• 대한치과기공학회지
• /
• 제41권4호
• /
• pp.305-317
• /
• 2019

Purpose: The purpose of this study is to provide basic data for the improvement of dental care service for patient care. Methods: The survey period was from December 10, 2018 to June 10, 2019. The subjects were 180 patients who were treated with dental implant in 20 dental hospitals and clinics in Daejeon and Gyeonggi province. A total of 145 questionnaires were analyzed except for 35 copies which were unreliable or difficult to analyze. Results: The most important care method for prolonging the life time of dental implant prosthesis was the highest rate of correct brushing (39.4%), and a majority in the subjects used oral hygiene products (91.0%). With regard to discomfort after dental implant prosthesis, food particles between the teeth showed the highest response (49.7%), and discomfort with gum infections and bleeding and reduced mastication increased significantly with age (p<0.05), whereas feeling of irritation decreased significantly with age (p<0.05). Conclusion: This study is meaningful in that it approached the perception and discomfort of prosthesis from the patients' point of view. It needs to establish the basic data to improve dental treatment service for patient care.

• 대한치과의사협회지
• /
• 제54권3호
• /
• pp.198-205
• /
• 2016

The purpose of this paper was to investigate the significance of splinted and non-splinted implant-supported restorations with an internal connection for multiple consecutively missing teeth. Upon examination of the effects of fixture-abutment connection, the distribution of occlusal load was favorable in splinted implant-prosthesis with an external connection, but effect of strain distribution was not significant in splinted implant-prosthesis with an internal connection. In splinted implant-prostheses for short implants, strain distribution was not affected by the method of retention. For cement-retained prostheses, the effect of strain distribution due to splinting was not significant. In clinical studies, non-splinted prostheses with an internal connection for multiple consecutively missing teeth showed high survival rate, mild marginal bone loss, and stable periodontal condition. However, failure to achieve optimal proximal contact between single-unit prostheses may lead to food impaction, and veneer fracture may be inevitable when the framework provides inadequate support in the proximal region. In conclusion, splinted implant-prosthesis is not an indication in all cases, and clinical consideration of its use should be based on the patient's oral condition, such as location and number of implants, formation of proximal contact, canine guidance, existence of parafunctional habit, and oral hygiene, when multiple consecutively missing teeth are replaced by internal connection type implant.

• 대한치과보철학회지
• /
• 제59권1호
• /
• pp.126-133
• /
• 2021

여러 연구에서 임플란트 지지 보철물의 수직 침하에 대해 보고되고 있지만, 구강내 임플란트 지지보철물의 기능 시 수직침하 양상에 대해서는 알려진 바 없다. 본 증례에서는 2명의 환자에서 구치부 단일 치아 임플란트 지지 보철물의 3차원적인 변화를 평가하였다. 내부연결형 임플란트를 식립하였으며 통상적인 방법으로 Screw-Cement Retained Prosthesis(SCRP) 형태의 보철물을 제작해 장착하였다. 구강스캐너(Cerec Omnicam, Dentsply Sirona, USA)를 이용해 보철물 장착 시, 장착 1주, 1개월, 1년 후 구강 스캔을 시행하였으며 디지털 분석 프로그램(Geomagic Control X, 3D systems, USA)을 이용해 기간에 따른 위치 변화를 3차원적으로 평가하였다. 인접 치아를 기준으로 보철물 장착 후 임상적인 위치 변화가 나타났으며 변화량은 시간이 지남에 따라 증가하였다.

