• Korean Chemical Engineering Research
• /
• 제47권4호
• /
• pp.410-417
• /
• 2009

중간세공크기(mesopore)의 MCM41에 Imidazole을 담지시킨 CP-MS41 고체 입자의 촉매를 사용하여 GMA 용액에 $CO_2$를 흡수시켜 $CO_2$의 흡수기구로부터 GMA와 $CO_2$의 반응속도론을 고찰하였다. 대기압에서 회분식 흡수조를 사용하여 임펠러의 교반속도, 50 rpm, 촉매, 2 g, 반응온도, 60, 70, $80^{\circ}C$, GMA의 농도, $0.1{\sim}3.0kmol/m^3$, 용제, DMA, NMP, DMSO에서 측정한 $CO_2$의 흡수속도와 경막설에 의한 물질수지식을 사용하여 반응속도상수를 구하였다.

• 한국재료학회지
• /
• 제20권12호
• /
• pp.681-685
• /
• 2010

The application of flip chip technology has been growing with the trend of miniaturization of electronic packages, especially in mobile electronics. Currently, several types of adhesive are used for flip chip bonding and these adhesives require some special properties; they must be solvent-free and fast curing and must ensure joint reliability against thermal fatigue and humidity. In this study, imidazole and its derivatives were added as curing catalysts to epoxy resin and their effects on the adhesive properties were investigated. Non-isothermal DSC analyses showed that the curing temperatures and the heat of reaction were dependent primarily on the type of catalyst. Isothermal dielectric analyses showed that the curing time was dependent on the amount of catalysts added as well as their type. The die shear strength increased with the increase of catalyst content while the Tg decreased. From this study, imidazole catalysts with low molecular weight are expected to be beneficial for snap curing and high adhesion strength for flip chip bonding applications.

• Macromolecular Research
• /
• 제10권2호
• /
• pp.122-126
• /
• 2002

A molecularly imprinted polymer (MIP) having both amidine and imidazole functional groups in the active site has been prepared using p-nitrophenyl phosphate as a transition state analogue (TSA). The imprinted polymer MIP with amidine and imidazole found to have the highest hydrolysis activity compared with other MIPs with either amidine or imidazole groups only. It is postulated a cooperative effect between amidine and imidazole in the hydrolysis of p-nitrophenyl methyl carbonate (NPMC) as a substrate when both groups were arranged in proximity by molecular imprinting. The rate enhancement of the hydrolysis by MIP was 60 folds over the uncatalyzed solution reaction and two folds compared with the control non-imprinted polymer CPI having both functional groups. The enzyme-mimetic catalytic hydrolysis of p-nitrophenyl acetate by MIP was evaluated in buffer at pH 7.0 with $K_{m}$ of 1.06 mM and $k_{cat}$ of 0.137 $h^{-1}$ . . .

• Bulletin of the Korean Chemical Society
• /
• 제10권2호
• /
• pp.172-177
• /
• 1989

Stereoselective solvolyses of optically active activated esters in the aggregate system of optically active polymeric surfactants containing imidazole and benzene moieties were performed. The catalyst polymers employed were copolymers of N-methacryloyl-L-histidine methyl ester (MHis) with N,N-dimethyl-N-hexadecyl-N-[10-(p-methacryloylo xyphenoxycarbonyl)-decyl]ammonium bromide(DEMAB). In the solvolyses of N-carbobenzoxy-D- and L-phenylalanine p-nitrophenyl esters (D-NBP and L-NBP) by polymeric catalysts, copoly(MHis-DEMAB) exhibited not only increased catalytic activity but also enhanced enantioselectivity as the mole ${\%}$ of surfactant monomers in the copolymers increased. The polymeric catalysts showed noticeable enantioselective solvolyses toward D- and L-NBP of the substrates employed. As the reaction temperature was lowered for the solvolyses of D- and L-NBP with the catalyst polymer containing 3.5 mole ${\%}$ of MHis, the increased reaction rate and enhanced enantioselectivity were observed. The coaggregative systems of the polymer and monomeric surfactants were also investigated. In the case of coaggregate system consisted of 70 mole ${\%}$ of cetyldimethylethylammonium bromide with polymeric catalyst showed maximum enantioselective catalysis, viz., $k_{cat}(L)/k_{cat}(D)$ = 2.85. The catalyst polymers in the sonicated solvolytic solutions were confirmed to form large aggregate structure by electron microscopic observation.

• Bulletin of the Korean Chemical Society
• /
• 제30권5호
• /
• pp.1057-1060
• /
• 2009

Boric acid ($BO_3H_3$) is an inexpensive, efficient and mild catalyst for the synthesis of 2,4,5-triaryl-1H-imidazoles in excellent yields from the one-pot three-component condensation of benzil/benzoin, an aldehydes and ammonium acetate in aqueous media under ultrasound at room temperature. The remarkable advantages offered by this method are green catalyst, mild reaction conditions, simple procedures, much faster reactions and excellent yield of products.

