• 헤리티지:역사와 과학
• /
• 제57권3호
• /
• pp.24-35
• /
• 2024

최근 의료, 제조, 자율주행, 보안 등 다양한 분야에서 인공지능과 컨볼루션 신경망 등 딥러닝 기술을 활용한 연구들이 활발하게 진행되고 있으며, 사회 전반에 적지 않은 영향을 미치고 있다. 본 연구 또한 이러한 흐름에 맞춰서 고고학 유물 분류에 딥러닝을 활용해 보았다. 즉, 연구는 고고학 조사를 통해 출토된 고대 수막새의 이미지 분류에 딥러닝 기술을 적용하는 초보적 시도로서, 고구려, 백제, 신라 시대의 수막새 이미지를 CNN 모델로 학습시켜 분류를 진행하였다. 고구려, 백제, 신라 수막새 이미지 각각 100장씩 총 300장을 기반으로 기본 데이터셋을 형성하였고, 데이터 증강 기법을 활용하여 4배를 증가시킴으로써 총 1,200장을 데이터셋으로 구축하였다. 사전 훈련된 EfficientNetB0 모델의 전이학습을 통하여 모델을 구축한 후, 5겹 교차검증을 실시한 결과 평균 학습 정확도 98.06%, 검증 정확도 97.08%를 기록하였다. 또한 학습된 모델을 240장의 테스트 데이터셋으로 성능을 평가한 결과, 최소 91% 이상의 높은 정확도로 삼국의 수막새 이미지를 시대별로 구분할 수 있음을 확인하였다. 특히 학습률 0.0001에서 정확도 92.92%, 정밀도 92.96%, 재현율 92.92%, F1 점수 92.93%로 가장 우수한 성능을 보였는데, 이는 다양한 학습률 설정을 통하여 과적합과 과소적합 문제를 방지함과 동시에 최적의 매개변수를 찾는 과정에서 이루어졌다. 본 연구의 결과는 한국 고고학 자료의 분류에 딥러닝 기술 활용 가능성을 확인했다는 점에서 의의가 있다고 생각된다. 또한 기존에 축적·제작된 ImageNet 데이터셋 및 파라미터가 고고 자료 분석에도 긍정적으로 적용할 수 있음을 확인하였다. 이러한 접근은 향후 고고학 데이터베이스 축적이나 활용, 박물관의 유물 분류 및 정리 등 다양한 방식의 모델을 창출할 수 있을 것이다.

• 생물환경조절학회지
• /
• 제32권4호
• /
• pp.434-441
• /
• 2023

식물의 잎의 크기나 면적을 아는 것은 생장을 예측하고 실내 농장의 생산성의 향상에 중요한 요소이다. 본 연구에서는 상추 잎 사진을 이용해 엽장과 엽폭을 예측할 수 있는 CNN기반 모델을 연구하였다. 데이터의 한계와 과적합 문제를 극복하기 위해 콜백 함수를 적용하고, 모델의 일반화 능력을 향상시키기 위해 K겹교차 검증을 사용했다. 또한 데이터 증강을 통한 학습데이터의 다양성을 높이기 위해 image generator를 사용하였다. 모델 성능을 비교하기 위해 VGG16, Resnet152, NASNetMobile 등 사전학습된 모델을 이용하였다. 그 결과 너비 예측에서 R² 값0.9436, RMSE 0.5659를 기록한 NASNetMobile이 가장 높은 성능을 보였으며 길이 예측에서는 R² 값이 0.9537, RMSE가 0.8713로 나타났다. 최종 모델에는 NASNetMobile 아키텍처, RMSprop 옵티마이저, MSE 손실 함수, ELU 활성화함수가 사용되었다. 모델의 학습 시간은 Epoch당평균73분이 소요되었으며, 상추 잎 사진 한 장을 처리하는 데 평균0.29초가 걸렸다. 본 연구는 실내 농장에서 식물의 엽장과 엽폭을 예측하는 CNN 기반 모델을 개발하였고 이를 통해 단순한 이미지 촬영만으로도 식물의 생장 상태를 신속하고 정확하게 평가할 수 있을 것으로 기대된다. 또한 그 결과는 실시간 양액 조절 등의 적절한 농작업 조치를 하는데 활용됨으로써 농장의 생산성 향상과 자원 효율성을 향상시키는데 기여할 것이다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 핵의학기술
• /
• 제14권2호
• /
• pp.38-40
• /
• 2010

