• Journal of the Korean Society of Safety
• /
• v.30 no.6
• /
• pp.7-11
• /
• 2015

The present study investigates the impact shear strength of thermal aged Sn-3Ag-0.5Cu lead-free solder joints at impact speeds ranging from 0.5 m/s to 2.5 m/s. The specimens were thermal aged for 24, 100, 250 and 1000 hours at $100^{\circ}C$. The experimental results demonstrate that the shear strength of the solder joint decreases with an increase in the load speed and aging time. The shear strength of the solder joint aged averagely decreased by 43% with an increase in the strain rate. For the as-reflowed specimens, the mode II stress intensity factor ($K_{II}$) of interfacial IMC between Sn-3.0Ag-0.5Cu and a copper substrate also was found to decrease from $1.63MPa.m^{0.5}$ to $0.97MPa.m^{0.5}$ in the speed range tested here. The degradations in the shear strength and fracture toughness of the aged solder joints are mainly caused by the growth of IMC layers at the solder/substrate interface.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.10
• /
• pp.945-954
• /
• 2004

Recently, specifications of flat display module is going to be higher definition, brightness and more wide viewing angle. On the other hand, physical thickness of those modules is forced to be slimmer and lighter. The flat display modules such as plasma or TFT-LCD employ thin crystallized panels that are normally weak to high level transient mechanical energy inputs. As a result, anti-shock performance is one of the most important design specifications of TFT-LCD modules. TFT-LCD module manufacturers and their customers like PC or TV makers perform a series of strict impact/drop test for the modules. However most of the large display module designs are generated based on engineer's own trial-error experiences. Those designs may result in disqualification from the drop/impact test during final product evaluation. A rigorous study on the impact failure of the displays is of course necessitated in order to avoid the problems. In this article, a systematic design evaluation is presented with combinations of FEM modeling and testing to support the optimal shock proof display design procedure.

• Asia-Pacific Journal of Business
• /
• v.15 no.1
• /
• pp.179-192
• /
• 2024

Purpose - The purpose of this study is to examine the effect of entrepreneurial experience, business model innovation and financing on new venture performance. Design/methodology/approach - This study analyzes survey data on new ventures in Korea and investigated research hypothesis by multiple regression analysis. Findings - Founders' prior startup experience have different impacts on performance depending on whether they had a successful or failed startup. Successful experience has a positive impact on early performance, while failure experience has a negative impact. Business model innovation shows a positive and significant relationship with early performance. External financing has different effects depending on the type of funding source and performance variables. VC funding is positively related to employment creation, while government R&D funding is negatively related to sales volume. Research implications or Originality - This study confirms that the impact of entrepreneurial experience on early performance varies depending on the characteristics of successful and unsuccessful entrepreneurs. It also empirically confirms that business model innovation has a significant impact on early performance. We empirically examine the relationship between various external financing sources of venture firms and early performance. Since the effects of entrepreneurial experience, business model innovation, and external financing on early stage performance may be different, entrepreneurs should consider these relationships when pursuing early stage business opportunities.

• Advances in concrete construction
• /
• v.15 no.3
• /
• pp.161-170
• /
• 2023

Ultra-high-performance concrete (UHPC) is produced using high amount of cementitious materials, very low water/cementitious materials ratio, fine-sized fillers, and steel fibers. Due to the dense microstructure of UHPC, it possesses very high strength, elasticity, and durability. Besides that, the UHPC exhibits high ductility and fracture toughness due to presence of fibers in its matrix. While the high ductility of UHPC allows it to undergo high strain/deflection before failure, the high fracture toughness of UHPC greatly enhances its capacity to absorb impact energy without allowing the formation of severe cracking or penetration by the impactor. These advantages with UHPC make it a suitable material for construction of the structural members subjected to special loading conditions. In this research work, the UHPC mixtures having three different dosages of steel fibers (2%, 4% and 6% by weight corresponding to 0.67%, 1.33% and 2% by volume) were characterized in terms of their mechanical properties including facture toughness, before using these concrete mixtures for casting the slab specimens, which were tested under high-energy impact loading with the help of a drop-weight impact test setup. The effect of fiber content on the impact energy absorption capacity and central deflection of the slab specimens were investigated and the equations correlating fiber content with the energy absorption capacity and central deflection were obtained with high degrees of fit. Finite element modeling (FEM) was performed to simulate the behavior of the slabs under impact loading. The FEM results were found to be in good agreement with their corresponding experimentally generated results.