• Carbon letters
• /
• 제27권
• /
• pp.42-49
• /
• 2018

A citric acid functionalized graphene oxide nanocomposite was successfully synthesized and the structure and morphology of the nanocatalyst were comprehensively characterized by Fourier transform infrared spectroscopy, energy-dispersive X-ray analysis, X-ray diffraction patterns, atomic force microscopy images, scanning electron microscopy images, transmission electron microscopy images, and thermogravimetric analysis. The application of this nanocatalyst was exemplified in an important condensation reaction to give imidazole derivatives in high yields and short reaction times at room temperature. The catalyst shows high catalytic activity and could be reused after simple work up and easy purification for at least six cycles without significant loss of activity, which indicates efficient immobilizing of citrate groups on the surface of graphene oxide sheets.

• Journal of Welding and Joining
• /
• 제29권4호
• /
• pp.54-60
• /
• 2011

Adhesive bonding is one of the most promising joining methods which may substitute for conventional metallurgical joining processes, such as welding, brazing and soldering. Curing behavior and mechanical properties of adhesive joint are largely dependent on the curing agent including hardener and catalyst. In this study, effects of curing system on the curing behavior and single-lap shear strength of epoxy adhesive joint are investigated. Dihydrazide, anhydride and dicyandiamide(DICY) were chosen as hardener and imidazole and triphenylphosphine(TPP) were chosen as catalyst. In curing behavior, TPP showed the delay of the curing rate for DICY and ADH at $160^{\circ}C$, compared to imidazole catalyst due to the high curing onset/peak temperature. DICY seemed to be most beneficial in the joint strength for both steel and Al adherends, although the type of adherends affected the shear strength of epoxy adhesive joint.

• 한국재료학회지
• /
• 제32권2호
• /
• pp.98-106
• /
• 2022

Metal-organic frameworks (MOFs) are widely used in various fields because they make it easy to control porous structures according to combinations of metal ions and organic linkers. In addition, ZIF (zeolitic imidazolate framework), a type of MOF, is made up of transition metal ions such as Co²⁺ or Zn²⁺ and linkers such as imidazole or imidazole derivatives. ZIF-67, composed of Co²⁺ and 2-methyl imidazole, exhibits both chemical stability and catalytic activity. Recently, due to increasing need for energy technology and carbon-neutral policies, catalysis applications have attracted tremendous research attention. Moreover, demand is increasing for material development in the electrocatalytic water splitting and metal-air battery fields; there is also a need for bifunctional catalysts capable of both oxidation/reduction reactions. This review summarizes recent progress of bifunctional catalysts for electrocatalytic water splitting and metal-air batteries using ZIF-67. In particular, the field is classified into areas of thermal decomposition, introduction of heterogeneous elements, and complex formation with carbon-based materials or polyacrylonitrile. This review also focuses on synthetic methods and performance evaluation.

• 폴리머
• /
• 제39권3호
• /
• pp.461-467
• /
• 2015

본 논문은 ferric p-toluenesulfonate를 산화제에 약 염기인 이미다졸과 poly(ethylene glycol)-poly(propylene glycol)-poly(ethylene glycol) (PEG-PPG-PEG) 계면활성제를 동시 첨가하여 기상중합법으로 제조된 poly(3,4-ethylenedioxythiophene) (PEDOT) 박막의 광-전기적 특성 향상에 대한 것이다. 여러 가지 조건에서 제조된 PEDOT 박막 특성과 산화제의 첨가제로 사용된 약 염기와 계면활성제의 조합 효과의 상관관계를 규명하고자 하였다. 이미다졸과 PEG-PPG-PEG로 구성된 첨가제를 사용하여 제조된 PEDOT 박막은 $1300S{\cdot}cm^{-1}$ 이상의 전도성을 가졌다. PEG-PPG-PEG계 계면활성제의 분자량이 기상 중합을 이용한 PEDOT 박막의 특성에 미치는 영향도 조사하였다.

• Bulletin of the Korean Chemical Society
• /
• 제3권1호
• /
• pp.34-36
• /
• 1982

N-Methacryloyl-L-histidine and N-methacryloyl-L-histidine methyl ester were synthesized and polymerized to obtain polymeric catalysts with different functions. In the presence of each of these polymers the solvolytic reactions of p-nitrophenyl acetate (PNPA), 3-nitro-4-acetoxybenzoic acid(NABA), 3-acetoxy-N-trimethylanilinium iodide(ANTI) and 3-nitro-4-decanoyloxybenzoic acid(NDBA) were performed in 20% aqueous ethanol. For the purpose of comparison the low molecular weight analogs(LMWA's), L-histidine, L-histidine methyl ester and N-acetyl-L-histidine were also subjected to catalyze the solvolyses of above substrates. In the solvolysis of PNPA the polymeric catalysts exhibited lower activities than the LMWA's. However the ionic substrates, NABA and ANTI were solvolyzed at anomalous rate by polymeric catalyst, indicating that electrostatic effects are operative in the catalysis by polymers. Furthermore in the solvolysis of hydrophobic monomer NDBA, polymeric catalysts exhibited highly enhanced activities compared with the LMWA's implying that hydrophobic interaction can be the most important contribution to the high catalytic activity of imidazole-containing polymers.