• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제32권5호
• /
• pp.431-436
• /
• 2010

Purpose: It is estimated that the odontogenic keratocyst (OKC) makes up 10% to 12% of all developmen-tal odontogenic cysts. The lesion has been of particular interest because of its specific histopathologic fea-ture, high recurrence rate, and aggressive behavior. Materials and Methods: We investigated 266 OKCs of Korean patients for the sex of patient, the age of the patient, the location of OKC, the recurrence rate related to radiographic impression. Results: The male-to-female ratio was 1.47:1, showing a slight male predilection. Odontogenic keratocysts had a peak of occurrence in the third decade of life. The mandibular angle and ascending ramus area (49.6%) is the most frequent site of OKCs in the jaws. Fourteen cases of unilocular (12%) and 5 cases of multilocular (20%) OKCs recurred. Thirteen cases of smooth (12.9%) and 6 cases of lobulated (14.6%) OKCs recurred. Seventeen cases of OKCs without perforation of cortical bone (12.5%) and 2 cases of OKCs with perforation of cortical bone (33.3%) recurred. Fifteen people of patients with single lesion (12.2%) and 4 people of patients with multiple lesions (66.7%) recurred. Conclusion: In this resul, we consider multiple odontogenic keratocysts can recur more easily. So we have to treat them more carefully and need long-time follow-ups.

• The Journal of Advanced Prosthodontics
• /
• 제2권3호
• /
• pp.102-105
• /
• 2010

PURPOSE. The aims of this study were to suggest a method of fabrication of the record base using a light-polymerized resin by applying the two-phase fabrication method for the improvement of the fit of the record base and to compare the degree of fit according to the separation site. MATERIALS AND METHODS. In the edentulous cast of maxilla, four test groups were considered. In the first, second, third, and fourth test groups (n = 12 in each group) the separation was done at 0, 5, 10, and 15 mm, respectively below the alveolar crest along the palatal plane. For the control group, the record base was made without separating the two sections. The light-body silicone material was injected into the fitting surface of the record base. It was then placed onto the cast and finger pressure was applied to stabilize it in a seated position followed by immediate placement onto the universal test device. Finally, the mass of the impression material was measured after it was removed. ANOVA was performed using the SAS program. For the post-hoc test, the Wilcoxon Rank-Sum test and the Tukey-Kramer HSD test were performed ($\alpha$ = 0.05). RESULTS. The control group and Group 3, 4 showed significant differences. The Group 3 and 4 showed significantly smaller inside gaps than the control group which was not made with the two-phase fabrication method. CONCLUSION. The two-stage polymerized technique can improve the fit of the denture base particularly when the separation was made at 10 to 15 mm from the alveolar crest.

• The Journal of Advanced Prosthodontics
• /
• 제8권3호
• /
• pp.214-218
• /
• 2016

PURPOSE. We assessed the repeatability and reproducibility of abutment teeth dental impressions, digitized with a blue light scanner, by comparing the discrepancies in repeatability and reproducibility values for different types of abutment teeth. MATERIALS AND METHODS. To evaluate repeatability, impressions of the canine, first premolar, and first molar, prepared for ceramic crowns, were repeatedly scanned to acquire 5 sets of 3-dimensional data via stereolithography (STL) files. Point clouds were compared and the error sizes were measured (n=10, per type). To evaluate reproducibility, the impressions were rotated by $10-20^{\circ}$ on the table and scanned. These data were compared to the first STL data and the error sizes were measured (n=5, per type). One-way analysis of variance was used to assess the repeatability and reproducibility of the 3 types of teeth, and Tukey honest significant differences (HSD) multiple comparison test was used for post hoc comparisons (${\alpha}=.05$). RESULTS. The differences with regard to repeatability were 4.5, 2.7, and $3.1{\mu}m$ for the canine, premolar, and molar, indicating the poorest repeatability for the canine (P<.001). For reproducibility, the differences were 6.6, 5.8, and $11.0{\mu}m$ indicating the poorest reproducibility for the molar (P=.007). CONCLUSION. Our results indicated that impressions of individual abutment teeth, digitized with a blue light scanner, had good repeatability and reproducibility.

