• Journal of Korean Dental Science
• /
• 제7권2호
• /
• pp.80-86
• /
• 2014

Purpose: Current common method of cytotoxicity evaluation for elastomeric impression materials use animal based cell lines, which the clinical relevance has been often questioned. Hence, the purpose of this study was to examine the difference in results with both human based and animal based fibroblast cell line. Materials and Methods: Three types of fibroblast cells were used in this study; conventional mouse fibroblasts of L929, human gingival fibroblasts (HGF-1), and immortalized human oral fibrobalsts (hTERT-hNOF). Test on extract and test by direct contact using different commercially available elastomeric impression materials were carried out according to the international standards. Result: There was significant difference in cell viability between types of fibroblasts cell used, where HGF-1 showed highest cell viability and L929 the lowest. Conclusion: Within the limitation of this study, careful consideration must be given when selecting the cells and interpreting the results for cytotoxicity evaluation of elastomeric impression materials, where use of human based cell lines such as hTERT-hNOF would be appropriate for both ease of cytotoxicity test and clinical relevance.

• 한국의류학회지
• /
• 제23권7호
• /
• pp.921-928
• /
• 1999

The purpose of this study were 1) to find out impression dimensions of the dress wearer with various motifs 2) to evaluate the impression effects of motifs in Korean traditional dress for women. The research method was a quasi-experimental with the between subjects design. The experimental materials developed for the study were a set of stimuli and response scale. The stimuli were consisted of 12 drawings with full factorial design of 3 independent variables : motif sorts (2:flower animal) motif types(2: realistic stylized) motif arrangements(3: all over the traditional to modern) The stimuli consisted of color photographs and color of clothing and motifs was controlled the blue. The response scales were consisted of 30 bi-polar adjectives. The subjects were 333 undergraduate college students of Taejon. The data was analyzed by factor analysis MANOVA and Duncan's multiple range test. Results were as follows: 1. The wearer's impression were consisted of the 3 different dimensions : attractiveness · dignity dimension. Interaction effect among motif sorts motif types and motif arrangements was significant on the same dimension. Interaction effect between motif sorts and motif arrangements was significant on the visibility dimension. 3. The motif arrangements were a significant variable on the attractiveness·dignity and the evaluation dimension. The traditional arrangement and the modern arrangement showed more faborable impression and the all over arrangement showed less favorable impression on the attractiveness·dignity dimension. The all over arrangement showed positive impression on the evaluation dimension and the traditional arrangement and the modern arrangement showed negative impression on the same dimension. There were no significant difference between flower sort and animal sort and also no significant difference between realistic type and stylized type in their impression effects.

• The Journal of Advanced Prosthodontics
• /
• 제10권5호
• /
• pp.335-339
• /
• 2018

PURPOSE. The purpose of the present study was to compare scanning trueness and precision between an abutment impression and a stone model according to dental computer-aided design/computer-aided manufacturing (CAD/CAM) evaluation standards. MATERIALS AND METHODS. To evaluate trueness, the abutment impression and stone model were scanned to obtain the first 3-dimensional (3-D) stereolithography (STL) file. Next, the abutment impression or stone model was removed from the scanner and re-fixed on the table; scanning was then repeated so that 11 files were obtained for each scan type. To evaluate precision, the abutment impression or stone model was scanned to obtain the first 3-D STL file. Without moving it, scanning was performed 10 more times, so that 11 files were obtained for each scan type. By superimposing the first scanned STL file onto the other STL files one by one, 10 color-difference maps and reports were obtained; i.e., 10 experimental scans per type. The independent t-test was used to compare root mean square (RMS) data between the groups (${\alpha}=.05$). RESULTS. The $RMS{\pm}SD$ values of scanning trueness of the abutment impression and stone model were $22.4{\pm}4.4$ and $17.4{\pm}3.5{\mu}m$, respectively (P<.012). The $RMS{\pm}SD$ values of scanning precision of the abutment impression and stone model were $16.4{\pm}2.9$ and $14.6{\pm}1.6{\mu}m$, respectively (P=.108). CONCLUSION. There was a significant difference in scanning trueness between the abutment impression and stone model, as evaluated according to dental CAD/CAM standards. However, all scans showed high trueness and precision.

