• Nuclear Engineering and Technology
• /
• v.52 no.2
• /
• pp.417-428
• /
• 2020

Investigations of the commercial aircraft impact effect on nuclear island infrastructures have been drawing extensive attention, and this paper aims to perform the safety assessment of Generation III nuclear power plant (NPP) buildings subjected to typical commercial aircrafts crash. At present Part III, the local damage of the rigid components of aircraft, e.g., engine and landing gear, impacting the steel concrete (SC) structures of NPP containment is mainly discussed. Two typical SC target panels with the thicknesses of 40 mm and 100 mm, as well as the steel cylindrical projectile with a mass of 2.15 kg and a diameter of 80 mm are fabricated. By using a large-caliber air gas gun, both the projectile penetration and perforation test are conducted, in which the striking velocities were ranged from 96 m/s to 157 m/s. The bulging velocity and the maximal deflection of rear steel plate, as well as penetration depth of projectile are derived, and the local deformation and failure modes of SC panels are assessed experimentally. Then, the commercial finite element program LS-DYNA is utilized to perform the numerical simulations, by comparisons with the experimental and simulated projectile impact process and SC panel damage, the numerical algorithm, constitutive models and the corresponding parameters are verified. The present work can provide helpful references for the evaluation of the local impact resistance of NPP buildings against the aircraft engine.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.4
• /
• pp.567-578
• /
• 2002

The main purpose of this study is to investigate the dynamic behaviour of containment building in nuclear power plant excited by aircraft impact loading using a lower order 8-node solid element. The yield and failure surfaces for concrete material model is formulated on the basis of Drucker-Prager yield criteria and are assumed to be varied by taking account of the visco-plastic energy dissipation. The standard 8-node solid element has prone to exhibit the element deficiencies and the so-called B bar method proposed by Hughes is therefore adopted in this study. The implicit Newmark method is adopted to ensure the numerical stability during the analysis. Finally, the effect of different levels of cracking strain and several types of aircraft loading are examined on the dynamic behaviour of containment building and the results are quantitatively summarized as a future benchmark.

• Geotechnical Engineering
• /
• v.11 no.4
• /
• pp.25-36
• /
• 1995

A specially designed model open -ended pile, which was composed of inner tube and outer tube, wry driven in the pressure chamber by two diffenent intallation methods, that is, impact -driving and vibratory driving, and static compression loading test was done for that pile. Through the measurement of bearing capacities in the separated resisting parts of open -ended pile, bearing mechanism of open-ended pile and soil plugging behaviors for different installation methods were studied. It appears that 20% out of soil plugging force of impact -driven pile was developed during driving, while the rest was developed during static compression loading and t.he magnitude of confining pressure applied to the chamber did not affect soil plugging behavior. Also. it appears that, soil plugging force of vibratory pile was not developed during driving, while it was developed weakly as about 0.5~0.7 times as that of impact pile during static compression loading. and the confining pressure of pressure rhamber had an effect on the soil plugging. In the ultimate loading condition unit soil plugging force did not approach to the failure condition.

• Journal of Korean Society for Quality Management
• /
• v.47 no.3
• /
• pp.615-630
• /
• 2019

Purpose: Based on the theory of "Stimulus-Organism-Response" (S-O-R), this thesis takes customer forgiveness as a medium variable to explore the impact of merchant service remedy on customer behavior intention in the context of online shopping service failure. This thesis divides the merchant service remedy into two dimensions: spiritual recovery and material recovery, and reveals the influence difference of different merchant service remedy methods on customer behavior intention and the mediating role of customer forgiveness. Methods : 325 questionnaires were distributed and 307 valid questionnaires were collected for data analysis. The relationship between potential variables is proposed by using Structural Equations Modeling. Results : The two dimensions of service recovery have significant positive impact on customer forgiveness, and physical recovery has greater impact on customer forgiveness. In the influence of physical recovery on customer behavior intention, customer forgiveness is a partial mediating effect. However, in the influence of spiritual recovery on customer behavior intention, customer forgiveness is a complete mediating effect. Conclusion : In case of service faults, merchants should take the initiative to provide appropriate physical recovery and provide spiritual recovery sincerely and patiently. Only in this way can they regain good impression in the hearts of consumers and promote them to improve the quality of service recovery, so as to increase their willingness to repurchase Intention and positive word of mouth.

