• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.4
• /
• pp.863-872
• /
• 2015

Kernel rootkit is recognized as one of the most severe and widespread threats to corrupt the integrity of an operating system. Without an external monitor as a root of trust, it is not easy to detect kernel rootkits which can intercept and modify communications at the interfaces between operating system components. To provide such a monitor isolated from an operating system that can be compromised, most existing solutions are based on external hardware. Unlike those solutions, we develop a kernel introspection system based on the ARM TrustZone technology without incurring extra hardware cost, which can provide a secure memory space in isolation from the rest of the system. We particularly use a secure timer to implement an autonomous switch between secure and non-secure modes. To ensure integrity of reference, this system measured reference from vmlinux which is a kernel original image. In addition, the flexibility of monitoring block size can be configured for efficient kernel introspection system. The experimental results show that a secure kernel introspection system is provided without incurring any significant performance penalty (maximum 6% decrease in execution time compared with the normal operating system).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.3815-3821
• /
• 2012

The LCD frame is an important part which supports the BLU of medium/large sized TFT-LCD. To produce it efficiently, it is necessary to achieve the molding process improvement from 1 cavity to 2 cavity system. Because 2 cavity mold is compact and its hot-runner zone is broadened, it is difficult to control the temperature on the mold. In this study, injection molding analysis on the frame in 2 cavity process with FEA(Finite Element Analysis) software is carried out to estimate its quality. The calculated injection molding pressures and maximum deflection in 1 and 2 cavity processes are 41.13 MPa and 1.62 mm, 40.49 MPa and 1.66 mm respectively. The measured maximum flexure load and surface roughness of the left and right frame of 2 cavities are 209 N and 0.08 ${\mu}m$, 193 N and 0.10 ${\mu}m$ while those in 1 cavity are 140 N and 0.13 ${\mu}m$. Thermal image shows that the maximum standard deviation of the temperature on left and right side of 2 cavity mold is $1.23^{\circ}C$. The simulation and measurement results show that the quality of the frame in 2 cavity injection molding process as a whole is not worse than that of 1 cavity system. But maximum flexure loads of the frame in 2 cavity process are far greater than that in 1 cavity process.

• Journal of radiological science and technology
• /
• v.30 no.2
• /
• pp.121-127
• /
• 2007

The purpose of this study was to examine the indirect estimation of the lumbar intervertebral disc size by two anthropometric methods(Colombini's method and Turk and Celan's method), in order to compare these indirect methods with the direct analysis by computed tomography(CT). The wrist, elbow, knee and ankle joint(right side) diameters were measured in 52 normal volunteers and intervertebral disc sizes were measured in 50 normal subjects by CT. Then the intervertebral disc sizes were calculated using two anthropometric formula. The data were analysed with ANOVA to differentiation between indirect and direct estimation of the lumbar intervertebral disc sizes. This study shows that male subjects have significantly larger L4-5 and L5-S1 intervertebral disc sizes than female subjects. In addition, disc sizes calculated by Colombini's formula were significantly larger than Turk & Celan's formula but there was no significant differences in the compared Turk & Celan's estimation with CT values. The indirect estimation of the intervertebral disc size by Turk & Celan's formula can be considered as a clinically useful method. However, further study should be conducted to compare anthropometric values according to age.

• Journal of radiological science and technology
• /
• v.36 no.3
• /
• pp.193-200
• /
• 2013

There are many concerns about radiation exposure in Korea after Fukushima Nuclear Plant Accident on 2011 in Japan. As some isotope materials are detected in Korea, people get worried about the radioactive material. In addition, the mass media create an air of anxiety that jump on the people's fear instead of scientific approach. Therefore, for curbing this flow, health, medical institute from the world provide a variety of information about medical radiation safety and hold the campaign which can give people the image that medical radiation is safe. At this, the Korean Food and Drug Administration(KFDA) suggested that make the alliance of medical radiation safety and culture on August, 2011. Seven societies and institutions related medical radiation started to research and advertise the culture of medical radiation safety in Korea. In this report, mainly introduce the activities of the Korean Alliance for Radiation Safety and Culture in Medicine(KARSM) for spreading culture of medical radiation safety from 2011 to 2012.

• Korean Journal of Remote Sensing
• /
• v.27 no.1
• /
• pp.33-41
• /
• 2011

In the information communication technology, it is world-widely apparent that trend movement from internet web to smartphone app by users demand and developers environment. So it needs kinds of appropriate technological responses from geo-spatial domain regarding this trend. However, most cases in the smartphone app are the map service and location recognition service, and uses of geo-spatial contents are somewhat on the limited level or on the prototype developing stage. In this study, app for extraction of corner point features using geo-spatial imagery and their linkage to database system are developed. Corner extraction is based on Harris algorithm, and all processing modules in database server, application server, and client interface composing app are designed and implemented based on open source. Extracted corner points are applied LOD(Level of Details) process to optimize on display panel. Additional useful function is provided that geo-spatial imagery can be superimposed with the digital map in the same area. It is expected that this app can be utilized to automatic establishment of POI (Point of Interests) or point-based land change detection purposes.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_1
• /
• pp.735-747
• /
• 2020

