• Journal of Power Electronics
• /
• v.11 no.2
• /
• pp.218-227
• /
• 2011

The subject of variable step size maximum power point tracking (MPPT) algorithms has been addressed in the literature. However, most of the addressed algorithms tune the variable step size according to two variables: the photovoltaic (PV) array voltage ($V_{PV}$) and the PV array current ($I_{PV}$). Therefore, both the PV array current and voltage have to be measured. Recently, maximum power point trackers that arc based on a single variable ($I_{PV}$ or $V_{PV}$) have received a great deal of attention due to their simplicity and ease of implementation, when compared to other tracking techniques. In this paper, two methods have been proposed to design a variable step size MPPT algorithm using only a single current sensor for stand-alone battery storage PV systems. These methods utilize only the relationship between the PV array measured current and the converter duty cycle (D) to automatically adapt the step change in the duty cycle to reach the maximum power point (MPP) of the PV array. Detailed analyses and flowcharts of the proposed methods are included. Moreover, a comparison has been made between the proposed methods to investigate their performance in the transient and steady states. Finally, experimental results with field programmable gate arrays (FPGAs) are presented to verify the performance of the proposed methods.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.5
• /
• pp.38-44
• /
• 2002

This paper describes the development of a new voltage recorder for the voltage management of power distribution lines. The voltage characteristics and measurement problems for the power distribution lines are analyzed and the functions required for the recorder are discussed. Applying a dual-slope A/D converter with low noise characteristics the voltage measurement algorithm, design and implementation for the recorder are discussed. Finally, the voltage variations of long-duration over-voltages or under-voltages, and short-duration temporary interruption based on IEEE 1159 are analyzed. It is verified with the experiment.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04a
• /
• pp.394-396
• /
• 2002

'분산 모의훈련 전장환경'은 실제 또는 가상전쟁, 전투 등 군사 상황을 묘사하기 위해, 둘 또는 그 이상의 적대 세력간에 발생하는 군사적 상황을 게임규칙, 자료 및 절차를 사용하여 모의하는 군사작전 게임(war game)을 의미한다. 이는 컴퓨터와 네트워크를 이용한 '합성 가상 전장환경'에서 구현되는데, 특성상 다수의 게이머와 게이머, 게이머와 객체, 객체들간에 네트워크를 통한 빈번한 메시지 송.수신을 통한 정보를 교환하고 실시간으로 상호동작 한다. 즉, '합성 가상 전장환경'의 구현을 위해서는 신뢰성과 실시간성을 보장하는 다자간 통신의 보장이 핵심을 이룬다. 그러나, 일반 인터넷상의 브로드캐스팅 기술을 적용할 경우, 가상전장환경에서 폭주하는 통신량을 실시간으로 처리하기엔 어려운 문제점이 있다. 따라서 '합성 가상전장가상환경'의 보다 효과적인 구현을 위해서는 고신뢰 실시간 다중 그룹통신 기술의 개발이 요구된다. 본 논문은 그룹통신 개념에 기반하여 가상 합성 전장 환경에 적용할 수 있는 효율적인 전송 서비스를 위한 네 가지 전송 알고리즘을 제시하며, API 설계를 통해 서비스를 구현한다.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.56 no.2
• /
• pp.74-82
• /
• 2007

Interior permanent magnet synchronous motor(IPMSM) has become a popular choice in electric vehicle applications, due to their excellent power to weight ratio. This paper proposes efficiency optimization control of IPMSM drive using adaptive fuzzy learning control fuzzy neural network (AFLC-FNN) controller. In order to maximize the efficiency in such applications, this paper proposes the optimal control method of the armature current. The controllable electrical loss which consists of the copper loss and the iron loss can be minimized by the optimal control of the armature current. The minimization of loss is possible to realize efficiency optimization control for the proposed IPMSM. The optimal current can be decided according to the operating speed and the load conditions. This paper considers the design and implementation of novel technique of high performance speed control for IPMSM using AFLC-FNN controller. Also, this paper proposes speed control of IPMSM using AFLC-FNN and estimation of speed using ANN controller. The back propagation neural network technique is used to provide a real time adaptive estimation of the motor speed. The proposed control algorithm is applied to IPMSM drive system controlled AFLC-FNN controller, the operating characteristics controlled by efficiency optimization control are examined in detail.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.101-104
• /
• 2004

