• International Journal of Aeronautical and Space Sciences
• /
• v.6 no.1
• /
• pp.44-51
• /
• 2005

To provide more accurate and reliable positioning and timing services to Korean nationwide users, the Ministry of Maritime Affairs and Fisheries of Korea is implementing Korean NDGPS (Nationwide DGPS), which is operational partly. And it also has a plan to construct WADGPS (Wide Area Differential GPS) system using sites and equipments of the NDGPS reference stations. For that, Seoul National University GNSS Laboratory is implementing and testing prototypes of WRS (Wide-area Reference Station) and WMS (Wide-area Master Station). Until now, because there are not enough installed WRSs to be used for computing wide area correction information, we cannot test algorithms of WMS with the data processed actually in WRSs. Therefore to evaluate the performance of the algorithms, we made a MATLAB program which can process RINEX (Receiver INdependent Exchange) format data with WADGPS algorithm. Using that program which consists of WRS, WMS and USER modules, we processed the data collected at NDGPS reference stations, which are saved in RINEX format. In WRS module, we eliminate the atmospheric delay error from the pseudorange measurement, smooth the measurement by hatch filter and calculate pseudorange corrections for each satellite. WMS module collects the processed data from each reference stations to generate the wide area correction information including estimated satellite ephemeris errors, ionospheric delays at each grid point, UDRE (User Differential Range Error), GIVE (Grid Ionosphere Vertical Error) and so on. In USER part, we use the measurements of reference stations as those of users and estimate the corrected users' positions and protection levels (HPL, VPL). With the results of estimation, we analyzed the performance of the algorithms. We assured the estimated UDRE /GIVE values and the protection levels bound the corresponding errors effectively. In this research, we can expect the possible performance of WADGPS in Korea, and the developed modules will be useful to implementation and improvement of the algorithms.

• Journal of Broadcast Engineering
• /
• v.18 no.6
• /
• pp.927-934
• /
• 2013

This paper aims to realize a Signal to Noise Ratio Estimator which constitutes a critical index of the broadcasting system in OFDM system with a synchronized type based on ISDB-T system. Of the elements which are comprising OFDM segments of ISDB-T system using the MSE algorithm suitable for ASIC design owing to its low complexity among a diverse SNR estimation methods, SNR estimation method using the broadcasting information data and the SNR estimation method using scattered pilot signal were realized by RTL. These two methods were compared in terms of their performance through simulation test not only in the AWGN channel which is an ideal channel, but also in SFN channel and frequency selective fading channel, which are distorted channels. Complexity of two methods were also compared through RTL realization. As a result of this comparison analysis, it was concluded that the SNR estimation method using scattered pilot signal shows more excellent performance and easiness in realization.

• Journal of Internet Computing and Services
• /
• v.20 no.6
• /
• pp.1-10
• /
• 2019

Object-based image matching algorithms have been widely used in the image processing and computer vision fields. A variety of applications based on image matching algorithms have been recently developed for object recognition, 3D modeling, video tracking, and biomedical informatics. One prominent example of image matching features is the Scale Invariant Feature Transform (SIFT) scheme. However many applications using the SIFT algorithm have implemented based on stand-alone basis, not client-server architecture. In this paper, We initially implemented based on client-server structure by using SIFT algorithms to identify and match objects in biomedical images to provide useful information to the user based on the recently released Mobile platform. The major methodological contribution of this work is leveraging the convenient user interface and ubiquitous Internet connection on Mobile device for interactive delineation, segmentation, representation, matching and retrieval of biomedical images. With these technologies, our paper showcased examples of performing reliable image matching from different views of an object in the applications of semantic image search for biomedical informatics.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.1
• /
• pp.17-23
• /
• 2006

In recent years, RFID has received much attention because of spread usage in industrial applications including factory, material flow, logistics and defense areas. However, there is only CRC-16 for error detection in ISO/IEC 18000-6 Protocols prepared for 860-960 MHz RFID, high error rates are expected in cases of high level of security and noisy envirionment. In this paper, we propose a usage of convolution code as a method for satisfying the high level of security requirement and system error performance.'1'he signal control function is implemented in a microprocessor with RF modulation and the convolutional encoding and Viterbi decoding are implemented in an FPGA chip.'The frame error rates are measured with and without convolution coding under the channel conditions of line-of- sight and non line-of-sight, respectively.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.2
• /
• pp.124-129
• /
• 2007

Recently, the application of the linear machine for industrial field is remarkably increased, especially for the gantry machine, machine tool system and CNC. However a linear meter remains the vibrational characteristic itself therefore, In these application fields, high position control performance is essentially required in both the steady and the transient states. In this paper, the design method for a position control is proposed by using the two-degree-of freedom PID controller. This method has great features for the linear machine drives such as no over-shoot phenomena and single gain tuning strategy. By comparison with conventional PID controller, the improvement of performance of a linear motor control system using two degrees of freedom controller are discussed. Through the simulation results, the usefulness of the proposed algorithm is proved. With the simulation results, it was made clear that the introduction of two degrees of freedom controller designed by the proposed method not only improves the over shoot and starting characteristic of response but also removes the undesirable characteristic variation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8C
• /
• pp.803-810
• /
• 2003

