• Transactions of Materials Processing
• /
• v.11 no.7
• /
• pp.620-627
• /
• 2002

The purpose of this paper is the development of an automated measurement system for micro spring based on the digital image processing technique. This micro spring can be used in various engineering applications such as filament, load bearing springs, hard disk suspension and many others. Main functionality of the micro spring inspection system is to measure the representative pitch of the micro spring. The derivative operators are used for edge detection in gray level image. Measurement system developed in this paper consisted of new auto feeding mechanism to take advantage of air pressure. In the process of development of the micro spring inspection system based on the image processing and analysis, strong background technology and know-how have been accumulated to measure micro mechanical parts.

• ETRI Journal
• /
• v.37 no.6
• /
• pp.1251-1258
• /
• 2015

We investigate an image recovery method for sparse-view computed tomography (CT) using an iterative shrinkage algorithm based on a second-order approach. The two-step iterative shrinkage-thresholding (TwIST) algorithm including a total variation regularization technique is elucidated to be more robust than other first-order methods; it enables a perfect restoration of an original image even if given only a few projection views of a parallel-beam geometry. We find that the incoherency of a projection system matrix in CT geometry sufficiently satisfies the exact reconstruction principle even when the matrix itself has a large condition number. Image reconstruction from fan-beam CT can be well carried out, but the retrieval performance is very low when compared to a parallel-beam geometry. This is considered to be due to the matrix complexity of the projection geometry. We also evaluate the image retrieval performance of the TwIST algorithm -sing measured projection data.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.2
• /
• pp.180-187
• /
• 2007

In this paper, we propose an automatic method which combines two or more images acquired by camera on the air-vehicle into a larger image mosaics. The shift, scaling, rotation factors between two images can be calculated by using the correspondences between the points of the images. In order to estimate these factors, we find the relative positions of two images with respect to each other by using the SIFT descriptor and the RANSAC algorithm. After estimating the factors, the images can be merged into a single image mosaic by warping the target image. To avoid seams when mosaics are constructed from overlapped images, we apply the average gray level value of points within a overlapped zone. We have tested our proposed method on various image sets and have confirmed that our method produced good result subjectively.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.1
• /
• pp.147-155
• /
• 2010

Landcover information of access-denied area was extracted from low-medium and high resolution satellite image. Training for supervised classification was performed to refer visually by landcover map which is made and distributed from The Ministry of Environment. The classification result was compared by relating data of FACC land classification system. As we rasterize digital military map with same pixel size of satellite classification, the accuracy test was performed by image to image method. In vegetation case, ancillary data such as NDVI and image for seasons are going to improve accuracy. FACC code of FDB need to recognize the properties which can be automated.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.5
• /
• pp.455-461
• /
• 2009

In a scanning electron microscopy, image distortion is a critical issue and it is needed to be eliminated by some kinds of schemes. In this work, scanning frequency and scanning wave form are adjusted to have an improved image. The relationship between scan coil and its driver is investigated and appropriate frequency and wave form are suggested. It is proved that the selected frequency and wave form showed an enhanced image with less distortion, which were done by experiments. In addition, a noise elimination is addressed, providing improved image with a GROUND signal integration with the amplifier and the scan driver.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.1
• /
• pp.76-84
• /
• 2012

This paper presents the measurement system of arrow's point of impact using laser scan camera and describes the image calibration method. The calibration process of distorted image is primarily divided into explicit and implicit method. Explicit method focuses on direct optical property using physical camera and its parameter adjustment functionality, while implicit method relies on a calibration plate which assumed relations between image pixels and target positions. To find the relations of image and target position in implicit method, we proposed the performance criteria based polynomial theorem model that overcome some limitations of conventional image calibration model such as over-fitting problem. The proposed method can be verified with 2D position of arrow that were taken by SICK Ranger-D50 laser scan camera.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.1
• /
• pp.113-118
• /
• 2011

This paper proposes computer visual inspection algorithms for PCB defects which are found in a manufacturing process. The proposed method can detect open circuit and short circuit on bare PCB without using any reference images. It performs adaptive threshold processing for the ROI (Region of Interest) of a target image, median filtering to remove noises, and then analyzes connected components of the binary image. In this paper, the connected components of circuit pattern are defined as 6 types. The proposed method classifies the connected components of the target image into 6 types, and determines an unclassified component as a defect of the circuit. The analysis of the original target image detects open circuits, while the analysis of the complement image finds short circuits. The machine vision inspection system is implemented using C language in an embedded Linux system for a high-speed real-time image processing. Experiment results show that the proposed algorithms are quite successful.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.3
• /
• pp.59-64
• /
• 2013

Accurate and robust image registration is important task in many applications such as image retrieval and computer vision. To perform the image registration, essential required steps are needed in the process: feature detection, extraction, matching, and reconstruction of image. In the process of these function, feature extraction not only plays a key role, but also have a big effect on its performance. There are two representative algorithms for extracting image features, which are scale invariant feature transform (SIFT) and speeded up robust feature (SURF). In this paper, we present and evaluate two methods, focusing on comparative analysis of the performance. Experiments for accurate and robust feature detection are shown on various environments such like scale changes, rotation and affine transformation. Experimental trials revealed that SURF algorithm exhibited a significant result in both extracting feature points and matching time, compared to SIFT method.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.2
• /
• pp.88-91
• /
• 2020

Image segmentation is the task of partitioning an image into multiple sets of pixels based on some characteristics. The objective is to simplify the image into a representation that is more meaningful and easier to analyze. In this paper, we apply deep-learning to pre-train the learning model, and implement an algorithm that performs image segmentation in real time by extracting frames for the stream input from the Android device. Based on the open source of DeepLab-v3+ implemented in Tensorflow, some convolution filters are modified to improve real-time operation on the Android platform.

• Journal of the Korean Society of Safety
• /
• v.17 no.4
• /
• pp.11-18
• /
• 2002

We proposed a new experimental method which is required to easily observe the growth behavior of fatigue cracks. In the proposed method, the image data of cracks were stored into the computer while the cyclic loading was interrupted. After testing, crack length was determined using an image processing software which was developed by authors. By comparing the data measured by the image processing system with those by the manual measurement with a microscope, the effectiveness of the image processing system was established. If the proposed method is used to monitor and observe the crack growth behavior automatically, the time and efforts for fatigue test could be dramatically reduced.