• International Journal of Costume and Fashion
• /
• 제11권2호
• /
• pp.13-24
• /
• 2011

This study explores the opportunities for new market of traditional Korean costumes, Hanbok, following not only the consumer's needs and wants, but marketing trends of fashion industry. This paper is the exploratory consumer research of fusion Hanbok, it aims at examining how consumers wear fusion Hanbok. Study participants were limited to mothers who wore Korean-fusion Hanbok to their baby's first birthday party once or more. A total of 221 respondents completed online questionnaires. The results of this study are as follows. First, regarding the reasons of wearing fusion Hanbok is a beautiful and traditional dress although traditional Hanbok is uncomfortable and inconvenient. Second, the most satisfactory aspect of fusion Hanbok was found to be its design. Satisfaction with the color, size and length was also high. Third, most female consumers in their 20s and 30s have stronger preferences for and intentions of purchasing fusion Hanbok. Some people criticize that as fusion Hanbok is westernized in its designs and materials, it has lost the classical beauty and impression of traditional Hanbok. However, if no one routinely wears Hanbok, Hanbok will never be popularized or globalized. This study suggest that traditional Hanbok should be improved by developing effective merchandising strategies based on consumer needs for traditional Hanbok such as various product assortment and promotion strategies using traditional Korean beauty. So, traditional Hanbok could be retained and succeeded in the future by improving consumers' dissatisfactions of traditional Hanbok and creating the new market of traditional Hanbok in which fusion Hanbok are produced focused on consumers' needs and market environments.

• 한국문헌정보학회지
• /
• 제38권4호
• /
• pp.149-166
• /
• 2004

이 연구는 한국목록규칙 제4판을 중심으로 일본목록규칙, 영미목록규칙, 국제표준서지기술법의 판사항에 대한 규정을 비교 분석한 것이다. 규칙들간에 미묘한 차이는 있지만 판사항에 대한 특징을 요약하면 아래와 같다. (1) 서지기술에 있어 판과 쇄의 개념을 구별하면서 판의 개념을 매우 포괄적으로 적용하고 있다. 즉, 대체로 내용의 변화가 있거나. 내용의 변화는 없더라도 크기나 활자를 달리하면 새로운 판으로 표시하며, 그렇지 않은 경우는 새로이 발행하더라도 쇄로 표시한다. (2) 판사항의 기술요소는 크게 판표시, 특정 판의 책임표시 부차적 판표시, 그리고 부차적 판의 책임표시와 같이 4개요소로 규정하고 있으며, 대등 판표시는 대개 임의규정으로 되어 있다. (3) 전자자료의 경우, 전자자료의 내용과 기능에 대한 특정 버전을 나타내는 표시는 판으로 표시하는 반면 전자자료의 기능을 수행하는데 필요한 소프트웨어 환경은 판으로 표시하지 않는다. (4) 판에 대한 대등책임표시, 부차적 대등판표시 및 책임표시는 임의규정으로 하거나 판사항에 표시하지 않는다.

• 감성과학
• /
• 제17권4호
• /
• pp.41-50
• /
• 2014

본 연구에서는 제품 이미지에 대한 선호 반응에 있어서 뇌의 반응 패턴의 특징을 파악하고, 피험자가 동일한 대상에 대하여 직관적으로 평가한 선호도 결과와 비교 분석하였다. 첫 번째 실험은 하나씩 별도로 제시된 제품 이미지에 대하여 느끼는 인상을 파악하기 위하여 뇌파 측정을 통한 쾌적도를 산출하였다. 두 번째 실험은 피험자가 모든 제품 이미지를 일시에 비교하며 선호도를 직접 평가하도록 하였다. 첫 번째 실험을 '독립적 인지 반응'이라 하고, 두 번째 실험을 '상대적 인지 반응'이라고 할 때 그 반응의 특성은 다음과 같다. '독립적 인지 반응'에서는 자신의 경험에 의해서 축적된 정보와의 비교에 의하여 절대 가치로서의 감정 상태를 표현하게 되며, '쾌' 또는 '불쾌'라고 하는 감정이 절대적 가치로서 지속된다. '상대적 인지 반응'에서는 이미지를 인지하는 단계에서 비교되는 다른 이미지 정보와의 상대적인 감정 상태를 표현하게 되며, 이때에는 '진정'이나 '흥분'에 해당하는 감정 상태가 상대적 가치로 작용한다.

• 한국환경보건학회지
• /
• 제44권5호
• /
• pp.452-459
• /
• 2018

Objectives: We aimed to examine whether dental waste was being managed adequately at different types of dental institutions in City D in South Korea. Methods: The staff responsible for disinfection at 101 dental offices and clinics (six dentistry departments of general hospitals, 12 dental hospitals, and 83 dental clinics) was interviewed. Results: Solid suction pump waste was handled appropriately at four of the general hospital dentistry departments (66.7%), six dental hospitals (50.0%), and 15 dental clinics (18.1%). Solid spittoon waste was handled appropriately at four general hospital dentistry departments (66.7%), seven dental hospitals (58.3%), and 14 dental clinics (16.9%). Developer and fixer were handled appropriately by a subcontractor at two general hospital dentistry departments (100.0%), five dental hospitals (100.0%), and 24 dental clinics (75.0%). Impression materials were handled appropriately at four general hospital dentistry departments (66.7%), six dental hospitals (50.0%), and 11 dental clinics (13.3%). The plastic covers of intra-oral radiography films were handled appropriately at five general hospital dentistry departments (100.0%), eight dental hospitals (72.7%), and 22 dental clinics (30.1%). Conclusion: South Korea must implement detailed and specialized guidelines for the disposal of solid and general medical waste from dental institutions. Moreover, waste disposal training should be provided annually, and not only once every three years.