Recent advanced UAV (Unmanned Aerial Vehicle) technology supply new opportunities for estimating crop condition using high resolution imagery. We analyzed the diurnal change of reflectance and NDVI (Normalized Difference Vegetation Index) in UAV imagery for crop monitoring in clear day condition. Multi-spectral images were obtained from a 5-band multi-spectral camera mounted on rotary wing UAV. Reflectance were derived by the direct method using down-welling irradiance measurement. Reflectance using UAV imagery on calibration tarp, concrete and crop experimental sites did not show stable by time and daily reproducible values. But the CV (Coefficient of Variation) of diurnal NDVI on crop experimental sites was less than 5%. As a result of comparing NDVI at the similar time for two day, the daily mean average ratio of error showed a difference of 0.62 to 3.97%. Therefore, it is considered that NDVI using UAV imagery can be used for time series crop monitoring.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.3
• /
• pp.326-333
• /
• 2015

A tidal sandshoal, called 'Puldeung' in the Daeijackdo Marine Protected Area(DMPA), is facing erosion due to sand mining in the nearby coastal region. To monitor the morphologic change and erosion of Puldeung, a camera monitoring system was established at the top of Song-Ee Mountain in Daeijack Island. The system consists of 2 Cannon digital cameras, Eye-fi memory card/Long-Term Evolution wireless network, and solar power supply. The acquired camera images were analyzed to obtain the area of Puldeung by the following methods: geometric correction of image, identification of shoreline, areal measurement of Puldeung and its error estimation. To compare the Puldeung area with previously measured area of 1.79 km2 at tidal height of 137 cm in 2008 and of 1.59 km2 at tidal height of 148 cm in 2010, we selected images with same tidal heights. The Puldeung area was 1.37 and 1.23 km2 at the tidal height of 137 and 148 cm, respectively. The erosion at DMPA is very severe and thus it is imperative to initiate the morphodynamical study on the seasonal variation and long-term evolution of Puldeung as well as the causes and measures of Puldeung erosion.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.11
• /
• pp.1005-1013
• /
• 2010

This study was conducted to assess the spray control of flash boiling with mixed fuel in consideration of HCCI (Homogeneous Charge Compression Ignition) engine condition. Mixed fuel existing in two phase regions can control the process of mixture formation under low temperature and density by using the spray resulting from flash boiling which is able to induce rapid evaporation of fuel spray as well as the evaporation of high boiling point component. Because HCCI engine injects the fuel early under ambient conditions, it can facilitate the chemical control of ignition combustion and physical control such as breakup and atomization of liquid fuel by flash boiling of mixed fuel which consists of highly ignitable light oil and highly volatile gasoline. This study was conducted by performing video processing after selected composition and molar fraction of the mixed fuel as major parameters and photographed Schlieren image and Mie scattered light corresponding to the flash boiling phenomenon of the fuel spray that was injected inside a constant volume vessel. It was found that flash boiling causes significant changes in the spray structure under relatively low temperature and density. Thus, we analyzed that the flash boiling spray can be used for HCCI combustion by controlling the mixture formation at the early fuel injection timing.

• Journal of the Korean Society for Library and Information Science
• /
• v.42 no.3
• /
• pp.61-79
• /
• 2008

The purpose of this paper is to investigate the three aspects of the construction and common use of old document DB in the foreign countries: i) the processing of old documents, ii) the problem and improvement of DB systems of old documents. and iii) the common use of old document DB. Results from this research are as follows: The National Library of Korea(NLK) copied old documents in the foreign countries from 1982 to 2006 and published the brief catalog. The Reogang Publishing company issued four volumes catalogs of old document in Japan. The National Research Institute of Cultural Heritage(NRICH) investigated old books and published some catalogs of several organizations in Japan. America. France. and all. The National Institute of Korean History(NIKH) investigated old archives and published some catalogs of several organizations in Japan. The characteristics of the Korean Old and Rare Collection Information System(KORCIS) of the NLK, the Old Books Cultural Heritage in Overseas System of the NRICH. and the Korea History DB System and MF Catalog/ Image System of NIKH were described in the DB systems of old documents, the problems of DB systems were checked over and some alternatives were suggested. In the common use of old document DB, KORMARC format and description rules(draft) for archives should be revised to adopt a new standard such as KS editions. and all the institutes involved should thoroughly follow the standards. when creating bibliographic records and digitizing texts. It is necessary to educate and train the specialists of old documents. A government organization should be established to supervise all the procedures of developing technology for sharing digitized resources. using contents. and cooperating with the related internationl organizations and institutes.

• Cartoon and Animation Studies
• /
• s.13
• /
• pp.255-267
• /
• 2008

Recently in the field of information design use of multimedia Including animation has been rapidly increased. And its application is expanding in the field of design nevertheless relevant research in this field is scant. In particular research on which characteristics contribute to improvement for effect of information communication is negligible. Until now designers' interest was mainly focused on visual perfection of screen such as diversity and originality. Actually the aspect of recognition of design was mostly overlooked. But considering ultimate purpose of Information design is accurate communication of information thus there should be more endeavor for research on man's visual recognitive faculty and memory in order to Improve power of communication of information for the purpose of reducing confusion of user before its originality and diversity. For this reason this author in this treatise attempted to examine possible impact of multimedia in information design on recognition of user and communication based on theory of effectiveness of media and also attempted to identify how maximize its effect under different circumstances. Theories on effectiveness of media can be summed up as that well- advanced information of multimedia should be analysed from diverse standpoints on relevancy to tasks and recognitive relevancy rather than its simplification from the standpoint of richness of media. For optimal interface design unnecessary recognitive load should be eliminated and information should be structured by laking maximum advantage of working memory of limited quantity. Also there will be need for selection of proper media and suggestion of expressive method to enable building accurate and successful mental image. In this treatise this author attempted to contribute to designer's decision making in future through examining theories on effectiveness of media in connection with the question of which information technology should be used in order to heighten effect of information communication appropriate to information design.