• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1577-1583
• /
• 2012

Penetrator with enhanced lateral effect (PELE) is a novel projectile that does not require dynamite and a fuse. It comprises a high-density jacket that is closed at its rear end and filled with a low-density filling material. To study the explosion characteristics of PELE using AUTODYN-3D code, the calculation models of the projectile body and the bullet target were developed and the process of penetrating an aluminum-2024 alloy target using PELE was simulated. The scattering characteristics after PELE penetrated the aluminum-2024 alloy target were studied for different filling materials. The explicit finite element analysis of PELE fragmentation was implemented with the stochastic failure criterion in AUTODYN-3D code. As the filling expanded, the fragments gained velocity and dispersed laterally, increasing the damage area considerably. The number and shape of PELE fragments differed depending on the impact pressure of the filling that fragmented during the penetration and lateral dispersion processes.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.229-232
• /
• 2003

A waste container, one of the key compartments in a multi-barrier system for a potential high level radioactive waste (HLW) repository in Korea ensures the mechanical stability against the lithostatic pressure of a deep geologic strata and the swelling pressure of the bentonite buffer. Also, it prohibits potential release of radionuclides for a certain period of time. before it is corroded by impurities. Even though the materials of a waste container is carefully chosen and all manufacturing processes are under heavy quality assurance, there might be a slight chance of intial defects in a waste container. Also, during the deposition of a waste container in a repository, there might be a chance of an incident affecting the integrity of a waste container. In this study, the FEP's and the scenarios over radiological impact of a potential initial waste container defect was developed. Then the total system performance assessment on this initial waste container failure (ICF) scenario was carried out by the MASCOT-K, one of the probabilistic safety assessment tools KAERI has developed. Results show that for the data set studied in this paper, the annual individual dose by the ICF scenario well meets the KINS regulation.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.4
• /
• pp.197-203
• /
• 2020

PURPOSE. The aim of this study was to evaluate the effect of multiple firings on the bond strength between yttriatetragonal zirconia polycrystals (Y-TZP) and 2 types of resin cements. MATERIALS AND METHODS. Sixty 3Y-TZP specimens (LAVA Frame Multi) were divided into 3 groups depending on the following firing procedures: (1) 2-firing cycles, (2) 5-firing cycles, (3) 10-firing cycles. Two samples from each group were investigated by using SEM to determine the morphological changes. All specimens were treated with 125 ㎛ airborne-particle abrasion and the surface roughness of each specimen was measured. The specimens from each firing group were then further divided into 2 subgroups (n = 9) to apply 2 types of resin cement (MDP-free resin cement: RelyX Unicem-RU, and MDP containing resin cement: Panavia F 2.0-PA). The shear bond strength (SBS) test was performed and failure types of all the debonded specimens were classified by using a stereomicroscope as adhesive, cohesive, and mixed. The statistical analysis of surface roughness and SBS data were performed by using 1-way ANOVA and 2-way ANOVA followed by Tukey-HSD tests (α=.05). Failure modes were calculated as a percentage for each group. RESULTS. The bond strength of RU and PA to the specimens obtained with 2 firings were not statistically different from each other (P=.1). However, the SBS values of PA were found to be significantly higher than RU for the specimens obtained with 5 and 10 firing cycles (P=.001 and P=.02, respectively). Surface roughness analysis revealed no statistical difference between groups (P=.2). The SEM analysis of samples fired 5- and 10- times showed irregularities and boundary loss in zirconia grains, and empty spaces between zirconia grains. CONCLUSION. The bond strength of PA cement was higher than that of RU to the zirconia subjected to repeated firings (5 and 10 firing cycles). When zirconia is subjected to multiple firings, using MDP-containing resin cement can be recommended.

• Korean Journal of Veterinary Service
• /
• v.34 no.2
• /
• pp.117-123
• /
• 2011

This experiment was conducted to investigate the presence of recognized abortifacient viruses from aborted fetuses and stillborn piglets in cases of reproductive failure in sows by PCR. A total of 219 samples of aborted fetuses or stillborn piglets, submitted to the School of Veterinary Medicine of Kangwon National University between 2006 and 2009 May, were collected from 5 provinces in Korea. Abortifacient virus infections were detected in 82 (37.4%) out of 219 aborted fetuses or stillborn piglets as well as on 39 (40.2%) out of 97 pig farms. The major viral infections were porcine circovirus type 2 (PCV2), porcine reproductive and respiratory syndrome virus (PRRSV) and Aujesky's disease virus (ADV) for which 46 (21%), 19 (8.6%) and 16 (7.3%) were positive, respectively, with 9 fetuses had complicated infection of PCV2+PRRSV or ADV or both. And 8 (3.6%) for SIV, 3 (1.3%) for PPV and 1 (0.4%) for JEV were positive as minor viral infection. The results suggest that PCV2, PRRSV, ADV is apparently the most important viral infectious agents associated with fetal infection leading to abortion or stillbirth in Korea. SIV, PPV and JEV might have a minor impact on reproductive disease.

