• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.309-310
• /
• 2008

In this paper, we propose a novel D-ATR (Differential-Average Transmitted Reference) scheme for UWB (Ultra Wide Band) based on impulse radio. The proposed scheme utilizing differential coding at transceiver, does not cause half loss of data rate unlike the conventional TR (Transmitted Reference) and ATR (Average TR) systems which transmit additional reference signals. In addition, the proposed scheme may provide improved BER (Bit Error Rate) performance by averaging the received reference signals like the conventional ATR. The proposed D-ATR receiver produces the averaged reference template by considering both the detected data bit and the differential coding rule.

• ETRI Journal
• /
• v.28 no.1
• /
• pp.91-94
• /
• 2006

Impulse radio (IR) is a competitive candidate for ultra-wideband (UWB) systems. In this letter, we evaluated the coexistence of an IR-UWB system based on an orthogonal sinusoidal correlation receiver (OSCR) with an IEEE 802.11a WLAN through a detailed simulation. The coexistence performance of the two systems is characterized in terms of the receiver's bit-error rates. Then, some approaches to interference mitigation are discussed.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.594-598
• /
• 2003

In this paper, we analyze the performance of UWB(Ultra-WideBand) communication system employing Bi-phase modulation and RAKE Receiver under the MAI(Multiple Access Interference) and the OSI(Other System Interference) environment. Using the multi-path channel model recommended by IEEE P802.15.TG3a, the performance degradation Is described with the number of users, the number of RAKE fingers and training sequences. To meet BER 10e-4 for 20 users at the same time, the number of RAKE fingers are proposed from 3 to 32. And the number of training sequences are limited less than 8 to keep the channel estimation error within 3dB

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2000.11a
• /
• pp.94-98
• /
• 2000

This paper describes an application of the partial discharge measuring method in operating transformer. In the operating transformer, the useful PD signal may be superimposed by radio intereference voltage and impulse shaped noise signals generated by external corona or power electronics. In this paper, initial investigations after connecting the PD measuring system to the terminals of the measuring impedance showed a very high noise level of 3,700pC due to sinusoidal interferences. In order to reject these noises, this paper applied RIV and band-pass filters and noise gating method. The resulting measuring sensitivity was improved from 3,700pC to 160pC.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.727-731
• /
• 2001

된 논문에서는 임펄스 잡음과 다중접속간섭(MUI) 및 나카가미 페이딩 환경으로 모델링되는 FH/CDMA 시스템을 제안하고 이의 성능을 분석하였다. 결과에 의하면 FH-CDMA 시스템은 잡음이나 페이딩의 영향보다는 여러명의 사용자가 같은 시간에 같은 주파수를 사용함으로 인한 충돌과 임펄스 잡음에 의해 더 큰 영향을 받는다. 성능 개선기법으로 다이버시티 기법과 에러정정 부호화 기법을 사용함으로써 페이딩과 다중접속 간섭에 대하여 어느 정도의 개선효과를 보이지만 임펄스 잡음의 영향으로 무선 데이터 통신을 만족하는 시스템 성능을 가질수 없었다. 따라서 한번의 재전송만을 고려한 Truncated Type-II Hybrid ARQ기법을 동시에 채용함으로써 다중접속 간섭과 임펄스 잡음에 의한 전송에러를 감소시키고 고신뢰도의 무선 데이터 통신을 만족하는 시스템 성능을 보임을 알 수 있었다.

• Journal of information and communication convergence engineering
• /
• v.7 no.3
• /
• pp.286-291
• /
• 2009

In this paper, the performance of ultra-wideband (UWB) single input multiple output (SIMO) systems to achieve high data rate communications is studied in dense multipath environments. The effects of spatial and temporal diversities on the performance of multi-user time-hopping UWB systems using binary pulse position modulation (2PPM) are analyzed. The reduced-complexity Rake receivers based on the selective combining (called SRake) and partial combining (called PRake) are considered. The theoretical and simulation results show that the BER performance of the UWB system can be enhanced as the number of array elements and/or Rake fingers increases. Moreover, we observe that SRake is more effective for the IR-UWB systems to achieve a good BER performance, as compared with PRake.

• Journal of Digital Contents Society
• /
• v.5 no.3
• /
• pp.171-175
• /
• 2004

In this paper, We applied CCI canceller to remove multi-user interference in co-channel environment and improved performance of TH PPM UWB-IR system. As a result, We could get reception performance that data transmission of high speed is available in small reception power applying CCI canceller. Also, We could get permission available channel capacity to maximum access number 40 in high speed transmission environment more than 100Mbps.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.415-424
• /
• 2016

This paper describes a high data rate proximity transmitter design for high resolution smartphone-mirrored display applications. A 2 Gb/s transmitter is designed with a low transmission power of -70 dBm/MHz and a wide bandwidth of nearly 3 GHz. A digital pre-correction method is employed in the transmitter to mitigate the inter-symbol interference problem. A carrier-based digital pulse shaping and a reconfigurable digital envelope generation methods are employed for robust operation by utilizing 20 phases from a 2 GHz phase-locked loop. A 6.5-9.5 GHz transmitter implemented in 65 nm CMOS achieves the maximum data rate of 2 Gb/s, consuming only 7.6 mW from a 1 V supply.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2339-2341
• /
• 2005

본 논문은 주파수 영역과 시간 영역에서 초광대역 (Ultra Wideband UWB) 안테나의 임펄스 응답 특성을 고려한 채널측정 연구에 대해 발표하고자 한다. 임펄스 전파 채널 측정을 위해 UWB conical monopole 안테나를 설계하였고, 설계한 안테나의 임펄스 응답을 도출하였다. 안테나의 특성이 임펄스 전파 채널측정에 주는 영향을 무반향 반사실에서 다중경로 환경과 무반사 환경을 구현하여 측정하였다. 측정을 통하여 안테나의 dispersive한 특성과 ringing이 임펄스 전파 채널에 영향을 미침을 확인했고, 이러한 결과를 바탕으로 정확한 임펄스 채널 측정을 위해 사용한 UWB 안테나의 특성을 고려해야 함을 확인하였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2018.11a
• /
• pp.29-32
• /
• 2018

본 논문에서는 IR-UWB(Impulse-Radio Ultra Wideband) 레이더와 서보 모터를 이용한 실내 환경의 물체 위치(거리, 각도) 탐지 방법을 제안한다. 기존의 카메라나 적외선을 사용한 기술은 비용이 비싸고 장애물이 있을 시 측정이 어려워 정확도가 떨어지는 단점을 가지고 있다. 반면 IR-UWB 레이더는 저 전력, 저 가격, 소형으로 구현이 가능하고 광대역을 사용하여 투과성이 좋다는 장점을 가져 실내 환경의 물체 움직임 탐지에 적합하다. 하지만 IR-UWB 레이더를 이용한 물체 탐지 시 각도 측정 없이 거리만을 측정하기 때문에 물체의 정확한 위치를 탐지할 수 없다. 이러한 점을 보완하고자 레이더를 모터 위에 설치하고 모터를 180 도 회전시키는 방법을 사용함으로써 넓은 측정 범위를 가짐과 동시에 물체의 위치를 보다 정확히 탐지해내는 결과를 보였다.