• The Journal of Advanced Prosthodontics
• /
• 제8권5호
• /
• pp.354-362
• /
• 2016

PURPOSE. The trueness and precision of acquired images of intraoral digital scanners could be influenced by restoration type, preparation outline form, scanning technology and the application of power. The aim of this study is to perform the comparative evaluation of the 3-dimensional reproducibility of intraoral scanners (IOSs). MATERIALS AND METHODS. The phantom containing five prepared teeth was scanned by the reference scanner (Dental Wings) and 5 test IOSs (E4D dentist, Fastscan, iTero, Trios and Zfx Intrascan). The acquired images of the scanner groups were compared with the image from the reference scanner (trueness) and within each scanner groups (precision). Statistical analysis was performed using independent two-samples t-test and analysis of variance (${\alpha}=.05$). RESULTS. The average deviations of trueness and precision of Fastscan, iTero and Trios were significantly lower than the other scanners. According to the restoration type, significantly higher trueness was observed in crown and inlay than in bridge. However, no significant difference was observed among four sites of preparation outline form. If compared by the characteristics of IOS, high trueness was observed in the group adopting the active triangulation and using powder. However, there was no significant difference between the still image acquisition and video acquisition groups. CONCLUSION. Except for two intraoral scanners, Fastscan, iTero and Trios displayed comparable levels of trueness and precision values in tested phantom model. Difference in trueness was observed depending on the restoration type, the preparation outline form and characteristics of IOS, which should be taken into consideration when the intraoral scanning data are utilized.

• Imaging Science in Dentistry
• /
• 제45권1호
• /
• pp.23-29
• /
• 2015

Purpose: This study aimed to assess the reliability of measurements performed on three-dimensional (3D) virtual models of maxillary defects obtained using cone-beam computed tomography (CBCT) and 3D optical scanning. Materials and Methods: Mechanical cavities simulating maxillary defects were prepared on the hard palate of nine cadavers. Images were obtained using a CBCT unit at three different fields-of-views (FOVs) and voxel sizes: 1) $60{\times}60mm$ FOV, $0.125mm^3$ ($FOV_{60}$); 2) $80{\times}80mm$ FOV, $0.160mm^3$ ($FOV_{80}$); and 3) $100{\times}100mm$ FOV, $0.250mm^3$ ($FOV_{100}$). Superimposition of the images was performed using software called VRMesh Design. Automated volume measurements were conducted, and differences between surfaces were demonstrated. Silicon impressions obtained from the defects were also scanned with a 3D optical scanner. Virtual models obtained using VRMesh Design were compared with impressions obtained by scanning silicon models. Gold standard volumes of the impression models were then compared with CBCT and 3D scanner measurements. Further, the general linear model was used, and the significance was set to p=0.05. Results: A comparison of the results obtained by the observers and methods revealed the p values to be smaller than 0.05, suggesting that the measurement variations were caused by both methods and observers along with the different cadaver specimens used. Further, the 3D scanner measurements were closer to the gold standard measurements when compared to the CBCT measurements. Conclusion: In the assessment of artificially created maxillary defects, the 3D scanner measurements were more accurate than the CBCT measurements.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제46권2호
• /
• pp.116-124
• /
• 2020

Objectives: Postoperative nausea and vomiting (PONV) is considered as one of the most incessant and anguishing factors for patients who have surgery under general anesthesia. The occurrence of PONV after orthognathic surgery can lead to dehydration, infection, bleeding at the surgical site, and patient discomfort, all of which leave a patient with a negative impression of anesthesia and surgery. The purpose of this study is to assess the incidence of PONV after orthognathic surgery and to correlate it with factors related to patient, anesthesia, and surgery. Materials and Methods: A 10-year retrospective survey was done for patients who underwent orthognathic surgery between January 2008 and March 2018. The incidence of PONV was evaluated, correlations with factors related to patient, anesthesia, and surgery were studied, and the duration between the end of surgery and the occurrence of the first episode of PONV was tabulated. Results: The medical records of 109 patients were screened, out of which 101 satisfied the inclusion criteria. Amongst these patients, 60 patients (59.4%) suffered from PONV. Patient's sex, induction agent used, intravenous fluids administered intraoperatively, duration and type of surgery, and the presence of a nasogastric tube were seen to have a significant influence on precipitating PONV. It was noted that among the patients who suffered from PONV, 61.7% of them experienced it 48-96 hours after the end of surgery. Conclusion: Despite the improved anesthetic equipments, drugs, and surgical techniques currently used, the incidence of PONV was high in our study. Certain factors that were seen to influence PONV in this study need to be considered in order to develop an efficacious protocol to reduce PONV in orthognathic surgeries.

