• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.8
• /
• pp.1-7
• /
• 1993

This paper proposed an algorithm that extracts the optimum characteristics parameters to identify the signatures from the spectrum using 2-D FFT. The signature image input through a scanner is normalized into 250*128 pixels in the prepocessor. Normalized image is divided into block segments and each segment is transformed into space spectrum by 2-d FFT. There are several methods extracting the signature characteristic parameters from that spectrum. The result of experimentations which use the characteristic parameters extracted between $0^{\circ}and\;90^{\circ}$ in (0, 0), (63, 0) corners from 64$\times$64 block spectrum shows that the signature identification rate using that method gives 92.5% of successful achievement for 100 signatures, higher than the others.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.24 no.1
• /
• pp.23-34
• /
• 2006

Color reproduction is one of the most important expression factors in digital printing. In this paper, an experiment was done where the characteristics of color reproduction in digital printing. The results could summarized as follows. The printing used device profile showed a color difference of less than printing used default value in digital printing. As a result of weighting color difference, a difference between color gamut of digital original and color gamut of printing, when transforming the RGB color space to CMY color space, a exclusion the gray revision. The solution is to optimize the color transformation by gamut mapping and gray revision.

• International Journal of Aeronautical and Space Sciences
• /
• v.2 no.1
• /
• pp.103-109
• /
• 2001

Productivity enhancement program of wind tunnel testing has begun at Korea Aerospace Research Institute Low Speed Wind Tunnel (KARI LSWT). A previous test record of a canard airplane model was adopted to examine the current status of wind tunnel testing efficiency. The time consumed to perform testing activities from the model preparation to data collection was broken down and the results were compared with those of the recent Boeing low speed test result. The efforts to improve the wind tunnel productivity consisted of the installation of mini crane underneath of test section, fabricating lift device for image fairings, model configuration changing rigs and the modifications of external balance system. Time reductions for changing strut interface platform and installation of image fairings. These effects showed more than 70% improvement over the previous test time. Integration of the new and modified systems will improve productivity of wind tunnel testing in KARI LSWT.

• International Journal of Aeronautical and Space Sciences
• /
• v.1 no.2
• /
• pp.68-74
• /
• 2000

A comparative wind tunnel testing of an airplane model was performed at the Korea Aerospace Research Institute Low Speed Wind tunnel(KARI LSWT). The model used for the comparative test was a seaplane model from the Glenn L. Martin Wind(GLM) Tunnel of University of Maryland, U.S.A. The 6-component external balance used in force and moment measurement is pyramidal type, which is a precision device that has strain gauge-type load cell inside of balance and the virtual center of the balance coincides with the tunnel centerline. Image method is adopted to eliminate the tare and interference of the model support, and to correct the flow angularity to the model also. Test results from KARI LSWT were compared with the results from GLM tunnel.

• International Journal of Aeronautical and Space Sciences
• /
• v.4 no.1
• /
• pp.19-25
• /
• 2003

A low speed wind tunnel test for the canard airplane model was conducted in KARI LSWT. To measure the required level of accuracy, the image system was applied for all elevator deflection and different canard incidence conditions. By doing so, the difference in aerodynamic characteristics between the forward swept and straight canards can be precisely evaluated, and the pros and cons of both canards arrangements can be discussed. Compared with both canard configurations at the same incidence angle setting, the straight canard has benefits in lift and drag, and the slope of pitching moment increases more moderately than the forward swept canard. The listed data and discussion would be useful to whom wants to design a canard airplane.

• Journal of the Korean Society of Industry Convergence
• /
• v.10 no.1
• /
• pp.55-63
• /
• 2007

The purpose of this study is to extract the main planning factors of environment friendly apartment complex through the residents' evaluations on importance levels of the planning factors. The major findings of this study are as follows; 1) Understanding on the environment friendly apartment complex is lacking, and the satisfaction level on the living space as the environment friendly apartment is very low. 2) The residents in the low-storied apartments want the introduction of facilities for energy saving, and those in the high-storied apartments demand to develop to green area. 3) In evaluating the importance of the environment friendly planning factors and the image of the apartment complex, the guarantee of green area and the development of water friendly space are closely related with the image of the apartment complex. So, they are the planning factors that should be handled importantly.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.1
• /
• pp.40-47
• /
• 2010

This paper presents a simultaneous localization and mapping (SLAM) of an indoor hallway environment using Rao-Blackwellized particle filter (RBPF) along with a line segment as a landmark. Based on the fact that fluent line features can be extracted around the ceiling and side walls of hallway using vision sensor, a horizontal line segment is extracted from an edge image using Hough transform and is also tracked continuously by an optical flow method. A successive observation of a line segment gives initial state of the line in 3D space. For data association, registered feature and observed feature are matched in image space through a degree of overlap, an orientation of line, and a distance between two lines. Experiments show that a compact environmental map can be constructed with small number of horizontal line features in real-time.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2004.11a
• /
• pp.112-115
• /
• 2004

Avante-garde arts which are still being continued until now has become not only just a forefather of art, but also the tradition of modern arts which are still being held on. Rem Koolhaas is growing his reputation as an architect like Le Corbuster. Space image and related documents analysis and characteristic interior image analysis rather than whole concept or the structure analysis, which first, making a analysis tool from derived characteristics from theoretical guidance of avante-garde and then by deriving characteristics of avante-garde arts from space consists of Rem Koolhaas, was able to identify that in his work consists contained characteristics of avante-garde arts

• Journal of Information Processing Systems
• /
• v.9 no.4
• /
• pp.621-632
• /
• 2013

The most important things for a forest fire detection system are the exact extraction of the smoke from image and being able to clearly distinguish the smoke from those with similar qualities, such as clouds and fog. This research presents an intelligent forest fire detection algorithm via image processing by using the Gaussian Mixture model (GMM), which can be applied to detect smoke at the earliest time possible in a forest. GMMs are usually addressed by making the model adaptive so that its parameters can track changing illuminations and by making the model more complex so that it can represent multimodal backgrounds more accurately for smoke plume segmentation in the forest. Also, in this paper, we suggest a way to classify the smoke plumes via a feature extraction using HSL(Hue, Saturation and Lightness or Luminanace) color space analysis.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.3
• /
• pp.245-250
• /
• 2010

In this paper, an efficient extraction technique of power lines is proposed. Power line extraction technique is used to operate unmanned autonomous vehicles. To achieve the extraction of power lines, an angle space segmentation and grouping method of Hough transform are developed. In simulation results for the proposed algorithm, our algorithm shows a good detection results in experiments for several aerial images which contain different line components.