• 제목/요약/키워드: impression tray

검색결과 82건 처리시간 0.027초

완전 무치악 환자에서 하악 흡착 의치를 통한 총의치 수복 증례 (Complete denture rehabilitation of edentulous patient using mandibular suction denture: a clinical report)

  • 임서련;서윤희;김현영;송영균;이준석
    • 대한치과보철학회지
    • /
    • 제52권4호
    • /
    • pp.346-351
    • /
    • 2014
  • 흡착 의치는 의치상연 주위 전체를 가동 점막으로 봉쇄하여 연하나 교합 시 의치상 내면에 일시적으로 음압을 형성하여 의치의 유지와 안정을 강화한다. 본 증례의 환자는 81세의 남자 환자로 새로운 의치를 제작하고 싶다는 주소로 내원하였다. 의치의 유지와 저작 효율에 대한 환자의 높은 요구도를 고려하여 흡착 의치를 통한 총의치 제작을 계획하였다. 하악 후구치 융기 부위를 가압하지 않은 채로 예비 인상을 채득 후 상하악 진단모형을 제작하였다. 이후 개인 트레이 제작 후 최종 인상 채득과 동시에 고딕 아치 기록을 시행하여 중심위 및 수직 고경을 채득하였으며, 상악에는 해부학적 치아, 하악에는 비해부학적 치아를 배열하여 설측 교합을 형성하였다. 이상과 같이 완전 무치악 환자에서 하악 흡착 의치를 통한 총의치 수복은 만족스러운 유지와 기능을 회복할 수 있었기에 본 증례를 보고하고자 한다.

기존 임시의치와 디지털 안궁이전을 이용하여 상하악 CAD-CAM 총의치 수복 증례 (Fabrication of CAD-CAM complete denture using existing provisional denture and digital facebow transfer)

  • 노재혁;방혜민;박상원;임현필;윤귀덕;박찬
    • 대한치과보철학회지
    • /
    • 제61권4호
    • /
    • pp.268-274
    • /
    • 2023
  • 본 증례는 요양병원에 입원치료 중인 환자에서 치과에 내원하기 힘든 점과 의치 분실이 많은 점을 고려하여 내원 횟수를 감소시키고 재제작이 쉬운 CAD-CAM 총의치를 제작하였다. 환자가 적응한 기존 임시의치의 형태 및 수직고경, 악간관계를 최종의치 제작에 반영하기 위해 기존 임시의치를 스캔하고 프린팅한 개인트레이로 폐구인상을 채득하였다. UTS CAD를 이용하여 디지털 안궁이전하고 CAD 소프트웨어에서 치아배열 후 상하악 총의치를 단일 구조의 디스크로 의치상과 인공치를 한번에 절삭하여 제작하였다.

안면스캔 데이터와 임시의치를 복제한 개인 트레이를 활용하여 CAD/CAM을 통한 monolithic disc로 제작한 총의치 수복: 증례 보고 (Fabrication of complete dentures made with monolithic discs through CAD/CAM using facial scan data and individual tray duplicating temporary denture: a case report)

  • 김주현;신수연
    • 구강회복응용과학지
    • /
    • 제39권3호
    • /
    • pp.158-167
    • /
    • 2023
  • 최근 치의학 분야에서 디지털 기술이 발달함에 따라 computer-aided design-computer-aided manufacturing (CAD/CAM)을 이용한 의치 제작 진료 단계의 변화를 가져왔다. CAD/CAM 기술을 이용한 의치 제작 방식은 제작기간과 내원 간격의 단축으로 임상적인 효율성과 편리함을 제공함과 동시에 기공을 단순화하여 오류 발생을 감소시켰다. 본 증례는 복잡한 병력과 신체적 장애를 가진 환자에게 기존의 임시의치를 디지털 방식으로 복제 및 출력하여 개인 트레이로 활용하였고, 부가중합형 실리콘 인상재로 채득한 최종 인상체에는 수직고경과 중심위, 상악 전치부의 각도 및 길이에 대한 정보가 포함되어 있으며 이를 통해 제작 기간과 내원 간격을 단축하여 환자의 만족도를 높일 수 있었다. 최종 의치는 밀링 방식 및 monolithic disc를 이용하여 제작하였고, 적절한 안정과 유지, 지지를 보여 기능적, 심미적으로 만족스러운 결과를 얻을 수 있었다.

