• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.211-215
• /
• 2008

This paper deals with the transient ground impedance of small-sized needle-rod installed in a test field, Impulse voltage generator was used to inject lightning impulse on a ground electrode and modified fall-of potential method was proposed to measure the high ground potential rise. Transient ground impedance was analysed with impedance curve and I-V curve as respects the resistivity of soil. Soil ionization near the ground electrode is activated in high resistivity soil and have an effect on the reduction of transient ground impedance significantly.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.95-99
• /
• 2004

A systematic approach of measurement, modeling and analysis of grounding system impedance in the field of lightning protection systems is presented. The measurement and analysis of ground impedance are based on a computer aided technique. The magnitude and phase of ground impedance were measured and analyzed by the modified fall-of-potential method and the proposed computer program algerian using the waveforms of the test current and potential rise. The theoretical analysis of ground impedance were performed with the equivalent circuit models, and the theoretical results were compared with the measured data.

• Journal of electromagnetic engineering and science
• /
• 제11권3호
• /
• pp.192-200
• /
• 2011

This paper proposes a new modeling method for estimating the impedance of an on-chip power/ground meshed plane. Frequency dependent R, L, and C parameters are extracted based on the proposed method so that the model can be applied from DC to high frequencies. The meshed plane model is composed of two parts: coplanar multi strip (CMS) and conductor-backed CMS. The conformal mapping technique and the scaled conductivity concept are used for accurate modeling of the CMS. The developed microstrip approach is applied to model the conductor-backed CMS. The proposed modeling method has been successfully verified by comparing the impedance of RLC circuit based on extracted parameters and the simulated impedance using a 3D-field solver.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 봄 학술발표회 논문집
• /
• pp.470-477
• /
• 2002

Possibility of passive piezoelectric damping based on a new shunting parameter estimation method is studied using finite element analysis. The adopted tuning method is based electrical impedance that is found at piezoelectric device and the optimal criterion for maximizing dissipated energy at the shunt circuit. Full three dimensional finite element model is used for piezoelectric devices with cantilever plate structure and shunt electronic circuit is taken into account in the model. Electrical impedance is calculated at the piezoelectric device, which represents the structural behavior in terms of electrical field, and equivalent electrical circuit parameters for the first mode are extracted using PRAP (Piezoelectric Resonance Analysis Program). After the shunt circuit is connected to the equivalent circuit for the first mode, the shunt parameters are optimally decided based on the maximizing dissipated energy criterion. Since this tuning method is based on electrical impedance calculated at piezoelectric device, multi-mode passive piezoelectric damping can be implemented for arbitrary shaped structures.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1637-1640
• /
• 2005

This paper presents a technique for electromagnetic field analysis on surge response due to Mid-span back-flashovers effects in lightning protection system of 500 kV EHV single circuit transmission tower by the neural networks method. These analyses are based on modeling lightning return stroke as well as on coupling the electromagnetic fields of the stroke channel to the line. The ground conductivity influences both the electric field as well as the coupling mechanism and hence the magnitude and wave shape of the induced voltage. The technique can be used to analyzed the corona voltage effect, the effective of stroke to the span tower, the surge impedance of transmission lines. The maximum voltage from flashovers effects in the lines. The model is compatible with general electromagnetic transients programs such as the ATP-EMTP. The simulation results show that this study analyses for time-domain with those produced by a cascade multi-section model, the surge impedance of a full-sized tower hit directly by a lightning stroke is discussed.