• 패션비즈니스
• /
• 제19권1호
• /
• pp.95-105
• /
• 2015

This study investigated the color culture in the Japanese Medieval Age. The Japanese Medieval Age included the Kamakura period (1180-1333) and Muromachi period (1336-1573), and the leading group transitioned from the Kuge families to the Buke families. The taboos about colors from ancient times became nominal, and forbidden colors, such as purple, celadon, and red, became the colors of the samurai, leading to beautiful soldier gears that were unparalleled in history. In the Kamakura period, colors that conveyed a strong impression were created and preferred with the combination of a samurai's reasonable spirit and zen thoughts. The period was also called "the era of hari", and cross dyeing based on basic colors such as suou (red), ai (blue), and kuchinasi (yellow) was popular. In both the Kamakura and Muromachi periods, conspicuous and strong colors were sought for costumes, and embroidery was used with gold leaf, silver leaf, gold threads, silver threads, and background color. The colors of costume preferred by Buke men in the period included green, blue, and brown. In the characteristics of the kosode, the sugan and hitadare were used for men's formal dress, while kosode was used for the grooming of the working class. In these periods, additionally, the working class began to be socially engaged in actively wearing the one-layer kosode, which became popular, and the characteristics of the Japanese Medieval Age, during which functionality and practicality was valued, were also reflected in the dressing.

• Journal of Computational Design and Engineering
• /
• 제3권1호
• /
• pp.37-52
• /
• 2016

To injection mould polymers, designing mould is a key task involving several critical decisions with direct implications to yield quality, productivity and frugality. One prominent decision among them is specifying sprue-bush conduit expansion as it significantly influences overall injection moulding; abstruseness anguish in its design criteria deceives direct determination. Intuitively designers decide it wisely and then exasperate by optimising or manipulating processing parameters. To overwhelm that anomaly this research aims at proposing an ideal design criteria holistically for all polymeric materials also tend as a functional assessment metric towards perfection i.e., criteria to specify sprue conduit size before mould development. Accordingly, a priori analytical criterion was deduced quantitatively as expansion ratio from ubiquitous empirical relationships specifically a.k.a an exclusive expansion angle imperatively configured for injectant properties. Its computational intelligence advantage was leveraged to augment functionality of perfectly injecting into an impression gap, while synchronising both injector capacity and desired moulding features. For comprehensiveness, it was continuously sensitised over infinite scale as an explicit factor dependent on in-situ spatio-temporal injectant state perplexity with discrete slope and altitude for each polymeric character. In which congregant ranges of apparent viscosity and shear thinning index were conceived to characteristically assort most thermoplastics. Thereon results accorded aggressive conduit expansion widening for viscous incrust, while a very aggressive narrowing for shear thinning encrust; among them apparent viscosity had relative dominance. This important rationale would certainly form a priori design basis as well diagnose filling issues causing several defects. Like this the proposed generic design criteria, being simple would immensely benefit mould designers besides serve as an inexpensive preventive cliché to moulders. Its adaption ease to practice manifests a hope of injection moulding extremely alluring polymers. Therefore, we concluded that appreciating injectant's polymeric character to design exclusive sprue bush offers a definite a priori advantage.

• The Journal of Advanced Prosthodontics
• /
• 제8권5호
• /
• pp.396-403
• /
• 2016

PURPOSE. Early loading of implant can be determined by excellent primary stability and characteristic of implant surface. The implant system with recently improved surface can have load application 4-6 weeks after installing in maxilla and mandible. This study evaluated the effect of healing period to the stability of hydrophilic tapered-type implant at maxillary posterior area. MATERIALS AND METHODS. This study included 30 patients treated by hydrophilic tapered-type implants (total 41 implants at maxilla) and classified by two groups depending on healing period. Group 1 (11 patients, 15 implants) was a control group and the healing period was 12 weeks, and Group 2 (19 patients, 26 implants) was test group and the healing period was 6 weeks. Immediately after implant placement, at the first impression taking, implant stability was measured using Osstell Mentor. The patients also took periapical radiographs after restoration delivery, 12 months after restoration and final followup period. The marginal bone loss around the implants was measured using the periapical radiographs. RESULTS. All implants were survived and success rate was 97.56%. The marginal bone loss was less than 1mm after 1 year postoperatively except the one implant. The stabilities of the implants were not correlated with age, healing period until loading, insertion torque (IT), the diameter of fixture and the location of implant. Only the quality of bone in group 2 (6 week) was correlated with the stability of implant. CONCLUSION. Healing period of 6 weeks can make the similar clinical prognosis of implants to that of healing period of 12 weeks if bone quality is carefully considered in case of early loading.