• 감성과학
• /
• 제15권1호
• /
• pp.73-86
• /
• 2012

Consumers can have impression goals as well as defense goals. Those with impression goals could use social goals or opinions of others in a social context to determine their attitudes, and those with defense goals could maintain their existing attitudes and beliefs. Since people typically approach pleasure and avoid pain, there are two kinds of goal orientations depending on regulatory focus theory. Therefore, marketers could design advertisements for their products on the basis of two types of focus, promotion-focused and prevention-focused advertisements. This study aims to explore how consumers with different consumption goals evaluate an advertised product. The results of this study demonstrate that consumers with impression goals felt much more "right" about the product in a promotion-focused, rather than prevention-focused, advertisement, and those with defense goals, felt much more "right" about the product in a prevention-focused advertisement. Consumers with impression goals evaluated the product in the promotion-focused advertisement more favorably than in the prevention-focused advertisement, and those with defense goals evaluated the product in the prevention-focused advertisement more favorably.

• 대한치과보철학회지
• /
• 제44권4호
• /
• pp.363-373
• /
• 2006

Statement of Problem : The accuracy and dimensional stability of elastomeric impression materials have been the subject of numerous investigation. Few studies have addressed the effect of changes in time on the dimensional stability of impression materials. Purpose: The purpose of this investigation was to evaluate the effects of elastomeric impression materials and storage time on dimensional stability. Materials and methods: A total of 75 impressions were made of epoxy resin dies mimicked prepared 3-unit fixed partial denture. The dies had 1 buccolingual, 1 mesiodistal and 1 occlusogingival lines and interpreped dot. Impression materials investigated included two polyether impression materials and three polyvinylsiloxane impression material. 15 specimens were made of each impression material and poured by type IV stone over times (30 minutes, 24 hours, 72 hours) after mixing; the same examiner measured each specimen 3 times at a magnification of 3.5$\times$. All statistical tests were performed with the level of significance set at .05. Results : The results indicated that significant difference at any measuring point of stone dies of the polyether impression materials and when measurements at 30 minutes, 24 hours, and 72 hours were compared ; the length of measuring point increased significantly as time passed by. However this result is not significant clinically. Analysis also showed significant differences at any measuring point when polyvinylsiloxane and polyether impression materials were compared and significant differences clinically. Conclusion: Under the conditions of this study, the shrinkage rate of the polyvinylsiloxane and polyether impression materials significantly increased as time passed by. The polyether impression materials showed higher shrinkage significantly, while the shrinkage rate of all five materials showed a significant time-dependent increase.

• 한국콘텐츠학회논문지
• /
• 제16권5호
• /
• pp.520-532
• /
• 2016

본 논문의 목적은 충남 아산시의 전통적인 지역을 대상으로 경관과 연관된 소리경관을 정량적으로 분석하여 평가하는 새로운 방법을 제안하는데 있다. 이를 위해 한국인 학생과 일본인 학생의 인상 평가를 각각 수집 및 분석하여 그 결과를 토대로 본 논문의 평가방식의 타당성과 유효성을 입증하였다. 본 연구에서 수행한 연구 절차를 간략히 소개하면 다음과 같다. 우선 아산시의 전통적인 경관을 잘 보여주는 다섯 군데 명소를 선정하고, 비디오카메라를 활용하여 현지의 경관을 형성하고 있는 사물의 상황과 함께 그 곳의 소리를 기록하였다. 기록한 데이터를 한국인 학생과 일본인 학생에게 보여주어 그것에 대한 인상평가를 하게 하였다. 인상평가는 SD법(의미미분법)을 활용하여 실시하였다. 이를 통해 얻어진 정성적 평가 데이터에 수량화이론 및 클러스터분석 방법을 적용하여 각각의 샘플을 분류하는 동시에 인상평가의 등급을 설정하는 정량화를 실시하였다. 샘플을 분류하는 방법과 샘플의 인상평가 등급을 구하는 방법은 서로 다른 접근에 의한 독립적인 방법이다. 따라서 이 두 가지 방법에 의하여 도출된 결과를 비교하여 평가의 타당성을 검토하는 것은 본 연구에서 제안하는 평가 방법의 유효성을 검증하는 한 방법이 될 수 있다. 분석 결과 본 연구에서 제안한 평가 방법이 유효함을 확인할 수 있었고, 아울러 한국인 학생과 일본인 학생은 상당 부분에서 전통적 경관에 대한 인상의 차이를 가지고 있음을 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1886-1888
• /
• 2002