음성속도변환(TSM : Time Scaling Modification) 알고리즘은 시간축에서 음성 신호의 속도를 변환할 수 있는 방식이다. 이러한, 방법으로는 OLA(Overlap Add), SOLA (Synchronized Overlap Add) 알고리즘 등이 연구 되어 왔다. 2 가지 방식 중에도 동기화를 시켜 overlap 을 시키는 SOLA 알고리즘이 OLA 방법에 비해 음질이 우수하다. 본 논문에서는 TMS320C5416 DSP 에 계산량이 감소된 SOLA 알고리즘을 실시간 구현하였다. 기존의 SOLA 알고리즘에서 동기화를 위해 사용하고 있는 cross-correlation 함수는 곱셈연산에서 발생하는 bit 의 dynamic range 가 커서 나눗셈 연산에서도 과도한 연산량을 필요로 한다. 따라서 이러한 계산량의 감소를 위해 기존의 cross-correlation 함수가 대신 더하기와 빼기의 연산으로 수행되는 NAMDF 함수를 사용하여 계산량을 줄였다. 제안한 방법을 SOLA 알고리즘에 적용하여 성능 평가를 실시하였다. TMS320C5416 DSP 에 실시간으로 실험한 결과 NAMDF 함수를 사용하였을 경우 음질의 저하가 거의 없었으며, 계산량을 기존의 cross-correlation 방식에 비해 6.22MIPS 가까이 감소시킬 수 있었다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.8
• /
• pp.680-688
• /
• 2001

In this paper, the fuzzy control with variable input gain is applied to maintain the consistent tension in the process of taking up and releasing texture. In the process of discharging web on one side rolling it on another, the take-up drum gets smaller on the release drum side as it gets bigger on the rolling side, thus it is necessary to change the balance of velocity between the sides. In order to solve the problem a tension controller is necessary. The PI control method has been employed to maintain the consistent tension, but the PI control method produces a problem which requires an experienced worker with the traits of the machine, in order to perform the fine adjustments according to the environment of the process. For solving the above problem, we apply fuzzy control to the tension system, in order to produce a uniform roll. For the performance test, the fuzzy controller does not need to revise the parameters. Therefore the fuzzy controller exhibits an excellent additivity for the tension system where the system is changed with time.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.4
• /
• pp.455-468
• /
• 2014

This paper presents seamless hand off implementation suggesting algorithm and Measuring /testing at the tunnel environment in order to derive the ideal value of wireless data transmission in RF-CBTC train control system modeled by Shinbundang Operation System. In addition, it proposes the ideal value(-57dB) for reducing the re-transmission or frequency interference rate and demonstrates frequency optimization which enables highly reliable data communication in Train control system using wireless communications. Based on these result, Shinbundang phase 2 plan to apply to this system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.7
• /
• pp.892-897
• /
• 2018

Due to population aging, an increase in the number of patients with chronic illnesses, and an increase in the number of single-person households, monitoring of health status in everyday life without the need for a hospital has become very important. For this reason, researches on various health care devices have been attempted, among which wearable devices are attracting much attention. In this paper, we propose a new ring-type wearable device for next generation healthcare. On the inner side of the ring, a metal electrodes for GSR measurement and an optical sensor for measurement of pulse wave signals of two wavelengths of red and near-infrared light were mounted. In addition, it was equipped with an acceleration sensor, and information about the degree of motion could be obtained. In this paper, it is shown that a health monitoring device can be implemented in the form of a ring, and the measured signals can be used to calculate heart rate, oxygen saturation, sleep time and sleep efficiency. Through the advanced algorithm, it is expected that we can extract various health information, especially sleep related health information by using the ring device, and it is also expected that it can contribute to the implementation of wearable healthcare effectively.

• Journal of Korea Multimedia Society
• /
• v.20 no.3
• /
• pp.581-592
• /
• 2017

Geographic Information System (GIS) is a method of expressing objects in a space. Currently, many research and developments are being conducted to implement 3D GIS. In previous studies, 3D GIS applications have been developed using Unity 3D, which is a 3D engine with good development accessibility. However, it requires manual work to enter various formats of GIS data, making it difficult to immediately reflect GIS data that change frequently. To improve this problem, this study developed a method for automatically reading and outputting various GIS data from the existing Unity 3D application. The improved application could read Satellite Images, Aerial Photographs, Digital Elevation Models (DEM) and Shapefiles with no transformation through other commercial programs, and they could be implemented as 3D objects. This study automated the GIS data conversion which had been manually performed and as a result, the manpower, time, and resources required for 3D GIS implementation can be saved.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.6
• /
• pp.39-46
• /
• 2003

In this papers, We studied system requirement specification, hardware design and implementation, protective algorithm and software design method to implement digital protective relay which has high trust and high function of protection as well as control and metering for power transformers. Protective relay for transformer is implemented on real time using DSP, which is the specific processor for digital signal processing, as a result, it is completed by the wide improvement of arithmetic capability of protective relay. Reliability is proved testing operating value and operating time, reset value and reset time of an relaying element using protective relay tester made in NF Corporation of Japan.