• The korean journal of orthodontics
• /
• v.48 no.5
• /
• pp.283-291
• /
• 2018

Objective: This study was conducted to perform histomorphometric evaluations of the bone surrounding orthodontic miniscrews according to their proximity to the adjacent tooth roots in the posterior mandible of beagle dogs. Methods: Four male beagle dogs were used for this study. Six orthodontic miniscrews were placed in the interradicular spaces in the posterior mandible of each dog (n = 24). The implanted miniscrews were classified into no loading, immediate loading, and delayed loading groups according to the loading time. At 6 weeks after screw placement, the animals were sacrificed, and tissue blocks including the miniscrews were harvested for histological examinations. After analysis of the histological sections, the miniscrews were categorized into three additional groups according to the root proximity: high root proximity, low root proximity, and safe distance groups. Differences in the bone-implant contact (BIC, %) among the root proximity groups and loading time groups were determined using statistical analyses. Results: No BIC was observed within the bundle bone invaded by the miniscrew threads. Narrowing of the periodontal ligament space was observed in cases where the miniscrew threads touched the bundle bone. BIC (%) was significantly lower in the high root proximity group than in the low root proximity and safe distance groups. However, BIC (%) showed no significant differences among the loading time groups. Conclusions: Regardless of the loading time, the stability of an orthodontic miniscrew is decreased if it is in contact with the bundle bone as well as the adjacent tooth root.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.43 no.4
• /
• pp.276-281
• /
• 2017

This case series study demonstrates the possibility of successful implant rehabilitation without bone augmentation in the atrophic posterior maxilla with cystic lesion in the sinus. Sinus lift without bone graft using the lateral approach was performed. In one patient, the cyst was aspirated and simultaneous implantation under local anesthesia was performed, whereas the other cyst was removed under general anesthesia, and the sinus membrane was elevated in a second process, followed by implantation. In both cases, tapered 11.5-mm-long implants were utilized. With all of the implants, good stability and appropriate bone height were achieved. The mean bone level gain was 5.73 mm; adequate bone augmentation around the implants was shown, the sinus floor was moved apically, and the cyst was no longer radiologically detected. Completion of all of the treatments required an average of 12.5 months. The present study showed that sufficient bone formation and stable implantation in a maxilla of insufficient bone volume are possible through sinus lift without bone materials. The results serve to demonstrate, moreover, that surgical treatment of mucous retention cyst can facilitate rehabilitation. These techniques can reduce the risk of complications related to bone grafts, save money, and successfully treat antral cyst.

• Journal of Periodontal and Implant Science
• /
• v.50 no.1
• /
• pp.38-47
• /
• 2020

Purpose: The aim of this study was to investigate the available alveolar bone height between the maxillary molars and the sinus floor according to their anatomical relationship using cone-beam computed tomographic (CBCT) images. Methods: A total of 752 maxillary first (M1) and second molars (M2) on CBCT scans of 188 patients were selected. First, each maxillary molar was categorized as type 1, 2, 3, or 4 according to the relationship of the molar root with the maxillary sinus floor. The frequency distribution of each type was analyzed. Second, the shortest vertical distance (VD) of each molar was measured from the furcation midpoints of the roots to the lowest point of the sinus floor by 2 observers. Intraclass correlation coefficients and the t-test were calculated for the VD measurements. Results: For M1, type 3 was the most frequent, followed by type 2. For M2, type 3 was the most common, followed by type 1. The VD measurements of type 1 were 9.51±3.68 mm and 8.07±2.73 mm for M1 and M2, and those of type 3 were 3.70±1.52 mm and 4.03±1.53 mm for M1 and M2, respectively. The VD measurements of M2 were significantly higher in female patients than in male patients. Conclusions: Type 3 was the most frequent anatomical relationship in the maxillary molars, and showed the lowest alveolar bone height. This information will help clinicians to prevent complications related to the maxillary sinus during maxillary molar treatment and to predict the available bone height for immediate implant planning.

