was advocated as an option that has some of the advantages of both the subpectoral and subglandular placement while minimizing the disadvantages of each. The clinical experiences of 23 breast augmentations in the subfascial placement are reported. The indications for this technique are proposed. The incidence of complications is described from clinical experiences and compared with that of other methods. Methods: From January of 2004 through December of 2005, 23 patients underwent periareolar subfascial augmentation mammaplasty. The mean postoperative follow-up time was 8 months. Results: In comparing the results of the subpectoral augmentation group(57 patients) with those of the dual plane(124 patients) and subfascial groups(23 patients), the total rate of complications didn't represented the significant difference. The benefits of this technique include avoiding hematoma(as seen in the dual plane) and muscle action(in the subpectoral), and minimizing postoperative chest pain(inherent to subpectoral), and the ability to correct ptosis. And also this subfascial technique can be used for changing the plane from submuscular to subfascial in case of the reoperations. Conclusion: We're thinking that the periareolar subfascial augmentation mammaplasty would be the very useful tool for the primary and secondary breast augmentations.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.12
• /
• pp.1115-1121
• /
• 2012

This paper proposes a method to extract accurate plane of an object in unstructured environment for a humanoid robot by using a laser scanner. By panning and tilting 2D laser scanner installed on the head of a humanoid robot, 3D depth map of unstructured environment is generated. After generating the 3D depth map around a robot, the proposed plane extraction method is applied to the 3D depth map. By using the hierarchical clustering method, points on the same plane are extracted from the point cloud in the 3D depth map. After segmenting the plane from the point cloud, dimensions of the planes are calculated. The accuracy of the extracted plane is evaluated with experimental results, which show the effectiveness of the proposed method to extract planes around a humanoid robot in unstructured environment.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.11
• /
• pp.2676-2683
• /
• 1993

Plane strain punch stretching test(PSST) was performed for various automotive steel sheets. To clarify the effect of tensile properties on plane strain stretchability, the limiting punch height(LPH) values were obtained in plane strain punch stretching test and related to the tensile properties of the materials. The results show that the total elongation El and work hardening exponent n compared to other parameters obtained from tensile test well correlate with the LPH value. In comparision with the Erichsen test and LDH test the PSST can be statistically used as an alternative in assessing the stamping formability of automotive steel sheets with the advantages of good reproducibility and easy testing method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.1
• /
• pp.42-47
• /
• 2003

Nonlinear models for a thin ring rotating at a constant speed are developed. The geometric nonlinearity of displacements is considered by adopting the Lagrange strain theory for the circumferential strain. By using Hamilton’s principle, the coupled nonlinear partial differential equations are derived, which describe the out-of-plane and in-plane bending, extensional and torsional motions. The natural frequencies are calculated from the linearized equations at various rotational speeds. Finally, the computation results from the nonlinear models are compared with those from a linear model. Based on the comparison, this study recommends which model is appropriate to describe the behavior of the rotating ring.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.5
• /
• pp.202-206
• /
• 2010

Single crystals of $ZnWO_4$ were grown successfully in the [100], [010] and [001] directions using the Czochralski method. The growth parameters and the formation of slip plane in $ZnWO_4$ crystals were studied. $ZnWO_4$ crystals had a cleavage plane of (010). The dislocation density on the (010) plane at the center of the crystal was lower than that of the edge region. It was inferred that the high density at the edge of the crystals was caused by the thermal gradient during crystal growth. The etch pit arrangement revealed the (100) slip plane to be most active during crystal growth.