• The Journal of Advanced Prosthodontics
• /
• 제10권4호
• /
• pp.328-334
• /
• 2018

PURPOSE. To evaluate the reproducibility of scan-based abutments using a blue light model scanner. MATERIALS AND METHODS. A wax cast abutment die was fabricated, and a silicone impression was prepared using a silicone material. Nine study dies were constructed using the prepared duplicable silicone, and the first was used as a reference. These dies were classified into three groups and scanned using a blue light model scanner. The first three-dimensional (3D) data set was obtained by scanning eight dies separately in the first group. The second 3D data set was acquired when four dies were placed together in the scanner and scanned twice in the second group. Finally, the third 3D data set was obtained when eight dies were placed together in the scanner and scanned once. These data were then used to define the data value using third-dimension software. All the data were then analyzed using the non-parametric Kruskal-Wallis H test (${\alpha}=.05$) and the post-hoc Mann-Whitney U-test with Bonferroni's correction (${\alpha}=.017$). RESULTS. The means and standard deviations of the eight dies together were larger than those of the four dies together and of the individual die. Moreover, significant differences were observed among the three groups (P<.05). CONCLUSION. With larger numbers of abutments scanned together, the scan becomes more inaccurate and loses reproducibility. Therefore, scans of smaller numbers of abutments are recommended to ensure better results.

• 한국의류산업학회지
• /
• 제5권5호
• /
• pp.511-519
• /
• 2003

The traditional culture has been developed for a long time with an unique property according to folk character, custom and environment within an area. Especially in 1906, when the westerners were interested in oriental cultures more and more, Paul Poiret presented Japanese traditional dress of napping sleeve coats and harem pants, henceforth japanese fashion theme began to rise. The Japanese style rose as an important fashion item of the modern fashion, with various fashion themes such as orientalism, ethnic, folklore, ecology, etc., needless to say of activities of Japanese designers. The revealed patterns on Japanese dress and it's ornament plays a role of expressive decoration as well as stand for the nation, the ideology of the age and aesthetic consciousness. For this reason, it is necessary to study Japanese traditional patterns expressed in modern fashion systematically. Therefore, in this research, the demonstrated Japanese traditional patterns on the modern fashion were divided into natural, artificial and complex design and were looked out the characteristic, furthermore it was studied in regard that Japanese patterns were how to apply in modern fashion. It was concluded that the characteristics of the Japanese traditional patterns presented in the modern fashion were as follows: first, creation of environmental friendly design using plenty of natural materials; second, expression of paint-like impression and beauty of margins by simplifying of patterns; third, expression of amusing design by using bright colors and print; finally, various patterns were spreaded out complicated on dress. The characteristics of Japanese traditional patterns in the above were expressed in the modern fashion.

• 복식
• /
• 제63권1호
• /
• pp.81-96
• /
• 2013

We interviewed and surveyed parents of 3 to 6-year-old boys in order to determine designs for indoor apparel that appealed to toddlers. In addition, on the basis of the behavioral characteristics of such boys, improvements in the development of indoor apparels were suggested. Parents preferred indoor apparels because it could be worn as underwear when the kid is outdoors and as outerwear when indoors. These apparels were popular with toddlers. Therefore, indoor apparel that gives the impression of outerwear while performing the function of underwear was designed. Underwear fabric was used, but outerwear apparel design was partially adopted. In order to improve the activity, fabric that could be stretched in any direction was used for the sleeves and pant legs, while organic fabric with soft texture was used for the trunk part of the apparel. Dark-colored material was used for the chest and elbow parts of the clothes in order to prevent contamination in these parts. In particular, a bib was used to prevent contamination in the chest part. Given that toddlers engage in many activities, the fabric needed to be durable, so this led to thick materials being used for the knee part. As certain parents complained about the short length for tops, we increased the length of the tops by 5cm. In the survey items that investigated overall wearability, ease, and suitability for toddlers' activities, the test apparel obtained a higher score than existing apparel did. This indicates that the overall suitability of the newly designed apparel was improved.