이 논문은 먼저 서울대병원 PET/CT 외부 반입 영상 자료의 현황을 파악하고 이를 바탕으로 현재 각 병원 간 전송을 위해 사용되는 PET/CT 영상 자료의 현황과 문제점에 대해 알아보고자 한다. 2010년 1월부터 4월까지 외부 병원에서 의뢰한 PET/CT 영상 판독 의뢰가 있었던 64개 병원을 대상으로 하였다. 각 병원들의 PET/CT 영상 자료에 대해 개별 PET과 CT 영상 자료 제공 여부, PET/CT 융합 영상 제공 여부 등을 조사하였다. 그리고 외래 판독 의뢰가 많았던 병원 상위 5개 병원의 핵의학과 책임자에게 전화를 통한 설문 조사를 실시하였다. 질문 항목은 각 병원 핵의학과에서는 외부 병원 반출용 PET/CT 영상 자료의 구성에 대해 알고 있는지 여부와 핵의학과 자체에서 외부 병원 영상을 처리하는지 여부이다. 서울대병원에 판독이 의뢰된 64개 병원의 PET/CT 영상 CD 자료에 대해 조사하였다. 이 중 횡단면 PET 영상을 제공해준 병원은 조사된 전체 병원의 73%, 횡단면 CT 영상을 제공해준 병원은 조사된 전체 병원의 73%에 불과하였으며 횡단면 융합 영상을 제공해준 병원은 조사된 전체 병원의 77%, MIP 영상을 제공해준 병원은 조사된 전체 병원의 86%였다. 그리고 병원마다 보내는 데이터들이 다 제각각이었다. 어떤 경우는 DICOM 표준형식의 횡단면 PET/CT 영상 등 모든영상이 포함된 경우도 있고 반대로 MIP 영상과 2차원 캡쳐 영상이 없는 경우도 있다. 최소한의 영상을 포함시키는 것도 중요하지만 불필요하게 많은 영상 정보들은 저장 매체의 용량과 영상의 복사 등의 이동 시간에도 비효율적이다. 가장 중요한 DICOM 표준 형식의 횡단면 PET/CT 영상을 전혀 포함하지 않은 병원들을 대상으로 한 전화 설문에서는 핵의학과 자체에서 외부 반출용 PET/CT 영상 자료의 구성에 대해 모르고 있었으며 핵의학 영상 자료를 PACS에 올리고 외부 반출용 영상 CD 제작을 타 부서에서 진행하고 있었다. 현재 각 병원들에서 외부 병원으로 복사하여 보내는 PET/CT 영상 자료 CD는 전체 대상 병원의 27% 이상에서 제한적인 영상만을 포함하고 있어 외부 병원 영상을 받아 환자진료에 이용하는 병원에서는 제한된 영상 정보로 인한 PET/CT 검사의 판독 및 활용 상의 어려움, 재촬영에 따른 추가 의료비 지출이 상당한 문제가 되고 있다. 각 병원들에서 외부 병원으로 보내는 PET/CT 영상 자료에는 최소한 DICOM 표준 형식의 전체 횡단면 PET 영상과 전체 횡단면 CT 영상을 필수적으로 포함시키도록 하고 불필요한 영상을 최소화하는 학회 차원에서의 외부 반출 PET/CT 영상에 대한 가이드라인 마련이 필요하다고 사료된다.