This paper addresses an image processing technique for the human papillomavirus (HPV) DNA chip to discriminate whether the probes are hybridized with the target DNA. HPV DNA chip is designed to determine HPV gene-types by using DNA probes for 22 HPV types. In addition to the probes, the HPV DNA chip has markers that always react with the sample DNA. The positions of probe-dots in the final scanned image are fixed relative to the marker- dot locations with a small variation attributable to the accuracy of the dotter and the scanner. The probes are quadruplicated to enhance diagnostic fidelity. frier knowledge including the marker relative distance and the replication information of probes is integrated into the template matching technique with normalized covariance measure. It was demonstrated that the employment of both of the prior knowledges can be accomplished by simply averaging the template matching measures over the positions of the markers and probes. The resulting proposed scheme yields stable marker locating and probe classification.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2C
• /
• pp.291-297
• /
• 2004

In this paper, a new structure for the AEC(Acoustic Echo Canceller) is proposed in which echo signal components that can be created in mobile communications is effectively eliminated. Block Data Flow Architecture is a parallel architecture that achieves high performance, high efficiency, high throughput, and almost linear speed up. The proposed architecture employs AEC and is implemented using the TMS320C6711 for real-time applications. The proposed AEC shows improved performance by eliminating echoes at 55ms delay path. Since the proposed AEC can also be implemented in Firmware, it is believed to effectively work on various types of echoes if it is applied on CDMA mobile devices. The TMS320C6711 shows much better performance comparing to previous DSPs. For experimental verifications, filtering operation using adaptive algorithm is performed on TMS320C6711 board and error signals resulted from computations are monitored on PC, and then the performance of the implemented AEC is verified through ERLE computation. According the results of simulation, good characteristic of 100dB are shown after 500 sampling data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1387-1394
• /
• 2015

Along with the development of network transmission technology, the IPTV market is growing in fast pace. Additionally the UHD resolution broadcasting system along with user experience (UX) that provides better service to user has attracted attention recently since there are not enough research has been done with differentiated the UX that can enhance the UX yet. Therefore we proposed a low complexity syntax level image stitching implementation technique that run with multi-view services, which makes possibility to view multiple channel or video contents on the screen at the same time. Simulation results have demonstrated the liability and effectiveness of the proposed algorithm by showing that capability of generating more than 80 frames per second by stitching four Full-HD size videos into UHD frame.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11C
• /
• pp.1029-1039
• /
• 2009

In this paper, the existing disparity aquisition algorithms were analyzed, on the bases of which a disparity generation technique that is superior in accuracy to the generation time was proposed. Basically it uses a pixel-by-pixel motion estimation technique. It has a merit of possibility of a high-speed operation. But the motion estimation technique has a disadvantage of lower accuracy because it depends on the similarity of the matching window regardless of the distribution characteristics of the texture in an image. Therefore, an enhanced technique to increase the accuracy of the disparity is required. This paper introduced a variable-sized window matching technique for this requirement. By the proposed technique, high accuracies could be obtained at the homogeneous regions and the object edges. A hardware to generate disparity image was designed, which was optimized to the processing speed so that a high throughput is possible. The hardware was designed by Verilog-HDL and synthesized using Hynix $0.35{\mu}m$ CMOS cell library. The designed hardware was operated stably at 120MHz using Cadence NC-VerilogTM and could process 15 frames per second at this clock frequency.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.10
• /
• pp.435-442
• /
• 2006

One of the most important topics about the safety of electrical and electronic system is the reliability of the wiring system. The Time-Frequency Domain Reflectometry(TFDR) is a state-of-the-art system for detecting and estimating of the fault on a wiring. In this paper, We've considered the load resistance measurement on a coaxial cable using TFDR in a way of expanded application. The TFDR system was built using commercial Pci extensions for Instrumentation(PXI) and LabVIEW. The proposed real time TFDR system consisted of the reference signal design, signal generation, signal acquisition, algorithm execution and results display part. To implement real time system, all of the parts were programmed by the LabVIEW which is one of the graphical programming languages. Using the application software implemented by the LabVIEW, we were able to design a proper reference signal which is suitable for target cable and control not only the arbitrary waveform generator in the signal generation part but alto the digital storage oscilloscope in the signal acquisition part. By using the TFDR real time system with the terminal resistor on the target cable, we carried out load impedance measurement experiments. The experimental results showed that the proposed system are able not only to detect the location of impedance discontinuity on the cable but also to estimate the load resistance with high accuracy.