3D 프린팅을 이용한 양악 총의치 제작 증례 (Fabrication of complete denture using 3D printing: a case report)

  • 이은수;박찬;윤귀덕;임현필;박상원
    • 대한치과보철학회지
    • /
    • 제60권2호
    • /
    • pp.202-210
    • /
    • 2022
  • 최근 디지털 치의학의 발달로, Computer-aided design-Computer-aided manufacturing (CAD-CAM)을 이용한 의치 제작이 증가하는 추세이다. CAD 소프트웨어를 통해 디자인된 의치를 제작하는 방식에는 밀링을 이용한 절삭가공방식과 3D 프린팅과 같은 적층가공방식이 있으며, 적층가공방식은 보다 복잡한 구조를 재현하는데 유리하게 사용될 수 있다. 본 증례는 뇌경색으로 인해 신체적 장애를 갖게 된 상·하악 완전무치악 환자에서 제작 기간과 내원 간격을 단축하기 위해 광경화 Stereolithography (SLA) 기반의 3D 프린팅을 이용한 디지털 제작 방식의 양악 총의치 수복 증례이다. 최종인상채득을 위해 기존 임시의치를 디지털 방식으로 복제 및 출력하여 개인트레이로 활용하였고, 부가중합형 실리콘 인상재로 채득한 최종인상체에는 수직고경과 중심위, 상악 전치부의 각도 및 길이에 대한 정보가 포함되었다. 또한 임시의치를 장착하고 촬영한 안면 스캔 데이터를 추가로 획득하여 기공 작업 시 교합평면 결정이나 인공치 배열에 참고할 수 있도록 하였다. 인상체를 3차원 스캔 후 CAD 프로그램을 통해 인공치를 배열하였고, 연마면을 형성하여 의치 디자인을 완성하였다. 시적 의치 및 최종 의치는 FDA 승인을 받은 액체 광경화성 레진을 이용하여 SLA 기반 3D 프린터로 출력하였고, 최종 의치는 적절한 안정과 유지, 지지를 보였으며, 기능적, 심미적으로 만족스러운 결과를 얻을 수 있었다. 최종 의치의 전달까지 3회의 내원 횟수를 필요로 하였으며, 기공시간의 단축으로 내원 간격을 줄임으로써 환자의 만족도를 증진시켰다.

스캔 및 밀링을 통해 기존 의치를 복제한 개인트레이를 이용한 흡착식 의치 제작 증례 (Fabrication of suction denture by using the individual tray duplicated an existing denture through scan and milling process: A case report)

  • 박민혁;기원진;양홍서;박상원;윤귀덕;박찬
    • 대한치과보철학회지
    • /
    • 제58권3호
    • /
    • pp.221-227
    • /
    • 2020
  • 완전무치악 환자의 경우 하악 치조골 흡수가 진행됨에 따라, 과거 만족스러운 기능을 보였던 기존 총의치의 유지 및 안정이 저하된다. 총의치 재제작이 요구됨에도 불구하고, 증령 및 전신질환 등의 영향으로 향후 겪어야 할 진료의 기간과 강도에 대한 신체적 부담으로 인해 새 의치의 제작을 주저하는 경우가 많다. 이러한 완전무치악 환자들의 경우에는 치료에 들어가기에 앞서, 내원의 횟수를 줄이면서, 새 의치에 대한 적응기간도 줄일 수 있는 치료목표 또한 함께 고려해야 할 필요성이 있다. 본 증례는 신체적 능력이 저하된 고령의 완전무치악 환자의 총의치 제작 증례로서, Sato가 제시한 예비 및 정밀 폐구기능인상을 통해 흡착식 의치를 제작함과 동시에, CAD/CAM을 활용하여 기존의치의 교합적 기능정보를 이전함으로써 새 의치에 대한 적응을 용이하도록 하였다.

무치악 잔존치조제의 형태학적 연구 (A MORPHOLOGICAL STUDY ON RESIDUAL ALVEOLAR RIDGES OF EDENTULOUS JAWS)

  • 최호영;우이형;최대균
    • 대한치과보철학회지
    • /
    • 제29권1호
    • /
    • pp.73-89
    • /
    • 1991
  • Impression ragistration is an improtant and difficult phase of prosthodontic treatment procedures and a tray of appropriate size and shape is essential to obtain the accurate impression. Particularly, in edentulous patients, the size and forms of their residual alveolar ridges are different from one another. Therefore, in this study, various measurements were taken on the edentulous models. And the measurements were analyzed and compared with one another. The results were as follows ; 1. The mean of denture bearing area was $32.86cm^2$ in the upper jaws, $24.20cm^2$ in the lower jaws and the variation of denture bearing area was greater in the upper than in the lower jaws and in males than in females. 2. The mean of A-P(anteroposterior) ridge length was 48.72mm in the upper jaws, 53.05mm in the lower jaws and that of males was longer than that of females. 3. The mean of most posterior ridge width was 47.23mm in the upper jaws, 58.03mm in the lower jaws and the difference of that between males and females was least in both jaws. 4. In the upper jaws, the mean of ridge width was 29.66mm on anterior 1/4, 42.79mm on middle, 48.95mm on posterior 1/4 line and the mean of palatal height was 4.56mm on anterior 1/4, 10.01mm on middle, 10.84mm on posterior 1/4 line. 5. In the lower jaws, the mean of ridge width was 33.24mm on anterior 1/4, 50.19mm on middle, 59.16mm on posterior 1/4 line and the mean of lingual ridge height was 5.49mm on anterior 1/4, 9.16mm on middle, 16.72mm on posterior 1/4 line. 6. The correlation coefficient(=r) between denture bearing area and A-P ridge length was 0.83 in the upper jaws and 0.75 in the lower jaws. The corelation between denture bearing area and AP ridge length was statistically significant, but, between denture bearing area and A-P ridge length and between A-P ridge length and the most posterior ridge width was not statistically significant in both jaws. 7. Alveolar ridge forms were classified into three(ovoid, "u" shape, and "v"shape) categories. In the upper jaws, ovoid was 66%, "u" shape was 24%, and "v" shape was 10%, in the lower jaws, ovoid was 66.7%, "u" shape was 20%, and "v" shape was 13.3%.