• Journal of Periodontal and Implant Science
• /
• v.44 no.3
• /
• pp.102-108
• /
• 2014

Purpose: Rehabilitation of the incomplete dentition by means of osseointegrated dental implants represents a highly predictable and widespread therapy; however, little is known about potential risk factors that may impair long-term implant success. Methods: From 2004 to 2012, a total of 13,147 implants were placed in 4,316 patients at the Academy for Oral Implantology in Vienna. The survival rates after 8 years of follow-up were computed using the Kaplan-Meier method, and the impact of patient- and implant-related risk factors was assessed. Results: Overall implant survival was 97% and was not associated with implant length (P=0.930), implant diameter (P=0.704), jaw location (P=0.545), implant position (P=0.450), local bone quality (P=0.398), previous bone augmentation surgery (P=0.617), or patient-related factors including osteoporosis (P=0.661), age (P=0.575), or diabetes mellitus (P=0.928). However, smoking increased the risk of implant failure by 3 folds (P<0.001) and a positive history of periodontal disease doubled the failure risk (P=0.001). Conclusions: Summing up the long-term results of well over 10,000 implants at the Academy for Oral Implantology in Vienna it can be concluded that there is only a limited number of patients that do not qualify for implant therapy and may thus not benefit from improved quality of life associated with fixed implant-retained prostheses.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.1
• /
• pp.94-101
• /
• 1999

In this paper the problems associated with the switching surge of PWM inverter devices were analysed. As the application of ASD for efficient speed control of AC rmtors is increased, so is the rrntor and ASD-related failure increased. In the industrial rmtor awlications, the introduction of PWM drives can sometmes cause insulation breakdown between the phase windings due to high transient voltage peak. The motor cable length combined with the high switching frequency becomes more sensitive issue for proper drive operation. Effects of the cable length and high switching frequency influence both on rmtor and inverter. When the insulation level of rmtor winding is low, the failure probability caused by high peak voltage and fast voltage rise times(dv/dt) is high. Voltage refloctions are simulated far rmtor capacities, ASD and rise times and are presented graphically. The filtering techniques are discussed to reduce the rmtor terminal overvoltage and dv/dt in inverter fed AC rrntor drive systems. We confirmed that the lower motar capacity and rmtar insulation level, the shorter switching time and cable length and the higrer the probability of insulation breakdown .kdown .

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.771-775
• /
• 2008

Concerns related to protecting, identifying, and isolating of subsystems of a water distribution network have led to the realization of the increased importance of valves in the system. The most important purpose of valves in water distribution systems is to isolate subsystems due to breakage, maintenance activities, or contamination. A subsystem called segment is isolated by the closure of adjacent valves and an efficient algorithm should identify the adjacent valves to minimize the pipe failure impact. In this paper, an algorithm to identify adjacent valves to be closed to isolate a subsystem from the remainder of a network in case of a pipe failure is presented. An application to the water distribution system in Ottawa, Canada demonstrates the developed algorithm efficiently locates the adjacent valves for the isolation of a broken pipe.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.3
• /
• pp.91-96
• /
• 2011

The design, construction and management of underground facilities as infrastructure of nation should be properly carried out. One of reasons for underground facilitie's failure is a non-proper construction of backfill materials. This is common for circular underground pipes. A non-proper compaction is the cause of settlement and decrease of performance of underground facilities. The use of controlled low strength materials is an alternative to reduce the couple of failure problems. The flowability, self-cementation, and non-compaction are the major advantages to use the controlled low strength materials. In this research, couple of recycled materials, such as in-situ soil, water-treatment sludge, and crumb rubbers, were adopted. The basic properties of each materials were determined according to KS or ASTM. Also, couple of laboratory tests were carried out to get the design parameters for geotechnical and roadway area.

• Explosives and Blasting
• /
• v.37 no.1
• /
• pp.14-23
• /
• 2019

It has been an always issue for the blasting or the impact analysis to consider the strength characteristics of the rock materials associate with loading rate dependency. Due to the nature of transient loading, the dynamic rock test requires a careful technique to achieve the stress equilibrium state of the specimen. In this study, to investigate the relationship between the rock dynamic strength and the stress equilibrium state, a series of dynamic uniaxial compression tests for Pocheon granite were performed. As a result, the unbalanced stress state on the specimen can lead to the premature failure on the specimen and the less estimation of dynamic strength characteristic as well as the overestimation of strain rate. Consequently, a careful consideration of rock fracture process to achieve the dynamic force balance on the specimen should be required to make an reasonable evaluation of rock dynamic strength.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.46 no.6
• /
• pp.409-416
• /
• 2020

Objectives: The goal of this retrospective study was to determine the significance and impact of several factors on the alveolar cleft bone grafting procedure. Materials and Methods: The medical records were reviewed. In addition, x-rays were checked. The size of every cleft was measured in this retrospective study. The analyzed factors included sex, age, type of cleft, size of the cleft, and the type of flap used in surgery. The patients were characterized into group A (no complications, Bergland scale 1 or 2), group B (complications or Bergland scale 3), or group C (failure cases). Statistical analysis was performed with a P-value set at 0.05. Results: There were 32 cases in group A, 26 in group B, and 9 in group C. Multinomial logistic regression showed an association between the type of the cleft and the size of the cleft, with the presence of complications, or achieving type 3 on the Bergland scale, with odds ratios of 5.118 and 6.000, respectively. The type of cleft was related to failure with an odds ratio of 4.833. Given a small sample, statistical analysis could not be performed to evaluate the relationship between the size of the cleft and group C. Age, sex, and the type of the flap were not significant factors. Conclusion: The cleft size of more than 10 mm and bilateral clefts were listed regarding their effect on the procedure. Clinicians should not overlook these factors. In addition, patients must be informed of any risks that are present.