• Imaging Science in Dentistry
• /
• 제46권2호
• /
• pp.109-115
• /
• 2016

Purpose: Sinus elevation procedures have become a routine and reliable way to gain bone volume in the edentulous maxilla for dental implant placement. Presence of bony septations and pathology in the maxillary sinus often cause complications leading to graft or implant failure or both. The aim of this study was to retrospectively evaluate the prevalence of pathology, direction of the septa, and sinus width measured at 2 mm, 5 mm, and 10 mm from the sinus floor in maxillary sinuses using cone-beam computed tomography (CBCT). Materials and Methods: Seventy-two sinuses from 36 random preoperative CBCT scans referred for implant therapy were retrospectively evaluated for the number, prevalence, and direction of bony septations and presence of pathology. Width of the sinus was also measured at 2 mm, 5 mm, and 10 mm from the sinus floor to account for the amount of bone available for implant placement. Results: Maxillary sinus septa were found in 59.7%. Presence of a single septum was noted in 20 sinuses (27.7%), followed by two septa in 17 sinuses. The most common direction of the septum was the transverse direction. Retention pseudocyst and mucosal thickening were the most commonly seen abnormality/pathology. Conclusion: Based on the high prevalence of septa and sinus pathology in this sample, a preoperative CBCT scan might be helpful in minimizing complications during sinus augmentation procedures for dental implant therapy.

• 구강회복응용과학지
• /
• 제32권4호
• /
• pp.322-329
• /
• 2016

상악골 절제술을 받은 환자의 구개폐쇄장치 보철 수복은 구강과 비강 및 상악동의 개통으로 인한 저작기능, 연하, 발음 및 심미성의 상실을 회복하는 것을 목적으로 하는 치료이다. 상악골 절제술 환자에서 구개폐쇄장치 설계 시 측방력으로 인해 야기되는 응력은 적절한 교합 양식의 선택, 조기 교합접촉의 제거, 광범위한 지지영역의 활용으로 최소화될 수 있다. 또한 기능 시 응력이 지대치로 전달되는 것을 줄여주는 유지장치의 고안이 필요하다. 본 증례보고는 임플란트 실패를 경험한 상악골 절제술 환자에게 잔존 임플란트를 이용한 가철성 국소의치(implant assisted removable partial denture, IARPD) 형태의 구개폐쇄장치를 제작하여 기능과 심미성 회복을 이룬 보철수복을 보고하고자 한다.

• 대한의용생체공학회:의공학회지
• /
• 제25권6호
• /
• pp.455-464
• /
• 2004

현재 인공고관절 전치환 수술 과정의 높은 난이도 때문에 숙련된 의사의 경험에 상당히 의존하고 있는 실정이다. 비구컵과 대퇴 임플란트의 위치 선정은 수술의 성공 여부와 밀접한 관계가 있지만 아직까지는 의사의 눈대중에 의해 이루어지는 경우가 많다. 이러한 이유로 인하여 인공삽입물(비구컵, 대퇴시스템) 삽입의 정확성이 낮아서 재치환술을 해야 하는 경우가 자주 발생한다. 본 연구에서는 환자 골반골(pelvis)과 대퇴골(femur)의 3차원적인 고유 기하학적 정보를 이용하는 모사 시술을 통하여 비구컵과 대퇴 임플란트의 정확한 위치를 선정하는 방법을 결정하였다. 이를 위하여 우선 비구컵의 위치 변화에 따른 대퇴 전염각 및 대퇴 경간각의 변화 양상을 살펴보았고 또한 대퇴 임플란트의 삽입 위치에 따른 대퇴스템 경부 길이 및 대퇴스템각의 변화 양상을 조사하였다. 본 연구에서 다양한 모사 시술을 통한 기하학적 정보의 분석 결과 비구컵과 대퇴 임플란트의 정확한 위치 선정이 가능함을 확인하였다. 본 연구의 모사 시술 방법을 이용하여 의사가 인공고관절 수술을 선행한다면 수술의 정확도와 숙련도를 향상시킬 수 있을 것으로 기대된다.

• 대한치과보철학회지
• /
• 제57권2호
• /
• pp.171-175
• /
• 2019

치조제가 심하게 흡수된 하악의 정확한 해부학적 구조를 채득하는 것은 매우 어렵다. 이 경우 보다 정확한 인상을 채득하기 위하여 수정모형 제작법을 통한 기능 인상 채득이 추천된다. 이를 위해서는 양측에 2개의 임플란트 크라운을 이용하여 적절한 고정원을 얻을 필요가 있다. 이를 통해 임플란트 피개의치에서는 불가능하였던 수정모형 제작법을 시행할 수 있다. 본 증례에서는 하악의 치조제가 심하게 흡수된 80세 여환을 하악 양측 견치 부위의 임플란트 크라운을 지대치로 한 가철성 국소의치를 이용하여 수복하였다. 가철성 국소의치의 금속구조물을 이용하여 개인 트레이를 제작하고 수정모형 제작을 위한 이차 인상을 채득하였다. 환자는 앞선 2회의 피개의치 실패 후 제작된 최종 보철물에 만족하였다. 치료 초기에 행해진 피개의치 치료에서는 부정확한 인상법에 따른 부적절한 보철물로 인해 술자와 환자 모두 만족하지 못했지만, 2개의 임플란트를 적절한 고정원으로 이용함으로써 성공적인 수복이 가능하였다.