• 대한치과보철학회지
• /
• 제56권1호
• /
• pp.88-94
• /
• 2018

최근 치과치료의 영역에서 디지털 임플란트 시스템은 그 영역을 넓혀 나가고 있다. 디지털 장비들의 기술적 발전에 힘입어 한계점들이 하나 둘씩 극복되었다. 초기 단일치아 수복 정도에나 사용되었던 디지털 임플란트 시스템은 임플란트 수술에서부터 보철물 제작까지 무치악의 영역에서도 사용되고 있다. 본 증례에서는 50세의 하악 무치악 환자가 임플란트를 이용한 교합 재건을 원하였다. 하악의 임플란트 수복을 위해서 "All-on-4" 개념의 디지털 임플란트 시스템 사용을 계획하였고, 무절개 수술을 위한 가이드 장치를 제작하여 수술을 시행하였다. 수술 후, 전악 보철을 디지털 장비를 이용하여 제작하였다. 전체 치료 과정에서 기존의 아날로그 방식(인상채득, 납형 제작, 주조 등)을 가능한 배제하고 디지털 시스템을 이용하여 기공과정 및 임상과정을 최소화하기로 계획하였고 만족할만한 결과를 얻었기에 보고하는 바이다.

• 대한치과보철학회지
• /
• 제33권1호
• /
• pp.98-129
• /
• 1995

The purpose of this study was to evaluate how mandibular implant-supported fixed complete prosthesis, implant and mandible responded mechanically, according to curvature of arch, number and location of fixture, and amounts of load. The shape of mandibular arch was tapered or square form and, 4 or 6 fixtures were implanted in each arch model. A vertical load of 10kg was applied at the center of prosthesis and a vertical load of 20kg was applied at the location of the 10mm or 20mm cantilever posterior to the most distal implant. Three-dimensional finite element analysis was performed for stress distribution and deflection using commercial software(ABAQUS program) for Sun-SPARC Workstation. The results were as follows : 1. The case square arch form was more stable to compare with that of tapered arch form in respect of stress distribution and displacement under vertical load on the center of prosthesis. 2. 6-implants cases were more stable than 4-implants cases for decreasing bending torque under vertical load on the center of prosthesis. 3. Under vertical load on cantilever extension, the case of 10mm long cantilever was more stable than that of 20mm long cantilever in respect of stress distribution and displacement. 4. Under vertical load on cantilever extension, 6-implants cases had a tendency to reduce displacement and to increase the reaction force of supporting point due to increasing of the bending stiffness of the prosthesis than 4-implant case. 5. When the ends of 10mm or 20mm long cantilever were loaded, the most distal implant was under compressive stress but the second most distal implant was under the highest tensile stress and the remaining implants were under varying tensile stress. 6. Because 6-implants cases had smaller displacement than 4-implants cases, 6-implants cases were more favorable in respect of prevention of screw loosening under repeated loadings.

• 대한치과보철학회지
• /
• 제62권1호
• /
• pp.38-46
• /
• 2024

편악 무치악 환자에서 완전 고정성 임플란트 보철 치료를 위해 다수의 임플란트를 식립할 때에는 악궁의 해부학적 구조, 대합치의 상태, 교합 평면 등을 고려한 최종 보철물 형태를 미리 결정해야 한다. 이 때 임시 보철물의 형태 및 교합 정보는 최종 보철물의 디자인에 유용하게 활용될 수 있다. 본 증례에서는 구강 스캐닝 디지털 워크플로우를 통해 무치악 스캔 데이터와 임시 보철물의 스캔 데이터를 중첩하였으며, 이를 통해 임시 보철물의 정보를 최종 보철물의 디자인에 반영하였다. 또한 구강 스캔을 통해 임시 의치 정보를 획득하여 임플란트의 위치와 각도를 계획하고, 수술 가이드를 사용하여 사전에 계획한 3차원적 위치에 임플란트를 식립하였다. 본 증례에서는 이와 같이 디지털 기술을 활용하여 심미적, 기능적으로 만족할 만한 임상적 결과를 얻었기에 이를 보고하는 바이다.

• 대한심미치과학회지
• /
• 제23권2호
• /
• pp.70-76
• /
• 2014

After extraction of tooth, alveolar ridge resorption is inevitable in most cases. Clinicians confront with horizontal and vertical resorption of alveolar bone. Without massive amount of bone and soft tissue graft, dental implant will be placed apically to gain stability. In those cases, not only white esthetic part, but also pink esthetic part should be restored with pink porcelain. The margin of prosthesis should be located apically to reproduce natural look with adjacent teeth. However, when the margin is located apically, it is always hard to remove remaining cement, thus complications may arise. In this report, a novel design of implant prosthesis is introduced to solve those issues. The novel design is consisted of zirconia framework with pink porcelain and separate crowns on top of the framework. It eliminates the possibility of cement remnants by bringing the crown margin coronally. Pink esthetic part is incorporated in abutment part instead of crown part and the screw hole is covered with separate crowns.