• 한국전자파학회논문지
• /
• 제25권10호
• /
• pp.1087-1094
• /
• 2014

본 연구에서는 유전체의 산란 특성 분석을 위해 이용되는 CFIE(Combined Field Integral Equation) 모멘트법의 계산효율을 높이기 위해 임피던스 경계면 조건을 적용시킨 수치해석 기법과 그 적용 범위에 대한 분석결과를 제시한다. 임피던스 경계면의 적용은 유전체의 등가 표면 전류(Js)와 등가 표면 자류(Ms)를 하나의 전류 또는 자류 성분으로 표현할 수 있으며, 임피던스 경계면 조건을 적용해 계산효율을 높인 수치해석 기법의 정확도는 기존의 CFIE 모멘트법과 이론값(Mie-series 해법, Small Perturbation 산란모델)을 이용하여 비교/분석하였다. 임피던스 경계면 조건을 적용한 수치해석 기법의 적용 범위 상대유전율 허수부 12 이상에서 1 dB 이내의 계산 편차를 확인하였다.

• 한국통신학회논문지
• /
• 제19권3호
• /
• pp.523-532
• /
• 1994

GTEM cell의 특성 임피던스에 대한 정확한 값을 알면 그것을 설계하는데 매우 유용하다. 본 논문은 전자파 감응성 및 복사 측정 모두에 사용할 수 있는 GTEM cell을 그의 개방각을 고려한 특성 임피던스에 대해 논한다. 해석을 위해 over-RGM에 대해 기술하고, 이 수치해석법을 구좌표계에 실시한다. 몇가지 결과를 다른 논문의 것들과 비교하고, 본 해석의 정당성을 입증한다. GTEM cell 단면 상의 기하학적 구조변화에 따른 특성 임피던스 값들을 구하고 개방각이 특성 임피던스에 미치는 영향을 보인다. 마지막으로 여러 개방각에 대한 단면 상의 전계 균일도를 구한다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제6권3호
• /
• pp.206-209
• /
• 2006

This paper presents an analytical noise model for the drain thermal noise, the induced gate noise, and their correlation coefficient in deep-submicron MOSFETs, which is valid in both linear region and saturation region. The impedance field method was used to calculate the external drain thermal noise current. The effect of channel length modulation was included in the analytical equation. The noise behavior of MOSFETs with decreasing channel length was successfully predicted from our model.

• 한국소음진동공학회논문집
• /
• 제14권8호
• /
• pp.668-674
• /
• 2004

The possibility of global noise reduction by the sound power control through selection of distribution and impedance of absorptive materials is discussed. It is necessary to investigate the relation between the global sound energy in the field and the total sound power radiated by sources. In the previous work,$^{(1.2)}$ the authors presented a useful design method to change boundary condition that can be useful to reduce noise in acoustically small enclosures. Changing boundary condition Is related to not only enclosure’s geometrical shape but also acoustical treatment on walls for example, attaching of impedance patches (ex: absorptive material). In many practical situations, we often meet situation to change acoustical treatment on walls. The possibility of total acoustic potential energy(globa1 noise) reduction by acoustic source power control is examined in an acoustically small cavity Using acoustic energy balance equation, the relation between global noise control performance and absorptive material’s arrangement/impedance is deduced. Numerical simulation is performed to interpret its physical meaning in terms of absorbent’s distribution and impedance.

• 대한전자공학회논문지TC
• /
• 제39권11호
• /
• pp.28-33
• /
• 2002

본 논문에서는 유한 차분 시간영역 해석법을 이용하여 PCS용 임피던스 정합 모노폴 마이크로스트립 안테나를 해석하였다. FDTD 격자를 나누기 위해서 Berenger 가 제안한 완전정합층 흡수경계조건을 사용하였다. 소스 신호로 Gaussian 펄스를 사용하고, 급전부는 내부저항 전압원을 적용시켜 모델링 하였다. FDTD법은 근계 해석 기술이므로 안테나의 방사패턴과 이득을 구하기 위해서는 시간영역과 주파수영역에 모두 적용이 가능한 근계를 원계로 변환하는 것이 필요하다. 따라서 원계 방사패턴을 계산하기 위해 주파수영역 변환을 사용하였다. FDTD법에 의해 얻어진 해석 결과는 HFSS 소프트웨어를 사용한 해석 결과와 비교 분석하였으며, 만족한 결과를 얻었다.