• The Journal of Korean Academy of Prosthodontics
• /
• v.30 no.3
• /
• pp.361-378
• /
• 1992

The purpose of this investigation was to evaluate the effect of the porous hydroxyapatite particles (Interpore $200^{(R)}$) and guided tissue regeneration membrane ($Gore-Tex^{TM}$ augmentation material) on amount and shape of generating new bone adjacent to implant. Implants were placed immediately after extraction in the bilateral 3rd, 4th premolars of the mandible of the adult dogs. In all experimental groups, artificial bony defects were formed at the buccal cortex area, 3.3mm in width and 3.0mm in depth. In the control group : sutured without HA particles & membranes after placing implants, the experimental group 1 : membrane was place over the artificial bony defect, the experimental group 2 : bony defect was filled with HA particles and covered with membrane. The examination of bone-implant interfaces using light microscope and fluorescent microscope concluded as follows. 1. In all three experimental groups, osseointegration was observed without epithelial migration. 2. In the healing degree of bony defect area, the experimental group 1, 2 showed more prominent healing than control group, and the experimental group 1 showed the most excellent bone formation. 3. In fluorescent microscopic finding, bone remodeling was observed in regenerated bone tissue at defect area of experimental group 1, but in experimental group 2, irregular, discontinuous linear fluorescence was observed at the lower portion of defect area and sign of bone remodeling was weak.

• Anatomy and Cell Biology
• /
• v.56 no.4
• /
• pp.456-462
• /
• 2023

Plate fixation has become the preferred approach for treating displaced midshaft clavicle fractures. However, plate fixation of the clavicle presents several unique challenges, including its complex bony architecture and its immediate subcutaneous location. In many cases, we have observed that precontoured implants do not conform to the clavicular anatomy, and many patients complain of postoperative implant-related discomfort. A total of 111 clavicles, both left and right sides, were examined to match two commonly used designs of anatomical pre-contoured superior anterior clavicle plates, with and without lateral extension. The anteroposterior (AP) plane congruence of the plate to the underlying bone, the vertical gap between the bone and plate, and the length of the plate that was off the bone either anteriorly and/or posteriorly at both ends of the clavicle were measured. The scoring system was used to determine the fit of the implant on the clavicle as anatomic, good, or poor. We found that the maximum superior bow of the clavicle was lateral to the midline by 30.75 mm and 30.5 mm on the right and left sides, respectively. The magnitude of the bow was 4.28 mm and 4.46 mm on the right and left sides, respectively. We also found that the plate was a poor fit in 75.86% of cases on the left side and 73.5% of cases on the right side. Manipulating the plates during surgery was very difficult in the AP plane.

• Archives of Plastic Surgery
• /
• v.50 no.6
• /
• pp.557-562
• /
• 2023

Augmentation mammoplasty is one of the most popular cosmetic surgeries, but there is a high reoperation rate (29.7%) commonly due to capsular contracture, implant malpositioning, infection, and unsatisfactory size. Although infection only accounts for 2% of cases, its management is very challenging, especially with nontuberculous mycobacteria (NTM) infection. Breast prosthetic NTM infection is a rare but is a disastrous condition with an incidence of approximately 0.013%. Immediate salvage reimplantation is usually not suggested, and most studies recommend a gap of 3 to 6 months after combination antibiotics therapy before reimplantation. However, delayed reimplantation often leads to great psychological stress and struggle between the doctor and patient. We present the case report of successful reimplantation in treating prosthetic NTM infections in a 28-year-old female. We discuss a novel technique "transaxillary capsulorrhaphy" to correct the bottoming-out deformity. One year after the combination of antibiotics and surgery, the follow-up computed tomography scan showed complete remission of NTM without recurrence. We discuss the surgical technique in detail. The 1-year follow-up assessment (photos and dynamic video) revealed good cosmesis and reliable correction using the new technique. This report is the first formal description and discussion of one-stage reimplantation following NTM infections. Transaxillary capsulorrhaphy allows for a successful salvage operation when an implant is displaced. This approach provides highly favorable result in eastern women undergoing revision augmentation mammoplasty. This study reflects level of evidence V, considering opinions of respected authorities based on clinical experience, descriptive studies, or reports of expert committees.

