• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.12
• /
• pp.49-57
• /
• 2001

In this paper, equivalent circuit model and novel model parameter extraction method of a silicon(Si) substrate are presented. Substrate coupling through Si-substrate is quantitatively investigated by analyzing equivalent circuit with operating frequency and characteristic frequencies (i.e., pole and zero frequency) of a system. For the experimental verification of the equivalent circuit and parameter extraction method, test patterns are designed and fabricated in standard CMOS technology with various isolation distances, substrate resistivity, and guard-ring structures. Then, these are measured in l00MHz-20GHz frequency range by using vector network analyzer. It is shown that the equivalent-circuit-based HSPICE simulation results using extracted parameters have excellent agreement with the experimental results. Thus, the proposed equivalent circuit and parameter extraction methodology can be usefully employed in mixed-signal circuit design and verification of a circuit performance.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.271-273
• /
• 1999

In this paper 30 kVA Super-Conducting Generator's test and analysis results of OCC and SCC are presented. Also the test and FE analysis results of the generator under 1.2, 2.4, and 3.6[kW] load are described. For FE analysis of the generator's performance, the external circuit is coupled with the FE region. The generator's end winding reactance is obtained based on the design data, actual dimension, preliminary FE analysis, and empirical formulas. The comparison of FE analysis coupled with external circuit to the test results shows a good agreement.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.343-344
• /
• 2017

본 논문은 HVDC컨버터의 사이리스터 밸브 시험용 STC(Synthetic Test Circuit)의 전류원 특성을 개선하기 위한 제어기법을 제안한다. 기존의 저전압-대전류 회로의 보조스위치를 이용하여 사이리스터 밸브의 턴-오프 시 전류 하강 시간을 턴-온 시 전류 상승 시간과 유사하게 제어한다. 제안하는 기법에 대해 설명하고, 시뮬레이션을 통해 제안하는 기법의 타당성을 검증하였다.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.6-8
• /
• 1993

In this paper, we proposed a new method which does not need no load test for the characteristics analysis of linear induction motor. A new equivalent circuit of LIM is chosen and a method of determining its constants from results of the lock test is discussed. The calculated results were satisfactorily agreed with experimental results and conventional method.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.540-542
• /
• 1993

In this paper, we proposed a new method which does not need no load test for the characteristics analysis of linear induction motor. A new equivalent circuit of LIM is chosen and a method of determining its constants from results of the lock test is discussed. The calculated results were satisfactorily agreed with experimental results and conventional method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.09a
• /
• pp.82-88
• /
• 2001

Manufactured easy elevator can drives from the first floor to fifth floor as sequence control circuit in cause opening than existing equipment of experiment and practice, the structure of in the first implementation process are hand-worked control component with push-button, L/S and relay, it is structured a lamp to express that the door open and moving of cage by mechanical action of For/Rev motor-braker of which load. The second structure of implement process to control from the first floor to the fifth floor with the PLC elevator program can control by the sensor of hand-operated function of L/Sl~L/S5 in time that the S/Wl~S/W5 of PLC control panel operates to the For/Rev. The function of two kind process that an elevator is driven by PLC program and the sequence control relay circuit is a mechanical relay sequence control field and it is equipment apparatus of it to get appropriately the technology of For/Rev in that mechanical operating cause of a load using the PLC program. Also the wring circuit using a plug, dissembly. the circuit and the principle of component, and PLC program with the function test can be used the implementation field to the total technology theory about FA.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.3
• /
• pp.139-143
• /
• 2014

In this paper, an integrated low-voltage control circuit is introduced for a charge pump DC-DC boost converter. By exploiting the advantage of the integration of the feedback control circuit within CMOS technology, the charge pump boost converter offers a low-current operation with small ripple voltage. The error amplifier, comparator, and oscillator in the control circuit are designed with the supply voltage of 3.3 V and the operating frequency of 1.6~5.5 MHz. The charge pump converter with the 4 or 8 pump stages is measured in simulation. The test in the $0.35{\mu}m$ CMOS process shows that the load current and ripple ratio are controlled under 1 mA and 2% respectively. The output-voltage is obtained from 4.8 ~ 8.5 V with the supply voltage of 3.3 V.

• Progress in Superconductivity and Cryogenics
• /
• v.6 no.3
• /
• pp.33-37
• /
• 2004

This paper presents the construction and test results of an HTS induction motor. End rings and short bars were made of HTS tapes, To increase the efficiency and starting torque, HTS tapes can be used as the rotor bars. Because large current is induced in the rotor circuit, HTS tapes quench and high starting torque can be obtained. As the speed of rotor builds up. HTS tapes which are used as short bars become superconducting state again. After the HTS tapes recover from quench, resistance of the rotor circuit is nearly zero. In that case, power loss in rotor circuit is eliminated. Stator of the conventional induction motor was used as the stator of the HTS motor. Rated capacity of the conventional motor was 0.75 kW. Performances of the HTS induction motor were compared with those of the conventional motor with same volume and specification. Test result showed that the speeds of the HTS induction motor were the same with synchronous speed up to 2.6 Nm and 1.788 rpm at 9.7 Nm. It guarantees the high efficiency of the HTS motor. Starting torque of the HTS motor was more than twice of the conventional motor.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.8
• /
• pp.1053-1058
• /
• 2013

Because of computational burden and complex topology of substation, a transmission overload relief using circuit-breaker switching was very complex and difficult. However, a on-line algorithm for reducing the overloads in transmission lines has made progress due to the advance of IT technology. This paper describes the methodology for alleviating the overloads in transmission lines by circuit-breaker switching. First, the severe contingency lists and substations were selected from the results of contingency analysis. Then the switch combinations are determined using circuit-breakers of the selected substation. The topology changes are limited to equipment outage, bus split, island split, bus merge and island merge. Finally, the fast screening and full analysis methods are used to analyze the overload in transmission lines. To verify the performance of the proposed methodology, we performed a comprehensive test for both test system and large-scale power systems. The results of these tests showed that the proposed methodology can accurately alleviate the overloads in transmission lines from online data and can be applied to on-line applications.

• The KIPS Transactions:PartA
• /
• v.9A no.1
• /
• pp.53-60
• /
• 2002

This paper describes a Gray Mode Graphic STN LCD drive circuit using USB interface. The drive circuit using USB interface can highly transfer image data created under PC t LCD. Hence, the LCD drive circuit doesn't use microprocessor for the convenience of users. The proposed LCD drive circuit part have been verified by simulation and by ALTERA EPF10K10TC144-3 FPGA implementation in VHDL. The USB interface part have been programmed in MS-Visual C++ 6.0. The validity and efficiency of the proposed LCD drive circuit have been verified by test board. After comparing this LCD drive circuit to specify it was verified that the developed LCD drive circuit showed good performances, such as convenience of users, low cost.