Non-verbal information plays an important role not only in human-to-human communications but also in human computer interaction. In this paper, we examine effects of human-like agent's primitive movements on user's impression, where the human-like agent's primitive movements include eye, mouth, and head. SD (Semantic Differential) method was used for evaluation, and two factors were extracted as a result of the factor analysis. It is found that the first factor influenced the user's impression particularly.

• 지식경영연구
• /
• 제15권4호
• /
• pp.35-56
• /
• 2014

This study examined the effect of perceived risk, an under-explored area in the knowledge sharing literature. We proposed that employee perceptions of risk relate positively with their knowledge sharing behaviors (donating and collecting), and examined the mediating role of impression management strategies in the hypothesized relationships. We also explored the moderating effect of leader-member exchange (LMX) in the relationship between perceived risk and impression management strategies. Valid and reliable self-report and supervisory evaluation measures were collected from a sample of 251 railroad employees in safety-sensitive positions. The results indicate that perceived risk was not significantly associated with knowledge sharing, but rather the risk perception impacts were indirect through impression management strategies such as exemplification and supplication. The study also found that LMX has no moderating effect on the perceived risk and impression management strategies. In discussing these results, we present significant insights in terms of subjective risk judgment as a potential mechanism which can encourage organizational politics.

• 한국의류학회지
• /
• 제22권3호
• /
• pp.341-352
• /
• 1998

The purpose of this study was to investigate the effect of clothing cues (color, color scheme, structure) on impression formation by perceiver personality variable. The subjects were consisted of 77 male and 86 female undergraduate and graduate students. The experimental inventories for this study were a set of stimuli, a response scale, standardized MBTI. The stimuli were eighteen photographs and one extra photograph of a female wearing Korean dress, Chima and Jokori-varied in hue (cool, warm), color scheme (related schemes, con- trasting schemes) of the same silhouette. Results indicate that the most affecting perceiver's personality variables on impression effects were judging-perceiving traits and extraversion -introversion traits. The interaction effects were most frequently appeared between color scheme (clothing cues) and perceiver's personality traits. The impression factors which were most affected by perceiver's personality traits variables were preference· evaluation factor and individuality· attention factor.

• 대한치과보철학회지
• /
• 제34권4호
• /
• pp.850-868
• /
• 1996

The accuracy and dimensional stability of impression materials are one of the most important factors for successful prosthodontic treatment. The purpose of this study was to evaluate the accuracy of several dental elastomeric impression materials used widely and clinically : Impregum-$F^{(R)},\;Permlastic^{(R)},\;Silascon^{(R)},\;Perfect^{(R)},\;Xantopren^{(R)}$. There have been many studies to evaluate the accuracy of impression materials. But it has not been decided yet, which method was most suitable for the evaluation of the accuracy. In this study, two resin teeth, #15 & 25, were prepared with rounded shoulder margin and 90 degree cavosurface angle. For the polysulfide rubber and polyether, the custom tray was made at least 24 hours prior to impression taking. For the silicone rubber materials, putty/wash impression technique was applied in taking impressions. Marginal openings of the castings on the master dies and prepared resin teeth were measured under stereomicroscope. The results were statistically analyzed and compared between tested impression materials. The results were as follows ; 1. In the overall accuracy of impression materials, polyether was the most accurate one, followed by polysulfide, additional silicone and condensation silicone. 2. On the first model pouring, condensation silicone had the largest discrepancies and there was significant difference compared to the other impression materials. 3. Polysulfide had the least discrepancies in the first model pouring, but showed larger discrepancies in the immediate second pouring than the first pouring. 4. On the immediate second pouring, the discrepancy of polyether was shown to be the smallest, while the largest one was additional silicone. 5. Polyether and polysulfide rubber using custom impression trays showed superior accuracy to silicone rubber, putty/wash impression technique.