• The Journal of Advanced Prosthodontics
• /
• 제3권4호
• /
• pp.204-215
• /
• 2011

PURPOSE. The aim of this retrospective study is to analyze the relationship between local factors and survival rate of dental implant which had been installed and restored in Seoul Veterans Hospital dental center for past 10 years. And when the relationship is found out, it could be helpful to predict the prognosis of dental implants. MATERIALS AND METHODS. A retrospective study of patients receiving root-shaped screw-type dental implants placed from January 2000 to December 2009 was conducted. 6385 implants were placed in 3755 patients. The following data were collected from the dental records and radiographs: patient's age, gender, implant type and surface, length, diameter, location of implant placement, bone quality, prosthesis type. The correlations between these data and survival rate were analyzed. Statistical analysis was performed with the use of Kaplan-Meier analysis, Chi-square test and odds ratio. RESULTS. In all, 6385 implants were placed in 3755 patients (3120 male, 635 female; mean age $65{\pm}10.58$ years). 108 implants failed and the cumulative survival rate was 96.33%. There were significant differences in age, implant type and surface, length, location and prosthesis type (P<.05). No significant differences were found in relation to the following factors: gender, diameter and bone quality (P>.05). CONCLUSION. Related factors such as age, implant type, length, location and prosthesis type had a significant effect on the implant survival.

• 대한치과보철학회지
• /
• 제58권3호
• /
• pp.244-250
• /
• 2020

상악 전치부에서 임플란트의 순구개측 식립 위치는 보철물의 심미성을 결정하는 중요한 요소이다. 그러나 상악 전치부의 얇은 순측골은 발치 후에 상당한 양이 흡수되어, 임플란트가 이상적 식립 위치보다 구개측에 식립될 수 있다. 본 상악 중절치 상실 증례들에서 다소 구개측에 식립된 임플란트의 보철 수복을 위하여 UCLA 지대주를 이용하였다. 또한 타과와 협진으로 발치 후 흡수된 치조골 외형과 치은의 형태 회복을 위하여 골유도재생술을 시행하였고, 인접전치를 재배열 하였다. 충분한 임시 보철물 수복 기간으로 치은 형태의 심미적 회복을 확인한 뒤에 최종 보철 시행하였으며, 임플란트 보철을 통한 치아 상실 부위의 기능, 심미 회복이 만족할 만한 결과를 보였다.

• 대한치과기공학회지
• /
• 제29권2호
• /
• pp.105-117
• /
• 2007

As a dental technician, the aim of the present study on maxillofacial prosthesis was to research its relation with dental technology and further development aspects by looking into its history, kinds, production materials and process. Dental technicians are to expect a great potential to work as maxillofacial prosthetist if having an interest in education of maxillofacial prosthesis field, and developing and operating the education process by expanding the range of dental technology. This article is to present overall history of maxillofacial prosthesis and some background information on the materials which have been used from the past. The maxillofacial field plays essential functions of mastication and speech, as well as performs appearance, which evokes good or bad feelings as an instant and instinctive response. The use of maxillofacial prostheses is not merely the replacement of a missing part of the face, resulted from injuries, but a rehabilitation process to help individuals come back to society. Rehabilitation includes both patient's physical and psychological recovery, such as self-esteem and selfconfidence. There has been a rapid development in application potentials of maxillofacial prosthesis technology which include implant, which can penetrate skin, and new materials. In order to produce maxillofacial prosthesis, general procedures of maxillofacial laboratory work should be understood first. Maxillofacial prosthesis and the dental prosthesis have many similarities in its academic perspective and originality. Maxillofacial prosthesis should be added into the curriculum for dental technology to achieve co-enhancement of the two fields.