• The korean journal of orthodontics
• /
• v.37 no.6
• /
• pp.400-406
• /
• 2007

The purpose of this experimental study was to evaluate the effect of immediate orthodontic loading on the stability at the bone-implant interface of titanium miniscrews in a rabbit model. Methods: Forty titanium miniscrews (1.6 mm diameter, 8 mm length) were inserted in the tibiae of 10 rabbits. Twenty test group miniscrews were subjected to continuous orthodontic forces of 200g immediately after implantation for a period of 6 weeks. The remaining 20 control group miniscrews were left unloaded for the same follow-up interval. Removal torque values were recorded using a digital torque gauge. An independent t-test was performed. Results: All the miniscrews were stable, and exhibited no mobility or displacement throughout the experimental period. Histologically, miniscrews were well-integrated into bone. No statistically significant differences in removal torque data were found between the loaded test and the unloaded control groups. Conclusions: These findings suggest that titanium miniscrews can be used as anchoring units for orthodontic tooth movement immediately after insertion.

• Journal of Periodontal and Implant Science
• /
• v.24 no.2
• /
• pp.271-282
• /
• 1994

Active treatment of periodontal disease consists of plaque control by the patient, with root planing and surgery perfomed by the dental practitioner. Chlorhexidine rinse has been the most effective antiplaque agent available today and tetracycline has been the most favored antibiotics. Therefore, the purpose of this study was compared the different effect among groups(saline mouthrinse[group I], 0.125% chlorhexidine mouthrinse [groupII], and 0.125% chlorhexidine mouthrinse containing tetracycline[groupIII]) during the immediate post periodontal therapy. We assessed plaque index, gingival index, papillary bleediing index, gingival crevicular volume, periodontal attachment loss, and periodontal pocket depth in 3 sites per subject. The assessment was made at baseline. At 1 week after scaling, and at 2 weeks after curettage. All groups were clinically and statistically reduced plaque score, gingival score, papillary bleeding score, and gingival crevicular volume at 2 weeks after curettage. Group II was significantly reduced periodontal pocket depth.(P<0.05) At 1 week after scaling, al clinical index scores were reduced but not singificantly difference between the groups.(p>0.05) At 2 weeks after curettage, plaque score, gingival score and papillary bleeding score were significantly difference between the groups.(P<0.05) During the experimental period, gingiva was not damaged and stain of the tongue or teeth were not noted in all groups.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.5
• /
• pp.430-435
• /
• 2006

Purpose : The aim of this study was to investigate healed bovine bone particles ($Bio-Oss^{(R)}$) and absorbable collagen sponge ($CollaPlug^{(R)}$) applied extraction socket site at 4-6 months' post-extraction. Material and methods : From August, 2004 to October, 2005, 17 sockets in 5 adult patients were selected out of the patients whose received ridge preservation using bovine bone particles and absorbable collagen sponges at Dept. of oral and maxillofacial surgery in Samsung Medical Center. There were 5 male patients, ages 30 to 58 years. Immediate postoperation and 4-6 months after operation study models were compared to evaluate the ridge dimension by measuring vertical height and horizontal width of alveolar ridge. Results : The measurements at 4-6 months revealed, in the ridge dimension, a loss of vertical height of 0.91${\pm}$0.40mm and horizontal width of 1.25${\pm}$0.58mm. There was no adverse reaction. Conclusion : This study suggests that treatment of extraction sockets with graft materials and collagen sponges is valuable in preserving alveolar bone in extraction sockets and preventing alveolar ridges defects.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.39 no.1
• /
• pp.27-30
• /
• 2013

Dental implantation in the mandibular anterior region is considered a safe and reliable surgical procedure. On the other hand, several articles have reported that inadvertent hemorrhage of the sublingual artery can result in life-threatening airway obstruction. Surgical ligation under intubation or tracheostomy is the most widely used approach for controlling mouth floor bleeding in this highly vascular region. Nonetheless, surgically exploring the bleeding focus is difficult because of anatomical distortion followed by widespread edema and swelling. Since swelling of the mouth floor advances quickly, timely management is essential for favorable postoperative outcome. This paper reports a case of immediate hemorrhage control with angiographic embolization to perform rapid hemostasis before the ongoing swelling causes airway obstruction. Less invasive, angiographic embolization can prevent neurovascular damage during a surgical exploration of injured vascular structures on the mouth floor.