• Knowledge Management Research
• /
• v.16 no.1
• /
• pp.71-93
• /
• 2015

With the rapid growth of the internet, electronic commerce has become accepted as one of the major purchasing channels for consumers. As more and more consumers search for and purchase products through the internet, intra-industry competition of electronic commerce has become fierce. Therefore, electronic commerce service providers pay attention to factors that prevent existing customers from leaving there services in the service failure situation. In this regard, electronic commerce service providers should make service recovery efforts for consumer recovery satisfaction after service failure. In this study, we suggest that procedural justice, interactional justice, distributive justice and authenticity have positive impacts on recovery satisfaction. In addition, we also propose that involvement plays moderating roles in the relationships between procedural justice, interactional justice, distributive justice, authenticity and recovery satisfaction. We collected empirical data for this study over a period of two weeks from subjects who had service failure recovery experiences through electronic commerce. A total of 224 complete and valid responses were obtained. We carried out data analysis using a two-step methodology with SPSS 20.0 and SmartPLS 2.0. The first step in the data analysis was to establish the internal consistency, convergent validity, discriminant validity of the constructs. In the second step, we examined the structural model. The empirical results support the proposed model and partly identify the moderating effect of involvement differences. The moderate effect results show that procedural justice, distributive justice and authenticity have different impacts on recovery satisfaction in two groups. Cognitive factor such as the procedural justice and distributive justice have stronger impacts on recovery satisfaction in the high-involvement goods than in the low-involvement goods, while emotional factor such as authenticity has a stronger impact on recovery satisfaction in the low-involvement goods than in the high-involvement goods. We expect that this result will provide researchers and managers who are interested in electronic commerce service failure recovery with useful theoretical and practical implications.

• Journal of Korea Water Resources Association
• /
• v.33 no.5
• /
• pp.647-658
• /
• 2000

The purpose of this study is to estimate the forward impact of water supply bottleneck using a supply-side input-output model. The failure cost analysed in this study can be used to estimate the values of the water supply reliability and can provide the bases of policy decision for the effective reallocation when water supply constraint will occur. So the position of water supply in the national economy is identified, and direct and indirect impacts are estimated by means of the interindustry analysis. Also the failure cost index is suggested to determine the prior order of water supply important in drought. By the way, the occurrence of drought having regional properties, the failure cost of the regional level using a national input-output table may be overestimated or underestimated. For the preceding reason, the failure cost estimated by a national input-output table is compared with and analysed to a regional input-output table for Kyung- Nam.g- Nam.

• Tribology and Lubricants
• /
• v.31 no.2
• /
• pp.35-41
• /
• 2015

A water-pump located in the cooling area of a car circulates cooling water. A particular bearing element, known as a water-pump bearing, installed in the rotating part carries the entire load. The failure of this water-pump bearing has a direct impact on the failure of the automobile engine, and so securing its reliability is crucial. Several researchers have examined the design principles of the water-pump bearing, but there are no reports on the life characteristic of the bearing yet. Herein, we report the construction of test equipment to reproduce the spalling of the roller contact, which is the main failure mode of the chosen water-pump bearing. We chose the radial load as an accelerated stress factor and validated the failure mode by monitoring the surface defects. We conducted the accelerated life test after determining the accelerated stress level through a combination of finite element analysis and a preliminary test. In the life tests, we used an accelerometer to perform failure diagnosis. In the last stage of this study, we present a statistical reliability analysis. Thus, we fully estimated the shape parameter of the water-pump bearing, accelerating level on the load , and the lifetime (MTTF and B₁₀ life) under real use conditions, and finally proposed an interval estimation value considering the uncertainty of the estimated value.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.2
• /
• pp.714-727
• /
• 2015

The hierarchical structure in networks is widely applied in many practical scenarios especially in some emergency cases. In this paper, we focus on a tree network with and without packet loss where one source sends data to n destinations, through m relay nodes employing random linear network coding (RLNC) over a Galois field in parallel transmission systems. We derive closed-form probability expressions of successful decoding at a destination node and at all destination nodes in this multicast scenario. For the convenience of computing, we also propose an upper bound for the failure probability. We then investigate the impact of the major parameters, i.e., the size of finite fields, the number of internal nodes, the number of sink nodes and the channel failure probability, on the decoding performance with simulation results. In addition, numerical results show that, under a fixed exact decoding probability, the required field size can be minimized. When failure decoding probabilities are given, the operation is simple and its complexity is low in a small finite field.

• International journal of advanced smart convergence
• /
• v.9 no.3
• /
• pp.227-231
• /
• 2020

Recently, the importance of user experience (UX) has been rapidly increasing. Its utilization is emphasized for development of systems, products, and services. User experience is widely used across industries including services, products, processes, society, and culture. Therefore, if it is unsatisfactory, it is likely to have a direct negative impact on the corresponding system, product, or service. The failure to analyze user experience causes significant damage to the project, which may lead to its failure or redevelopment; it is hence necessary to prioritize the verification of UX in the earliest stages of development. The requirements development stage, which is a preceding stage, is an appropriate stage for the verification of user experience because the identification of user needs is completed and prototypes can be implemented. In this paper, we proposed a systematic requirements development stage; it adds user experience verification activities to the requirements development stage, using the Honeycomb model, which is a widely used tool for verifying the overall UX. User experience verification was added to the existing requirements development activities, which consisted of three steps: model definition and requirements placement, discussions between external and internal stakeholders, and review by internal stakeholders. By easily validating the user experience through this systematic requirements development stage, we expect to minimize the damage to the project due to the failure of the user experience analysis and increase the possibility of success.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.793-796
• /
• 2008

The failure of expansion joint for bridge is generally occurred on the non-shrinkage mortar and other problem is the release of anchors in expansion joint due to the impact and vibration during the driven car on the bridge. In this study, to overcome the failure of expansion joint by the failure of non-shrinkage, the elastomeric mortar is developed. The pull-out capacity developed elastomeric mortar compared with that of non-shrinkage mortar. Moreover the anchor system which can be change easily and prevent a fracture of expansion joint is developed.