• 핵의학기술
• /
• 제13권3호
• /
• pp.31-42
• /
• 2009

최근 PET/CT가 급격하게 증가하면서 의료기관 사이에 영상의 이동도 증가하고 있다. 이에 서로 다른 의료기관 간의 시스템 별 표준섭취계수 차이를 반영하기 위하여 1 Bed에서 표준섭취계수, 슬라이스 내의 표준섭취계수 변화율과 측정시간에 따른 표준섭취계수를 정량적으로 비교할 수 있는 팬텀을 이용한 비교측정이 필요하다. 본 연구에서는 임상에서 사용하는 다양한 PET/CT 시스템의 표준섭취계수 차이에 대한 연구를 통하여, PET/CT 영상의 표준화섭취계수의 신뢰성을 확보하고자 하였다. 대한민국 전국에 분포되어 의료기관에 설치된 PET/CT 장비 10대를 대상으로 하였으므로, 정확한 방사능 산출을 위하여, 한국표준과학원의 검출기로 검증을 통하여 실험하였다. NEMA PET $Phantom^{TM}$의 내부구조물을 제거하고 $^{18}F$-FDG 1 mCi를 6,000 mL 증류수에 균일하고 분포하도록 마그네틱 스터러와 마그네틱 바의 회전력으로 희석하여, 팬텀에 주입하였다. 주입 후 60분, 70분, 80분, 90분, 100분, 110분, 120분에 3분간 영상을 획득하고, 관심영역 $200\;cm^2$에 대하여 분석하였으며, 유용성 확인을 위하여 임상환자를 대상으로 교정표를 산출하였다. 1 Bed에서 표준섭취계수, 슬라이스 내의 표준섭취계수 변화율, 측정시간에 따른 표준 섭취계수 변화율과 함께 표준섭취계수의 변이계수가 -11.0~9.90%로 국제적으로 통용되는 기준인 ${\pm}10%$를 1개의 장비를 제외하고 모두 만족하였다. 또한, 시스템 별 평균 표준섭쉬계수 차이를 이용하여 0.803~1.246으로 이루어진 교정표를 도출하였고, 정상인을 통한 임상 적용에서 선형회귀분석을 통하여 유의함을 확인하였다. 본 연구를 통하여 PET/CT 장비간의 표준섭취계수 차이를 교정표를 이용하여 정량적으로 비교할 있는 근거를 제시한다면 정확한 진단에 도움이 되며, 아울러 이에 대한 세계적 기준이 명확하지 않기에 유사 연구에 도움이 되리라 사료된다.

• 트랜스-
• /
• 제7권
• /
• pp.19-48
• /
• 2019

본 연구는 대규모 인터뷰 작업을 통해 한민족이 가진 집단적 의식의 지형도를 담아내고자 하는 미디어전시작업 <70mK>의 의미를 고찰하기 위해 기술되었다. <70mK>는 개별 존재자들의 인터뷰 영상들을 마치 모자이크와 같은 배치와 형태로 편집, 구성된 영상전시물을 만들고 전시회를 개최하고 있다. 분할된 프레임 속의 개체들은 저마다의 생각과 개성을 드러내는 차이의 연속성을 보여준다. 이것은 개체들의 내재성이 동시다발적이고 총체적인 이미지로 구현된 공시적이고 의식적인 집단적 타자의 형상이다. 인터뷰 영상들은 실제 존재자로서의 자신의 형태를 드러내고 자신이 가진 특유의 내재성을 구술적인 정보로서 발산한다. <70mK>는 특정 집단이라는 동일선의 연장에서 이런 생명적 개체들의 형태와 정보를 미학적으로 구조화하여 새로운 개체화를 이루어낸다. 프레임 속의 존재자들, 각 개체들은 서로가 대화를 나누거나 소통하는 것이 아니라 카메라를 향한 전면 응시, 즉 작품을 관람하는 사람들을 향해 그들이 가진 전개체적 실재로서의 관계성과 개성을 전달한다. 그것은 각 개체들이 보여주는 이질성과 차이의 반복적 배치와 구성인 동시에 그 이면에 집단적 동일성을 내포한 연쇄 작용이다. <70mK>는 개성을 드러내는 인터뷰이들의 직접적인 이미지와 소리를 구조화하여 전시영상작품이라는 새로운 정보전달 방식의 형태를 이루어낸다. 이러한 점은 정신적이고 집단적인 개체화의 의미와 관개체적인 관계성의 의미와 과정을 은유하게 하고 지각하게 한다. 이것은 개체화라는 생성의 과정과 관계의 의미를 현대 기술과 함께 사유한 질베르 시몽동의 개체화론으로 설명하기 적합한 사례이다. <70mK>가 구축한 전시공간은 특정 집단의 개체들 사이를 관통하여 연결되는 정신적이고 집단적인 의미와 그 관계성을 미학적인 방법론으로 함의하고 있다. 시몽동은 개체화라는 과정에 대한 사유와 생성의 의미를 고찰하며 현대의 기술이 가진 가능성과 잠재력을 긍정한 철학자이다. <70mK>는 현대의 기술 매커니즘과 네트워크적 행위들이 매개되어 구조화되고 생성된 윤리적 실재성으로서의 새로운 개체이다. 그것은 기술이 협업 된 개체화 과정에 인터뷰가 어떻게 '변환' 작용으로 기능하는지에 대한 미학적이고 실천적인 방법론을 보여주는 사례이다. <70mK>가 보여주는 직접적인 이미지와 소리는 생명적 개체의 정보들이 운반, 증폭, 축적되며 발산하는 정보의 체계이자 정신적이고 집단적인 풍경으로서의 새로운 개체이다. 그것은 복수의 개체화를 통해 새롭게 생성된 전시예술작품에 내포된 개체초월적인 의미작용과 과정에 대한 하나의 표상이기도 하다. 개체화된 준안정적 상태로서의 미디어전시예술은 작품을 관람하는 이들이 동일한 전개체적 실재를 인지하고 정념적 감정을 느끼는 새로운 관계 맺기를 이끌어낸다. <70mK>의 전시공간은 의미작용의 표상을 넘어 관개체적 집단의 실질적인 가능성을 예비하는 무대가 된다.