• Archives of Plastic Surgery
• /
• 제49권2호
• /
• pp.158-165
• /
• 2022

Background Implant-based breast reconstruction has evolved tremendously in the last decades, mainly due to the development of new products and techniques that make the procedure safer and more reliable. The purpose of this study was to compare the outcomes in immediate one-stage breast reconstruction between acellular dermal matrix (ADM) and inferior dermal flap (IDF). Methods We conducted a retrospective comparative study of patients submitted to immediate breast reconstructions with an anatomical implant and ADM or IDF in a single center between 2016 and 2018. Outcomes evaluated included major complications, early complications, reinterventions, readmissions, and reconstruction failure. Simple descriptive statistics and univariate analysis were performed. Results A total of 118 breast reconstructions (85 patients) were included in the analysis. Patients in the IDF group had a higher body mass index (median = 27.0) than patients in the ADM group (median = 24). There were no statistically significant differences among both groups regarding immediate major complication, early complications, readmissions, and reinterventions. Conclusion There are no significant differences in complications between the ADM and IDF approach to immediate implant breast reconstruction. In patients with higher body mass index and large, ptotic breasts, we recommend an immediate implant reconstruction with IDF.

• 대한치과보철학회지
• /
• 제40권5호
• /
• pp.507-524
• /
• 2002

Load transfer of implant overdenture varies depending on anchorage systems that are the design of the superstructure and substructure and the choice of attachment. Overload by using improper anchorage system not only will cause fracture of the framework or screw but also may cause failure of osseointegration. Choosing anchorage system in making prosthesis, therefore, can be considered to be one of the most important factors that affect long-term success of implant treatment. In this study, in order to determine the effect of anchorage systems on load transfer in mandibular implant overdenture in which 4 implants were placed in the interforaminal region, patterns of stress distribution in implant supporting bone in case of unilateral vertical loading on mandibular left first molar were compared each other according to various types of anchorage system using three-dimensional photoelastic stress analysis. The five photoelastic overdenture models utilizing Hader bar without cantilever using clips(type 1), cantilevered Hader bar using clips(type 2), cantilevered Hader bar with milled surface using clips(type 3), cantilevered milled-bar using swivel-latchs and frictional pins(type 4), and Hader bar using clip and ERA attachments(type 5), and one cantilevered fixed-detachable prosthesis(type 6) model as control were fabricated. The following conclusions were drawn within the limitations of this study, 1. In all experimental models. the highest stress was concentrated on the most distal implant supporting bone on loaded side. 2. Maximum fringe orders on ipsilateral distal implant supporting bone in a ascending order is as follows: type 5, type 1, type 4, type 2 and type 3, and type 6. 3. Regardless of anchorage systems. more or less stresses were generated on the residual ridge under distal extension base of all overdenture models. To summarize the above mentioned results, in case of the patients with unfavorable biomechanical conditions such as not sufficient number of supporting implants, short length of the implant and unfavorable antero-posterior spread. selecting resilient type attachment or minimizing distal cantilever bar is considered to be appropriate methods to prevent overloading on implants by reducing cantilever effect and gaining more support from the distal residual ridge.

• Journal of Periodontal and Implant Science
• /
• 제49권6호
• /
• pp.382-396
• /
• 2019

Purpose: The purpose of this study was to elucidate the efficacy and safety of carbonate apatite (CO₃Ap) granules in 2-stage sinus floor augmentation through the radiographic and histomorphometric assessment of bone biopsy specimens. Methods: Two-stage sinus floor augmentation was performed on 13 patients with a total of 17 implants. Radiographic assessment using panoramic radiographs was performed immediately after augmentation and was also performed 2 additional times, at 7±2 months and 18±2 months post-augmentation, respectively. Bone biopsy specimens taken from planned implant placement sites underwent micro-computed tomography, after which histological sections were prepared. Results: Postoperative healing of the sinus floor augmentation was uneventful in all cases. The mean preoperative residual bone height was 3.5±1.3 mm, and this was increased to 13.3±1.7 mm by augmentation with the CO₃Ap granules. The mean height of the augmented site had decreased to 10.7±1.9 mm by 7±2 months after augmentation; however, implants with lengths in the range of 6.5 to 11.5 mm could still be placed. The mean height of the augmented site had decreased to 9.6±1.4 mm by 18±2 months post-augmentation. No implant failure or complications were observed. Few inflammatory cells or foreign body giant cells were observed in the bone biopsy specimens. Although there were individual differences in the amount of new bone detected, new bone was observed to be in direct contact with the CO₃Ap granules in all cases, without an intermediate layer of fibrous tissue. The amounts of bone and residual CO₃Ap were 33.8%±15.1% and 15.3%±11.9%, respectively. Conclusions: In this first demonstration, low-crystalline CO₃Ap granules showed excellent biocompatibility, and bone biopsy showed them to be replaced with bone in humans. CO₃Ap granules are a useful and safe bone substitute for two-stage sinus floor augmentation.