• Korean small business review
• /
• v.43 no.4
• /
• pp.59-93
• /
• 2021

This study surveyed 413 small business owners who experienced closure to see how the loss perception experienced by small business owners affects their comeback through fear of failure. The analysis results are as follows. First, the larger the received loss of financial capital, market capital, and social capital, the greater the fear of failure. Second, the greater the fear of failure, the less willingness to re-start-up, but it did not affect the willingness to work. Third, perceived loss of financial capital, market capital, and social capital grew fear of failure, which negatively affected the willingness to re-start. However, as for the willingness to work, only the perception of loss to market competitiveness strengthened the willingness to work through fear of failure. This suggests that if you think you are out of business due to market competitiveness, you are more likely to choose to get a job than to start a business. Fourth, those with higher entrepreneurial self-efficiency had less effect of perceived loss on fair of failure than those with lower entrepreneurial loss. In other words, it can be seen that a person with high entrepreneurial self-efficiency is likely to start-up. It is noteworthy that despite the tendency to fail due to market competition and lack of understanding of risks, small business operators were most aware of the loss of social capital. This is presumed to have had the greatest impact on fear of failure because small business owners try to receive funding or business revitalization support through social networks such as acquaintances and relatives. Based on the above results, this study requires sufficient market research to secure a competitive advantage when preparing for start-ups through policy practice suggestions, and suggests ways to reduce financial loss through the establishment of sophisticated business plans.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.248-253
• /
• 2009

The propulsion system which apply the diesel engine with reduction gear as prime mover, generally installs the elastic coupling between engine and intermediate shaft, This coupling can isolate the vibratory torque excited by diesel engine, or the excess transient torque and moment occurring by external impact. So, diesel engine and reduction gear can safely operate by elastic coupling. Unfortunately, the elastic coupling for skimmer vessel was repeatedly broken by unknown vibration during the sea trial In this paper, the authors are searching for the possibilities and causes of the elastic coupling failure, via the global vibration measurement and the past incident investigation.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.7-13
• /
• 2011

RAMS is the procedure to maximize the reliability and availability of systems with managing operation rate, the frequency of failure in the system and repair method. Recently, all system life-cycle focusing on RAMS process has been rapidly developing in the field of railway vehicles, for example, applying th reliability management techniques for procurement and disposal of EMU. In particular, global economic recession require to reasonable measures for the EMU maintenance costs under the circumstances therefore, an alternative solution based on RCM(Reliability Centered Maintenance) which is the optimal maintenance method is interested. In this study, the state of being critical of each component and a primary factors was analyzed to improve VVVF inverter of the line 7 EMU by applying FMECA process. Furthermore, this paper showed the impact of connecting between the main and sub system. Based on these data, critical components according to malfunction ratings were classified by screening measures and improvements for each components was summarized.

• Journal of Aerospace System Engineering
• /
• v.1 no.3
• /
• pp.37-42
• /
• 2007

The flight safety system for the satellite launch vehicles is required in order to minimize the risk due to launch vehicle failure. For prompt and reliable decision of flight termination, the flight safety system usually uses multiple sensors to estimate launch vehicle's flight trajectory. In that case, multiple types of observed tracking data makes it difficult to identify the flight termination condition. Therefore, a fusion tracking filter handling the multiple tracking data is necessary for the flight safety system. This research developed a simulation software for generating multiple types of launch vehicle tracking data, and then processed the data with fusion filters.

• Geomechanics and Engineering
• /
• v.8 no.4
• /
• pp.523-540
• /
• 2015

Based on limit equilibrium principles, this study presents a theoretical derivation of a new analytical formulation for estimating magnitude and lateral earth pressure distribution on a retaining wall subjected to seismic loads. The proposed solution accounts for failure wedge inclination, unit weight and friction angle of backfill soil, wall roughness, and horizontal and vertical seismic ground accelerations. The current analysis predicts a nonlinear lateral earth pressure variation along the wall with and without seismic loads. A parametric study is conducted to examine the influence of various parameters on lateral earth pressure distribution. Findings reveal that lateral earth pressure increases with the increase of horizontal ground acceleration while it decreases with the increase of vertical ground acceleration. Compared to classical theory, the position of resultant lateral earth force is located at a higher distance from wall base which in turn has a direct impact on wall stability and economy. A numerical example is presented to illustrate the computations of lateral earth pressure distribution based on the suggested analytical method.

• Journal of Magnetics
• /
• v.21 no.3
• /
• pp.340-347
• /
• 2016

At the stroke end of an electromagnetic circuit breaker, the high speed of the mover makes a huge impact at the contact point, which induces the rebound problem of the mover that causes a breaker failure. Thus, a speed reduction equipment is required to address such problems. This study suggests to use an electric brake reduces the speed at the end of the stroke. The proposed circuit breaker which adopts the electric brake has a variable speed reduction function such that the continued rebound phenomenon ceases to occur. The electric brake is designed by the Finite Element Method (FEM) and the circuit and motion equations are solved using Time Difference Method (TDM). The comparisons between the simulation and experiments demonstrated the usefulness and validity of this study.