• 한국방사선학회논문지
• /
• 제6권5호
• /
• pp.365-371
• /
• 2012

암환자의 방사선 치료기술은 3D-CRT, IMRT, Tomotherapy로 발전해 가고 있으며 이 3가지의 치료법은 임상에서 가장 많이 쓰이는 방사선 치료기술이다. 본 연구에서는 3D-CRT, IMRT(Linac Based) 그리고 Tomotherapy 치료시 정상조직과 종양조직의 선량분포를 비교해 보고자 한다. 실험방법으로는 조직 등가물질로 이루어진 인체모형팬톰 (Anthropomorphic Phantom)을 대상으로 CT simulation을 실시(Slice Thickness : 3mm)하여 획득된 영상에 GTV를 비인두 부위로 정하고 PTV는 GTV에 2mm정도의 영역을 포함시켜 치료계획용 장비(ADAC-Pinnacle3. Tomotherapy Hi-Art System)으로 전송한다. 치료계획은 PTV의 처방선량을 7020 cGy로 설정한 후 PTV에 부여되는 선량값과 정상조직인 이하선, 구강, 척수에 흡수되는 선량값을 산출하였다. 실험결과 PTV에 분포된 선량값은 Tomotherapy, Linac Based - IMRT, 3D-CRT가 각각 6923 cGy, 6901 cGy, 6718 cGy의 선량분포를 보여 종양조직 처방선량값인 7020 cGy의 95%이상 부여되어 종양제어측면(TCP)에 부합하였으며 정상조직(이하선, 구강, 척수)은 각각 1966 cGy (Tomotherapy), 2405 cGy(IMRT), 2468 cGy(3D-CRT)[이하선], 2991 cGy(Tomotherapy), 3062 cGy(IMRT), 3684 cGy(3D-CRT)[구강], 1768 cGy(Tomotherapy), 2151 cGy(IMRT), 4031 cGy(3D-CRT)[척수]의 선량이 분포되었으며 이는 정상조직 합병증발생율(NTCP)의 선량을 넘지 않았다. 모든 치료기법에서 종양조직과 정상조직이 선량분포측면에 부합하였다. 3D-CRT의 치료법이 선량분포 면에서 가장 양호하지 않았지만 종양조직제어율(TCP)과 정상조직합병증율(NTCP)을 고려해 볼 때 기준치를 벗어나지 않는 선량이 분포 되었다. 상대적으로 선량분포가 우수한 Tomotherapy, IMRT는 오랜 치료시간 때문에 폐쇄공포증환자나 호흡불량 환자가 치료받는데 어려울 수 있다. 특히 토모테라피의 경우 치료 전에 고에너지 컴퓨터 단층촬영을 매일 실시하기 때문에 불필요한 방사선 피폭을 초래할 수 있다. 결론적으로 Tomotherapy가 선량분포에서 가장 우수한 치료기법으로 평가되었으며, IMRT, 3D-CRT의 순으로 방사선치료의 적합성을 보였다. 하지만 실제 치료시 환자의 상태에 따라 제한적으로 3차원 입체조형치료를 시행하여도 무방하다고 사료된다.