  • PDF

치성 점액종 환자의 총의치 수복증례 (Fabrication of complete dentures for a patient with odontogenic myxoma: A case report)

  • 정다운;김현희;배정윤
    • 대한치과보철학회지
    • /
    • 제56권1호
    • /
    • pp.64-69
    • /
    • 2018
  • 치성점액종은 악골에 드물게 발생하는 양성 치성 종양이다. 본 증례의 60대 무치악 남성은 전상악부에 발생한 연조직 종괴 제거를 주소로 내원하였으며 절제 생검 결과 치성 점액종으로 확진되었다. 외과적 제거 후 잔존한 가동조직의 변형을 최소화 하기 위해 고안된 투명 레진 트레이로 인상을 채득하였다. 악간관계기록 및 납의치 시적시에 중립대 영역을 설정하고 기능적 연마면 형태를 인기하여 총의치의 안정성과 유지력을 증진시킬 수 있었다. 치성 점액종 제거 후 가동조직과 중립대를 고려하여 심미적, 기능적으로 만족스러운 총의치를 제작하였기에 이를 보고하는 바이다.

적층가공방식을 이용한 열가압 세라믹 라미네이트 비니어의 적합도: 3차원 분석 (Fitness of heat - pressed ceramic laminate veneer using additive manufacturing process: 3 Dimensional analysis)

  • 강신영;이하나;김어빈;이경은;김지환;김웅철
    • 대한치과기공학회지
    • /
    • 제39권3호
    • /
    • pp.137-143
    • /
    • 2017
  • Purpose: The purpose of this study is to analyze the fitness of heat - pressed ceramic laminate veneers fabricated using the additive manufacturing. Methods: Impression was replicated by using light body silicone and heavy body silicone on the custom tray, and it was fabricated using Type IV Stone. The test specimens were prepared by using a dental scanner, a laminating veneer using a dental design program, and a specimen with a 3D printer. The control specimens were prepared by the lost wax technique and heat - pressed to fabricate the specimens. The data of the specimens were measured by the RMS value of the internal fitness a using a 3-dimensional measurement program. Results: The Stereolithography laminate veneer group was measured at $78.10(4.09){\mu}m$ and the LWV group was measured at $31.50(5.10){\mu}m$. There is a significant difference between the two groups (p<0.001) Conclusion : Evaluation of fitness laminate veneers was fabricated by additive manufacturing showed the difference statistically significantly and clinically acceptable result.

성인 유치악자 상악골의 악궁과 치열궁의 형태에 관한 조사 (A STUDY OF INTRAORAL ANATOMIC LANDMARKS OF KOREAN ADULT-UPPER JAW)

