• 대한기계학회논문집A
• /
• 제20권5호
• /
• pp.1458-1467
• /
• 1996

A direct differentiationmethod is presented for the shape design sensitivity analysis of axisymmeetric elastic solids. Based on the exisymmetric boundary integralequaiton formulation, a new boundary ntegral equatio for sensitivity analysis is derived by taking meterial derivative to the same integral identity that was used in the adjoint variable melthod. Numerical implementation is performed to show the applicaiton of the theoretical formulation. For a simple example with analytic solution, the sensitivities by present method are compared with analytic sensitivities. As an application to the shape optimization, an optimal shape of a gas turbine disc toinimize the weight under stress constraints is found by incorporating the sensitivity analysis algorithm in an optimizatio program.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.295-302
• /
• 2007

The objective of this paper is to evaluate the proposed design by the Value Engineering (VE) analysis for the gravel ballast and the concrete ballast track structures. However, reliabilities about the VE analysis results based on Life-Cycle Cost(LCC) has not been fully benefited from VE implementation due to disregard of basic principles and lack of systematic performance measurement systems. In this paper, the VE analysis using the Delphi survey of professional group is proposed to decide reasonable determinants for investment and alternative design in construction project of railway tracks. Moreover, the efficiency of VE analysis is invested by an application of the developed methodology to track structures.

• 대한기계학회논문집A
• /
• 제21권6호
• /
• pp.933-941
• /
• 1997

In the analysis of thin elastic structures such as plate and shell-like structures, classical lower-order theories like Kirchhoff and Reissner-Mindin theories are insufficient to describe the behavior of such structures in the region where the state of stresses is complex. On the other hand, the fully three dimensional theory of linear elasticity can provide desired analysis accuracy, but requires expensive computational implementation compared to the classical theories. This paper is concerned with the development of hierarchical models for elastic structures which can be used for hierarchical modeling for the analysis of such structures. Derivation and limit model analysis (when the thickness of structures tends to zero) of hierarchical models are presented together with a introduction of modeling error estimation. Also, numerical results supporting theoretical results are given.

• 한국컴퓨터정보학회논문지
• /
• 제21권11호
• /
• pp.79-83
• /
• 2016

In this paper, we define four levels of analysis, design, implementation, and testing of the configuration of the development phase by S/W development life cycle. In particular, it dealt with the stage of the analysis phase to prepare an information system developed intensively. Details of the derivation of the information security requirements, it can be seen that comes from the perspective of confidentiality, integrity, availability and accountability, etc. It dealt with from the first manifestations of the projects planning to final planning to establish information security in activities of the Information Security requirements. As an example exhibited by assessing the information security analysis phase activities of S corporations, it can be seen that the improved sales rise in information security activities.

• 조명전기설비학회논문지
• /
• 제27권3호
• /
• pp.43-49
• /
• 2013

Recently harmonics flowing into power system is increasing as the usage of semiconductor equipments and switching mode power equipments are increasing. Harmonics cause problems such as heat increasing and reduction in capacity of transformers, especially the harmonics flowing into a distribution transformer can lead to the lifetime reduction of transformer. In this paper, we are about to develop a device that can monitor harmonics in real-time as it is affixed to a distribution transformer. Unlike the existing expensive harmonic analysis device, a new harmonic analysis algorithm is proposed in order to implement low-cost equipment. The real-time harmonic analysis algorithm proposed in this paper allows implementation on low performance microcontrollers, thus it can monitor the harmonic in real-time as it is individually affixed to the transformer. Therefore, it would improve the reliability of the transformer and stable power system operation would be possible as it can prevent the transformer accidents in advance.

• Communications for Statistical Applications and Methods
• /
• 제25권6호
• /
• pp.673-685
• /
• 2018

Procrustes analysis is a useful technique useful to measure, compare shape differences and estimate a mean shape for objects; however it is based on a least squares criterion and is affected by some outliers. Therefore, we propose two generalized Procrustes analysis methods based on M-estimation and least median of squares estimation that are resistant to object outliers. In addition, two algorithms are given for practical implementation. A simulation study and some examples are used to examine and compared the performances of the algorithms with the least square method. Moreover since these resistant GPA methods are available for higher dimensions, we need some methods to visualize the objects and mean shape effectively. Also since we have concentrated on resistant fitting methods without considering shape distributions, we wish to shape analysis not be sensitive to particular model.

• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.732-740
• /
• 2022

A piping system stress analysis need to be re-performed for structural integrity assessment after reinforcement of a pipe with significant wall thinning. For efficient stress analysis, a one-dimensional beam element for the wall-thinned pipe with reinforcement needs to be developed. To develop the beam element, this work presents analytical equations for elastic stiffness of the wall-thinned pipe with reinforcement are analytically derived for axial tension, bending and torsion. Comparison with finite element (FE) analysis results using detailed three-dimensional solid models for wall-thinned pipe with reinforcement shows good agreement. Implementation of the proposed solutions into commercial FE programs is explained.

• 한국정밀공학회지
• /
• 제11권5호
• /
• pp.171-179
• /
• 1994

For successful implementation of robotic painting system, a structured design and analysis procedure is necessary. In designing robotic system, both functional and economical feasibility should be investigated. As the robotization is complicated task involving implemen- tation details (such as robot selection, accessory design, and spatial layout) together with operation details, the computer aided design and analysis method should be sought. However, conventional robotic design systems and off-line programming systems cannot accommodate these inquiries in a unified fashion. In this research, we develop an interactive design support system for robotization of a cycle painting line. With the developed system called SPRPL (Simulation Package for Robotic Painting Line) users can design the painting objects (via FRAME module), select robot model (ROBOT), design the part hanger (FEEDER), and arrange the workcell. After motion programming (MOTION), the design is evaluated in terms of: a) workpace analysis, b) coating thickness analysis, and c) cycle time (ANALYSIS).

• 한국정보기술학회 영문논문지
• /
• 제9권2호
• /
• pp.65-74
• /
• 2019

In this paper, we describe a new swing analysis system. We design this system to provide various information about golf swings and to help to correct wrong swings. We visualize three-dimensional skeletal information obtained from Kinect through various views. Golfers can see their swing behavior through these views. This system can calculate the similarity between the two trajectories obtained from Kinect to determine the similarity of swing trajectories of different golfers. Input trajectories are resampled to have equal spacing and are performed scaling and translation for accurate trajectory comparison. We have verified the usefulness of the proposed system through various analyzes.

• International Journal of Computer Science & Network Security
• /
• 제24권4호
• /
• pp.44-50
• /
• 2024

This paper offers an overview of matrix formation and calculation techniques within the framework of General Linear Models (GLMs). It takes a sequential approach, beginning with a detailed exploration of matrix formation and calculation methods in regression analysis and univariate analysis of variance (ANOVA). Subsequently, it extends the discussion to cover multivariate analysis of variance (MANOVA). The primary objective of this study was to provide a clear and accessible explanation of the underlying matrices that play a crucial role in GLMs. Through linking, essentially different statistical methods, by fundamental principles and algebraic foundations that underpin the GLM estimation. Insights presented here aim to assist researchers, statisticians, and data analysts in enhancing their understanding of GLMs and their practical implementation in diverse research domains. This paper contributes to a better comprehension of the matrix-based techniques that can be extended to GLMs.