• 한국의류학회지
• /
• 제18권3호
• /
• pp.311-326
• /
• 1994

The purpose of this study was to identify 1) the effect of two contexts (job interview, Informal outing) and clothing cues (type, style, color) on male impresssions 2) the effect of perceiver's age on male impressions created by the clothing cues and contexts. The subjects consisted of 256 male undergraduate students and 256 middle-aged men. The experimental materials developed for this study were a set of stimuli and response scales. The stimuli were 8 color photographs of drawings of a male figure in clothing which were manipulated in two levels, each of three clothing cues including type, style and color. The experimental design was full factorial design of $(2^4contex^2{\times}clothing type^2{times}clthing color^2$. Each of the 16 sub-samples includes 16 subjects from the two perceiver group. Questionnaires used to measure perceivers responses to the stimuli were 7-point semantic differential scales composed of 37 bipolar adjectives representing personal traits. The data was processed by factor analysis, ANOVA, multiple classification analysis, Duncan's multiple range test. The major findings drawn from this study were as follows: 1. Three factors emerged to account for the dimensional structure of the impressions of the male figure in clothing in two social situations. These factors involved evaluation, activity and uniqueness. 2. The contexts, clothing types and clothing styles had significant effects on evaluation, activity and uniqueness. The clothing styles had a considerable effect on both evaluation and uniqueness while the clothing types affected activity. The clothing color had least effect on the impression and had only moderate effect on evaluation. 3. Perceiver's age influenced impressions formed by the social contexts and clothing cues. Male college students were least affected by contexts and clothing cues, while middle-aged men wert affected most.

• 디자인학연구
• /
• 제13권2호
• /
• pp.65-72
• /
• 2000

자동차와 같이 스타일링이 전체 상품성에 미치는 영향이 큰 제품에서는 차체의 스타일과 동시에 BI의 디자인과 그 마무리가 매우 중요하다. 최근에는 상품의 다양화와 각종 매체의 발달에 의하여 소비자들의 브랜드에 대한 인식이 과거의 고정적이던 것에서, 여러 가지 요인들에 의하여 변화될 수 있는 가변적인 것으로 변화되어가고 있으므로 참신한 BI의 이미지 부각은 더욱 중요시된다. 초기의 자동차에서 장식품의 개념에서 시작되어 공업화와 함께 시작된 개별 브랜드의 개념이 독립화 되고 전문화되어 오늘의 BI의 형태에 이르렀다. 이에 따라 비교적 긴 역사를 가지고 있는 브랜드는 그것을 알려야 하는 요구가 상대적으로 적으나, 후발 메이커의 브랜드는 짧은 시간 내에 보다 많은 소비자에게 긍정적인 인식을 심어주는 것이 매우 중요한 과제로써 다루어지고 있다. 이에 따라 최근의 차량에 쓰이는 BI는 브랜드의 조형적인면 뿐 아니라, 재료와 공법 등에 따라 매우 다양한 형태와 방법이 나타나고 있으며, 이것은 후발 브랜드의 BI에서 단순하면서도 추상성이 강한 조령 방법과, 물리적 마무리에서도 화려한 경향을 가지는 것이 나타나고 있다.

• 과학교육연구지
• /
• 제42권1호
• /
• pp.1-11
• /
• 2018

과학, 기술, 공학, 예술, 그리고 수학을 통합한 STEAM 프로그램은 중등 교육에서 필수적인 요소로 자리 잡았고 소프트웨어 교육은 앞으로 중등학교에서 필수 이수과목으로 선정될 예정이다. 본 연구에서는 STEAM 교육과 함께 소프트웨어 교육 자료로 레고 마인드스톰 로봇 활용방안을 제안하고자 한다. 5차시로 개발된 STEAM 교육 프로그램은 차시별로 STEAM 교육에서의 핵심적인 요소를 포함하여 문제해결중심으로 구성되었고, 이를 수업에 적용하여 사례를 분석하였다. 분석 결과 레고 로봇을 활용한 STEAM 프로그램은 학생들에게 창의적인 사고와 문제해결 방법에 대해 구상 할 수 있는 기회를 제공하고 소프트웨어 교육과 과학 수업에의 활용 가능성에 대해 긍정적인 결과를 보였다. 또한 본 연구에서 개발한 프로그램은 방과 후 수업, 영재수업 등 현장에 적용 가능함을 알 수 있었다.

• 패션비즈니스
• /
• 제10권4호
• /
• pp.130-139
• /
• 2006

This study was conducted to survey and analyze the preference, and acceptance of smart clothing to the consumers with different age. A questionnaire with the objects of 530 consumers from the teens to the forties, in order to utilize the characteristics of consumers as basic materials for the planning of smart clothing, which is reasonably designed to have both of function and fashion, by checking the characteristics of consumers. The results are as follows; 1. The interest degree of fashion was the highest in the 20's and the acceptance degree showed the medial frequency in all age groups. In terms of the analysis result regarding general persons and professionals, professionals showed higher frequency distribution in both interest degree and acceptance degree than general persons. 2. When a comparison for each age, general person, and professional was made, more than the majority of all could not recognize the terms and concept about the smart clothing, but in terms of the favorable impression, more than the majority answered that it interests them. 3. More than the majority of the objects of this survey responded that they have a purchase intention and in terms of the desired purchase price, the price below 500,000 won showed the most frequency. In terms of the reason of wearing the smart clothing, they responded that they can select needed functions, and in terms of an occurring problem, they answered that it is the high cost of economic burdens.