• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.445-446
• /
• 2012

Recently the interest in wireless power transfer have been studied. ECR (Electromagnetic Coupled Resonance) device, depending on the size of the frequency characteristics of the structure, increasing in volume and larger volume of wireless power transmission device to make use of ECR is a big barrier. So to solve this problem for ECR device miniaturization and high efficiency has been actively studied. In this paper, the size of the device for ECR IM (Impedance Matching) by applying a one-turn coil circuit, remove the device in the form of ECR Network Analyzer measured by removing the one-turn coil has demonstrated the possibility of the device in the form of ECR.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.382-387
• /
• 1999

The processes and the kinetics of the lithium intercalation into the spin coated $V_2O_5$ xerogel prepared by the sol-gel processing have been studied employing impedance analyzer. Homogeneous and quasi-isotropic thin films of the xerogel can be obtained as a result of random distribution of the $V_2O_5$ gels on the substrate by the use of the spin coating. Effective diffusion coefficient and charge transfer resistance vary more than one order of magnitude at high and low lithium composition in $V_2O_5$ xerogel, respectively.

• Progress in Superconductivity
• /
• v.4 no.1
• /
• pp.74-79
• /
• 2002

High-speed probe made to test single flux quantum(SFQ) circuits was comprised of semi-rigid coaxial cables and microstrip lines. The impedance was set at 50 $\Omega$to carry high-speed signals without much loss. To do performance test of high-speed probe, we have attempted to fabricate a test chip which has a coplanar waveguide(CPW) structure. Electromagnetic simulation was done to optimize the dimension of CPW so that the CPW structure has an impedance of 50$\Omega$, matching in impedance with the probe. We also used the simulation to investigate the effect of the width of signal line and the gap between signal line and ground plane to the characteristics of CPW structure. We fabricated the CPW structure with a gold film deposited on Si wafer whose resistivity was above $1.5\times$10$_4$$\Omega$.cm. The magnitudes of S／sub 21／ of CPW at 6 ㎓ in simulations and in the actual measurements done with a network analyzer were: -0.1 ㏈ and -0.33 ㏈ (type A),-0.2 ㏈ and -0.48 ㏈ (type B), respectively. Using the test chip, we have successfully tested the performance of high-speed probe made for SFQ circuits. The probe showed the good performance overthe bandwidth of 10 ㎓.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.3
• /
• pp.176-182
• /
• 2021

This research proposes a high-frequency circuit that can accurately predict the differential mode noise of single-phase inverters at the circuit design stage. Proposed single-phase inverter high frequency circuit in the work is a form in which harmonic impedance components are added to the basic single-phase inverter circuit configuration. For accurate noise prediction, parasitic components present in each part of the differential noise path were extracted. Impedance was extracted using a network analyzer and Q3D in the measurement range of 150 kHz to 30 MHz. A high-frequency circuit model was completed by applying the measured values. Simulations and experiments were conducted to confirm the validity of the high-frequency circuit. As a result, we were able to predict the resonance point of the differential mode voltage extracted as an experimental value with a high-frequency circuit model within an approximately 10% error. Through this outcome, we could verify that differential mode noise can be accurately predicted using the proposed model of the high-frequency circuit without a separate test bench for noise measurement.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2159-2160
• /
• 2006

본 논문은 단일주파수의 교류전류를 사용하고 8개의 접촉전극을 이용한 4 전극법방식으로 전신의 BIA (Bioelectrical Impedance Analysis)측정을 최소한의 경제적인 회로를 이용하여 구현한 체지방측정기의 개발에 관한 것이다.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.303-306
• /
• 2002

The EMI filter used in switching apparatus is designed on the basis of personal designer experience. A try and error approach leads to a considerables waste of time without assurance to come out to a good solution. The difficulty in the right choice of the component values resides on the dominant role played by their parasitic components at high frequencies and is aggravated by the poor knowledge of the internal impedance of the noise generators. In this paper, we proposed the design technique for the EMI filter effectively using the LISN and the EMI analyzer in the industrial field.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.10a
• /
• pp.67-67
• /
• 2011

본 논문에서는 접지시스템의 성능을 평가하기 위한 광대역 접지임피던스 분석기에 대하여 기술하였다. 시제작 측정기는 65 Hz~1.28 MHz의 신호발생부와 이득 20 dB, 출력 임피던스가 $0.1{\Omega}$인 전류 증폭부, 전압 및 전류 측정부, 신호처리부, 표시부로 구성된다. 또한, 외부 노이즈로 인한 측정의 오차를 줄이기 위하여 디지털 대역통과 필터를 적용하였다.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.5
• /
• pp.40-44
• /
• 1997

This paper presents the results of studies made for measuring the relative complex permittivity of PCB sheet material in he frequency a range of 100MHz∼1GHz using vector network analyzer. A measurement cell was developed for this purpose using broad-band impedance method and the dielectric constant and loss tangent of two PCBV sheet materials, glass-epoxy and teflon, were measured. The effect of copper cladding was studied.

• Journal of Preventive Medicine and Public Health
• /
• v.30 no.1 s.56
• /
• pp.31-43
• /
• 1997

Obesity usually is defined as the presence of and abnormally amount of adipose tissue. In many epidemiologic study, obesity as a health risk factor has been estimated by Body Mass Index(BMI) in general. This study was conducted to review of body fat percent measured by Bioelectric impedance analyzer as a estimator of obesity in a rural adult population. The study subjects were 421 men and 664 women who reside in the area on the Juam lake. They were sampled by multistage cluster sampling. Their mean age was 59 years old. Body fat percent increased with age, but BMI decreased with age in this study. Body fat percent was more larger at female and elder on the same BMI. The correlation coefficient between with body fat percent and body mass index was low (r=0.4737). Body fat percent was explained by not only BMI but also sex and age $(r^2=0.63)$. The result suggested that it is inadequate for BMI only to estimate obesity about elderly person who reside in the rural community. The relation of body fat percent and body mass index of this study agreed with the preceding know-ledges and studies in general.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.2
• /
• pp.273-280
• /
• 1999

This paper presents the design and implementation of circuit analyzer system for the convenient troubleshooting and diagnosis of the electronics appliance using the curve tracer technology of analog signature analysis. The circuit analyzer provides advanced troubleshooting capabilities to simplify testing newer technology components such as CMOS and MOS circuits, its built-in pulse generator lets thoroughly troubleshoot gate-fired devices such as SCRs, TRIACs and optocouplers. The circuit analyzer while the power to the circuitry testing is turned of, so that avoid an accidental short that could cause further damage, its allow to analyze the impedance state of a solid-state component, which makes it perfect for finding leakage or substrate damage that has brought a system or PCB down prematurely. Because it can compare suspect components to known-good equivalents, it's verified the ideal application for troubleshooting when documentation is missing or incomplete.