• Archives of Plastic Surgery
• /
• 제44권6호
• /
• pp.516-522
• /
• 2017

Background Implant-based breast reconstruction is being performed more frequently, and implants are associated with an increased risk of infection. We reviewed the clinical features of cases of implant infection and investigated the risk factors for breast device salvage failure. Methods We retrospectively analyzed 771 patients who underwent implant-based breast reconstruction between January 2010 and December 2016. Age, body mass index, chemotherapy history, radiation exposure, and smoking history were assessed as potential risk factors for postoperative infection. We also evaluated the presence and onset of infection symptoms, wound culture pathogens, and other complications, including seroma, hematoma, and mastectomy skin necrosis. Additionally, we examined the mastectomy type, the use of acellular dermal matrix, the presence of an underlying disease such as hypertension or diabetes, and axillary node dissection. Results The total infection rate was 4.99% (58 of 1,163 cases) and the total salvage rate was 58.6% (34 of 58). The postoperative duration to closed suction drain removal was significantly different between the cellulitis and implant removal groups. Staphylococcus aureus infection was most frequently found, with methicillin resistance in 37.5% of the cases of explantation. Explantation after infection was performed more often in patients who had undergone 2-stage expander/implant reconstruction than in those who had undergone direct-to-implant reconstruction. Conclusions Preventing infection is essential in implant-based breast reconstruction. The high salvage rate argues against early implant removal. However, when infection is due to methicillin-resistant S. aureus and the patient's clinical symptoms do not improve, surgeons should consider implant removal.

• 구강회복응용과학지
• /
• 제27권2호
• /
• pp.185-195
• /
• 2011

본 연구는 외부연결방식(external type)의 임프란트에서 기존의 타이타늄 지대주와 지르코니아 지대주를 각각의 임플란트와 연결하여 하중을 가한 후 임플란트 외부육각기둥(external hexgon)부분 및 platform 표면변화를 FESEM 상으로 관찰하고, 임프란트와 타이타늄 지대주 및 지르코니아 지대주의 Viker's 경도를 측정하였다. 1. 임프란트, 타이타늄 지대주 및 지르코니아 지대주의 Viker's 경도는 각각 평균 $309.80{\pm}11.78$ HV, $318.40{\pm}11.82$ HV, $1495.30{\pm}16.21$ HV였다. 임프란트와 타이타늄 지대주 사이에는 통계학적으로 유의성이 존재하지 않았지만(P>0.05, Anova), 임프란트와 지르코니아 사이에는 통계학적으로 유의성이 관찰되었다(P<0.05, Anova). 2. 10,000번 하중을 가한 후 임플란트 표면변화 관찰에서 타이타늄 지대주 그룹과 지르코니아 지대주 그룹 모두에서 마모가 관찰 되었으며, 지르코니아 지대주에서 보다 현저한 마모양상을 나타내었다. 본 연구에서 표면경도의 차이로 인하여 타이타늄 지대주를 사용할 때보다 지르코니아 지대주를 사용한 경우 임플란트의 external hexagon부분 및 플랫폼의 마모도가 현저하였다.

• 한국안전학회지
• /
• 제27권2호
• /
• pp.92-97
• /
• 2012

Risk management is the process that helps to identify hazards, analyze them, and then to create an action plan to avoid and mitigate these hazards. The main objective of risk management in product development and manufacturing is to provide safe and efficient products without spending too many resources. Medical device manufacturers also face enormous risks - regulatory, legal, and financial - based on their products and processes, and the concepts of risk management are particularly important because any single failure may result in serious damages to body or loss of life. In this regard, a set of guidelines for the application of risk management to medical devices has been issued by ISO and specified in the document ISO 14971 Medical devices - Application of risk management to medical devices. The main objective of this study is to investigate the application of risk management to dental implant development and manufacturing processes based on ISO 14971. A general risk management process is first introduced, and the application of ISO 14971 to dental implants is further investigated.