• Journal of the Korean Society of Radiology
• /
• v.17 no.7
• /
• pp.1165-1170
• /
• 2023

In this study, we aimed to develop a cost-effective neuro-modulation device for use in neuroscientific and clinical medical imaging applications. To achieve this, we designed and fabricated a brain neuro-modulation device with a material cost of less than $500, and subsequently evaluated its performance. The measured performance was found to be comparable to existing medical devices (TENS), with the developed device being compact in size, measuring less than 3 cm by 3 cm. The outcomes of this study are expected to be applicable in accelerating research and development in related fields, as well as in the rapid commercialization of neuro-modulation technology. Furthermore, it is anticipated that this work will contribute to advancements in functional radiological medical imaging technology and enhance accessibility to brain science and brain stimulation technology.

• Journal of radiological science and technology
• /
• v.38 no.4
• /
• pp.389-394
• /
• 2015

There is a progressive development in the medical imaging technology, especially of descriptive capability for anatomical structure of human body thanks to advancement of information technology and medical devices. But however maintenance of correct posture is essential for the medical imaging checkup on the shoulder joint requiring rotation of the upper limb due to the complexity of human body. In the cases of MRI examination, long duration and fixed posture are critical, as failure to comply with them leads to minimal possibility of reproducibility only with the efforts of the examiner and will of the patient. Thus, this study aimed to develop an auxiliary device that enables rotation of the upper limb as well as fixing it at quantitative angles for medical imaging examination capable of providing diagnostic values. An auxiliary device has been developed based on the results of precedent studies, by designing a 3D model with the CATIA software, an engineering application, and producing it with the 3D printer. The printer is Objet350 Connex from Stratasys, and acrylonitrile- butadiene-styrene(ABS) is used as the material of the device. Dimensions are $120{\times}150{\times}190mm$, with the inner diameter of the handle being 125.9 mm. The auxiliary device has 4 components including the body (outside), handle (inside), fixture terminal and the connection part. The body and handle have the gap of 2.1 mm for smooth rotation, while the 360 degree of scales have been etched on the handle so that the angle required for observation may be recorded per patient for traceability and dual examination.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.1
• /
• pp.94-104
• /
• 1997

Most color imaging devices often exhibit color distortions due to the differences in realizable color gamuts and nonlinear characteristics of their components. In order to minimize color differences, it is desirable to apply color correction techniques. Th efirst step of color correction is to select the subset of the color coordinates representing the input color space. Th eselected subset serves as so called color samples to model the color distortion of a given color imaging device. The effectiveness of color correction is determined by the color sampels utilized in the modeling as well as the applied color correction technique. This paper presents a new selection method for color samples based on gentic algorithm. In the proposed method, structure of strings are designed so that the selected color samples fully represent the characteristics of color imaging device and consist of distinct color coordinates. To evaluate the performance of the selected color samples, they ar etuilized for three different color correction experiments. The experimentsal results are comapred with the crresponding results obtianed with the equally spaced color samples.

• Korean Journal of Optics and Photonics
• /
• v.34 no.2
• /
• pp.66-71
• /
• 2023

Zoom lenses are now starting to be applied to mobile-phone cameras as well. A zoom lens applied to a mobile-phone camera is mainly used to capture images in the telephoto range. Such an optical system has a long focal length, similar to that of a high-magnification zoom optical system, so the position of the imaging device also shifts significantly, due to manufacturing errors of the lenses and mechanical parts. In the past, the positional shift of the imaging device was corrected by moving the first lens group and the total optical system, but this paper confirms that the position of the imaging device can be corrected by selecting any two moving lens groups. However, it is found that more distance must be secured in the front and rear of a moving lens group for this purpose.

• Nuclear Medicine and Molecular Imaging
• /
• v.42 no.2
• /
• pp.83-87
• /
• 2008

Diagnostic and functional imaging device have been developed independently. The recognition that combining of these two devices can provide better diagnostic outcomes by fusing anatomical and functional images. The representative examples of combining devices would be PET/CT and SPECT/CT. Development and their applications of animal imaging and instrumentation have been very active, as new drug development with advanced imaging device has been increased. The development of advanced imaging device resulted in researching and developing for detector technology and imaging systems. It also contributed to develop a new software, reconstruction algorithm, correction methods for physical factors, image quantitation, computer simulation, kinetic modeling, dosimetry, and correction for motion artifacts. Recently, development of MRI and PET by combining them together was reported. True integration of MRI and PET has been making the progress and their results were reported. The recent status of imaging and instrumentation in nuclear medicine is reported in this paper.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.355-356
• /
• 2006

The glass transition behavior of OLED materials is very important for both processing and lifetime. We report about the correlation between the structure of selected small molecule Hole Transport Materials (HTM's) and their glass transition temperature. The thermal stability of devices manufactured with them was investigated. The results give researchers and engineers some information which are helpful for designing new molecules and processing them in device making.

• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2640-2645
• /
• 2021

We report the development of a gamma-ray imaging device, named Large-Area Hybrid Gamma Imager (LAHGI), featuring high imaging sensitivity and good imaging resolution over a broad energy range. A hybrid collimation method, which combines mechanical and electronic collimation, is employed for a stable imaging performance based on large-area scintillation detectors for high imaging sensitivity. The system comprises two monolithic position-sensitive NaI(Tl) scintillation detectors with a crystal area of 27 × 27 cm² and a tungsten coded aperture mask with a modified uniformly redundant array (MURA) pattern. The performance of the system was evaluated under several source conditions. The system showed good imaging resolution (i.e., 6.0-8.9° FWHM) for the entire energy range of 59.5-1330 keV considered in the present study. It also showed very high imaging sensitivity, successfully imaging a 253 µCi ¹³⁷Cs source located 15 m away in 1 min; this performance is notable considering that the dose rate at the front surface of the system, due to the existence of the ¹³⁷Cs source, was only 0.003 µSv/h, which corresponds to ~3% of the background level.

• Journal of Biomedical Engineering Research
• /
• v.41 no.4
• /
• pp.165-171
• /
• 2020

In this study, it focuses on the development of radiographic devices for patellar imaging. On the previous X-ray examination of patella and patellofemoral joint, it analyzed the problems which could affect the results: unstable patients' pose, radiation exposure, and deterioration of image quality. The purpose of the research is to propose a future use of a developed device with an explanation of the process, function, and advantage of the device including the methods. The device is developed to focus on the diagnosis of the longitudinal and longitudinal fractures of the patella and patella/femoral joint, displacement such as dislocation, bone formation, stenosis of the patella/femorla joint, and cartilage wear. Due to the patient's anxious posture, it caused a shaking image, overlapping structures, and etcs, these factors challenge to diagnose accurately. In addition, the existing Settegast method and Hughston method, which are most frequently performed in the hospital field, are not suitable for the presence or absence of features or dislocation due to the heavy load on the patella of the patient. The developed device requires patients in a lying position and placing only their leg on the device, it increases the conveniences of the examination and decreases unnecessary radiation exposure of the patient except the patellar examination area. Moreover, one of the systems in the device fixes the detector, where the patients no longer need to hold the detector nor be in unstable posture, but describes the structure of the patella/femoral joint more clearly. Hoping the device will apply to more patients.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.389.1-389.1
• /
• 2016

The flexible solid state device has been widely studied as portable and wearable device applications such as display, sensor and curved circuits. A zero-bias operation without any external power consumption is a highly-demanding feature of semiconductor devices, including optical communication, environment monitoring and digital imaging applications. Moreover, the flexibility of device would give the degree of freedom of transparent electronics. Functional and transparent abrupt p/n junction device has been realized by combining of p-type NiO and n-type ZnO metal oxide semiconductors. The use of a plastic polyethylene terephthalate (PET) film substrate spontaneously allows the flexible feature of the devices. The functional design of p-NiO/n-ZnO metal oxide device provides a high rectifying ratio of 189 to ensure the quality junction quality. This all transparent metal oxide device can be operated without external power supply. The flexible p-NiO/n-ZnO device exhibit substantial photodetection performances of quick response time of $68{\mu}s$. We may suggest an efficient design scheme of flexible and functional metal oxide-based transparent electronics.

• Korean Journal of Digital Imaging in Medicine
• /
• v.12 no.1
• /
• pp.43-50
• /
• 2010

The representative study of Patellofemoral Joint Merchant method can show the view for inspection of the sulcus angle, congruence angle and diagnose whether there are the vertical fractures and recognize the degree of dislocation and patella subluxation. However, anatomical correlation about the degree of knee joint curvature changes during position adjustment and distortion of the image reduces reproducibility. In order to resolve these problems, Merchant method needs to use assisting device which reduces the occurrence of repeat projection and effectively to increase unification of examination and the consistency of the image. However, there are disadvantages for patients who take other examinations. For example, they have to change the position for every examination and it might cause the patient's discomfort and increase of examination time. In this study, we newly devised commercial assisting device which improves the reproducibility of the images and reduces inconvenience of patients movement. Further research should be taken to obtain a image without patient's movement and to reduce the time of the examination than existing method.