• 대한공업교육학회지
• /
• 제34권1호
• /
• pp.87-112
• /
• 2009

이 연구의 목적은 방송 산업 분야의 특성화고등학교로 전환을 위한 S특성화 방송고등학교의 실험 실습실 재구조 방안과 리모델링 모형 및 방향을 제시하는 것이다. 각 과별로 실험 실습실 재구조 방안은 첫째, 각 전공별로 개편할 실습실명과 평면도 및 투시도를 구성주의 철학에 맞도록 재구성 설계하였다.둘째, 과별로 주요 실험 실습실 개편에서 방송기계과에서는 방송무대기계실습실, 방송기계요소가공실, 방송기계설비실습실, 영상기계실습실 등, 방송전기통신과에서는 영상 음향편집실, 방송통신설비실, 방송시스템실습실, 무대조명실습실 등, 방송무대건축과에는 방송무대제작실습실, 방송무대디자인 실습실, 방송무대장식실습실 등 각과별로 7실을 제안하였다. 셋째, 과별 사무실을 세미나실로 배치하였고, 각 실습장은 전공별 전담제로 실습실 관리 및 연구실화하는 방향으로 설계하였다. 넷째, 과별로 산학협력실을 설치하여 외부의 기업체가 입주시켜 산학협력교육이 원활하게 이루어 질 수 있도록 산학 연계 교육의 장으로 구상하였다. 그리고 각 과별로 실험 실습장 1실에 대하여 개편 실습실명, 평면도 및 투시도, 실습실 운용 방안 등을 예를 들어 제시하였다. 특히 방송 관련 실험 실습실 운영을 효율적으로 하기 위해서는 산학겸임교사 활용, 방송기술관련 전문 동아리, 학교내 기업 유치 등을 중요한 요인으로 제시하였다. 끝으로 방송 산업 분야의 특성화고등학교로 성공하기 위한 실험 실습실 리모델링 및 장비 구입에 많이 예산이 소요되는 분야이므로 '민간자본유치사업(BTL)'을 유치하는 것도 바람직하다.

• 한국식품영양과학회지
• /
• 제34권5호
• /
• pp.667-673
• /
• 2005

본 연구에서는 국내 패밀리 레스토랑 업체를 대상으로 변혁적 리더십과 서비스리더십에 대한 선호도를 조사하고, 서비스 리더십의 수준에 따른 종업원의 만족도를 살펴보고 효과적인 리더십의 유형을 모색하고자 하였다. 본 연구 결과에 의하면 리더십의 선호도에 있어서는 변혁적 리더십의 선호도$(25\%)$보다 서비스리더십에 대한 선호도$(75\%)$가 높은 것으로 나타났다. 가설 2의 검증에 있어서 서비스 리더십 수준이 높은 집단의 종업원 만족도가 서비스 리더십 수준이 낮은 집단의 종업원 만족도보다 높을 것이라는 가설이 채택되었다. 이는 직무만족의 3가지 구성요소에 있어서, 그리고 종합적인 만족점수에 있어서도 유의적(p<0.001)인 차이를 나타내 서비스리더십의 수준이 높은 집단이 낮은 집단보다 직무만족이 높음을 알 수 있었다. 또한 서비스리더십의 구성 요소인 서비스 신념, 태도, 능력, 통찰력이 종업원의 만족도에 양의 상관관계가 있을 것이라는 가설이 지지되었다. 또한 서비스리더십의 선호집단과 변혁적 리더십의 선호집단에 있어서 종업원의 만족도가 차이가 있을 것이라는 가설은 채택되지 않았는데, 이는 리더십의 선호도에 있어서 $75\%$의 패밀리 레스토랑의 종사원이 서비스 리더십을 선호한다고 응답하여 높게 나타났고, 선호하는 리더십과 실제로 수행되고 있는 리더십에 있어서는 차이가 있기 때문일 것이라고 추정된다. 본 연구는 현재 서비스 기업의 엄청난 부가가치의 생산과 더불어 그 중요성이 부각되고 있는데, 무형적인 가치의 제공과 고객과의 접점에서 즉각적으로 제공되는 서비스의 특성을 고려한 서비스리더십에 대한 이론을 고찰하고, 이것이 패밀리레스토랑에 적용가능성 타진해 봄으로써 효과적인 리더십을 돌출했다는 것에 의의를 둘 수 있다. 그러나 서비스리더십의 이론에 대한 심층적인 연구가 부족하고, 실제로 검증해본 연구들이 양적으로 적어서 일반화의 과정에 있어서는 아직 한계를 가지고 있다. 따라서 앞으로의 후속 연구에 있어서 이론의 논리적 구성에 대한 검증과 외식업체에서 다양한 직무를 수행하고 있는 종사원을 대상으로 적용해보는 실증 연구가 필요할 것으로 사료된다.