  • 오유리;이성복;박남수;최대균
    • 대한치과보철학회지
    • /
    • 제33권4호
    • /
    • pp.753-768
    • /
    • 1995
  • For accurate impression taking of dental patient and esthetic denture treatment of ednetulous patient, measuring between intraoral anatomic landmarks is useful.In this study the subjects selected at a random were two-jundred forty persons with a mean age 22.5(range 21-24) and were taken impression of by irreversible hydrocolloid impression material(Alginate). On the study model made by dental stone, each individual tray was made and final impresion was taken by border moilding. On final model measurings were performed with 3-dimensional measuring device and the values were analyzed by t-test The results is following : ABOUT THE MEASURED VALUES. 1. The width between maxillary right and left canine cusp tip was average 36.44mm(s.d. 2.48), man 36.67mm, woman 35.83mm(p<0.05). 2. The width between labial height of contour of maxillary right and left canine was average 40.08mm(s.d. 2.42), man 40.29mm, woman 39.52mm(p<0.05). 3. The width between mesio-lingual cusps of maxillary first molar was average 43.14mm(s.d. 3.33), man 43.56mm, woman 42.05mm(p<0.05). 4. The width between buccal alveolar ridge on axis of mesiolingual cusp of right and left maxillary first molar was average 64.89mm(s.d. 3.88), man 65.58mm, woman 62.92mm(p<0.05). 5. The width between buccal alveolar ridge on axis of mesiolingual cusp of right and left maxillary second molar was average 68.58mm(s.d. 3.91), man 69.29mm, woman 66.30mm (p<0.05). 6. The width between right and left hamular notch was average 49.80mm(s.d. 3.96), man 50.70mm, woman 48.20mm(p<0.05). 7. The length from labial heigth of contour of maxillary central incisor to center of incisive papilla was average 9.52mm(s.d. 1.18), man 9.46mm, woman 9.63mm(p>0.05). 8. The length from labial heigth of contour of maxillary central incisor to palatine fovea was average 53.27mm(s.d. 2.93), man 53.93mm, woman 52.08mm(p<0.05). 9. The center of incisive papilla ws located posterior to intercanine line at 0.40mm(s.d. 1.16), man 0.51mm, woman 0.11mm(p<0.05). 10. The height from incisal edge of maxillary central incisor to the labial vestibule was average 21.84mm(s.d. 1.38), man 22.01mm, woman 21.00mm(p<0.05). 11. The height from mesiolingual cusp of maxillary first molar to buccalvestible was average 17.45mm(s.d. 1.42), man 17.56mm, woman 17.08mm(p>0.05). 12. The height from hamular notch to standard occlusal plane was average 6.84mm(s.d. 1.06), man 6.91mm, woman 6.70mm(p>0.05). 13. The height from the deepest point of palatal vault to standard occlsalplane was average 19.95 mm(s.d. 2.03), man 20.19mm, woman 19.12mm(p<0.05). ABOUT THE ARCH FORM 1. The arch form was able to classify into four typr by the rate of the measured values. Each arch form distribution was that the 1 group had 32.46% the 2 group 2.19%, the 3 group 52.83%, the 4 group 12.72%. The sexual composition was that in 1 group man had 73.5%, woman 26.5%, in 2 group man had 40.0%, woman 60.0%, in 3 group man had 83.3%, woman 16.7%, and in 4 group man had 55.17%, woman 44.83%. 2. When canine cusp tip was marked as point O, the intersection point between labial height of contour of maxillary central incisor and intermaxillary suture as point A, height of contour of maxillary second molar buccal alveolar ridge as B point, ${\angle}$AOB was measured $133.8^{\circ}$for the 1 group, $133.0^{\circ}$for the 2 group, $132.3^{\circ}$for the 3 group, $128.9^{\circ}$for the 4 group.

  • PDF

의치진료 경험 후 치과대학 학생들의 임상진료능력에 대한 자기인식도 (Dental students' clinical confidence in denture treatment after clinical experiences)

  • 이보라;심준성;이재훈;김종은;박지만;김지환
    • 대한치과보철학회지
    • /
    • 제58권3호
    • /
    • pp.185-192
    • /
    • 2020
  • 목적: 본 연구의 목적은 의치치료 경험이 있는 치과대학 학생들을 대상으로 임상진료능력에 대한 자기인식도를 조사하는 것이다. 재료 및 방법: 2019학년도 치과대학 본과4학년 학생 58명 중 설문에 응한 50명의 학생을 대상으로 하였다. 설문 문항은 치료계획 수립 및 보철 전 치료과정 (4문항), 의치 임상 및 기공과정 (20문항), 의치 임상교육 부분 (4문항)으로 구성하였다. 각 문항은 5점 척도로 응답하도록 하였고, 각 문항에서 4점과 5점('그렇다'와 '매우 그렇다')의 응답비율을 긍정응답률로, 1점과 2점('그렇지 않다'와 '매우 그렇지 않다')의 응답비율을 부정응답률로 분류하였다. 결과: 단계별 진료과정에 대한 설문에서 긍정응답률은 모두 60% 이상으로 전반적으로 학생들의 자기인식도는 높았다. 그러나 졸업 후 독립적인 의치 치료 수행능력에 대해서는 긍정응답률이 48%로 다소 낮았다. 환자관리, 의치에 대한 주의사항 설명, 개인트레이 제작, 박싱 및 작업모형 제작 항목이 긍정응답률이 가장 높았고, 치료계획수립, 최종인상 채득, 서베잉이 가장 낮았다. 결론: 의치치료 경험이 있는 치과대학 학생들은 의치치료 수행능력에 대한 자기인식도는 높은 편이었으나 독립적인 수행능력 증진을 위해서는 교육이 더 필요하다는 것을 알 수 있었다.