• Journal of Navigation and Port Research
• /
• v.40 no.4
• /
• pp.207-212
• /
• 2016

The box-counting(BC) method is one of the most commonly used methods for fractal dimension calculation of binary images in the fields of Engineering, Science, Medical Science, Geology, etc due to its simplicity and reliability. It deals with only square images with each size equal to the power of 2 to prevent it from discarding unused pixels for images of arbitrary size. In this paper, we presents a more efficient BC method based on the original one, which is applicable to images of arbitrary size. The proposed approach allows the number of the counting boxes to be real to improve the estimation accuracy. The mean absolute error performance is computed on two deterministic fractal images whose theoretical dimensions are well known to compare with those of the existing BC method and triangular BC method. The experimental results show that the proposed method can outperform the two methods and assess the complexity of coastline images of Korea and Chodo island taken from the Google map.

• Geophysics and Geophysical Exploration
• /
• v.21 no.1
• /
• pp.15-25
• /
• 2018

Seismic inversion is a high-resolution tool to delineate the subsurface structures which may contain oil or gas. On the other hand, marine controlled-source electromagnetic (mCSEM) inversion can be a direct tool to indicate hydrocarbon. Thus, the joint inversion using both EM and seismic data together not only reduces the uncertainties but also takes advantage of both data simultaneously. In this paper, we have developed a simultaneous joint inversion approach for the direct estimation of reservoir petrophysical parameters, by linking electromagnetic and seismic data through rock physics model. A cross-gradient constraint is used to enhance the resolution of the inversion image and the maximum likelihood principle is applied to the relative weighting factor which controls the balance between two disparate data. By applying the developed algorithm to the synthetic model simulating the simplified gas field, we could confirm that the high-resolution images of petrophysical parameters can be obtained. However, from the other test using the synthetic model simulating an anticline reservoir, we noticed that the joint inversion produced different images depending on the model constraint used. Therefore, we modified the algorithm which has different model weighting matrix depending on the type of model parameters. Smoothness constraint and Marquardt-Levenberg constraint were applied to the water-saturation and porosity, respectively. When the improved algorithm is applied to the anticline model again, reliable porosity and water-saturation of reservoir were obtained. The inversion results indicate that the developed joint inversion algorithm can be contributed to the calculation of the accurate oil and gas reserves directly.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.183-183
• /
• 2017

In the early part of rice growth, root volume primarily limits the amount of plant-accessible nitrogen (N). Therefore, knowledge of the root development is important for modeling N uptake of rice. The timing when the volume of rhizosphere cover the whole soil is also important to carry out timely top dressing. However, information about initial root expansion and associated N uptake is limited due to intrinsic technical difficulties in assessing below-ground processes. Some studies, however, showed a close relationship between below-ground root and above-ground leaf development, suggesting a possibility that above-ground attributes could serve as surrogates for the root processes. In this study, we investigated the relationship between below-ground and above-ground development of rice. Field experiments were conducted where we cultivated Koshihikari (a leading cultivar in Japan) for four different cropping schedules in 2012. In 2016, Gimbozu (HEG4) and three flowering time mutant lines of Gimbozu (X61 (se13), HS276 (ef7), DMG9 (se13, ef7)) were examined for a single season. Experiments were performed with three replications in a completely randomized design. We monitored ammonium-N concentration ([NH4+-N]) in soil solution by repeatedly taking samples from a porous tubing (10-cm long) vertically inserted at the most distant point from surrounding rice hills. Samples were taken in triplicate (= triplicate tubes) and every three days from transplanting in each experimental unit. For above-ground attributes, leaf area index (LAI) was measured in 2012, whereas soil coverage ratio was estimated by image processing in 2016. Results showed that [NH4+-N] increased gradually after transplanting and then rapidly decreased from a certain day. This distinct drop in [NH4+-N] informed us the timing at which the rice root system reached the point of porous tubing and thus essentially covered the whole soil volume. The LAI at the dropping point was about 0.43 regardless of the cropping schedules in 2012 experiment. In 2016, the coverage ratio at the N dropping point was within the range of 0.12 to 0.19 for four genotypes having different growth durations. In addition, the coverage ratios at seven weeks after the transplanting showed a good correspondence to LAI across the four genotypes. We therefore conclude that both LAI and coverage ratio may serve as robust indicators for root development and might be useful to estimate the timing when the root system fully cover the soil volume. Results obtained here will also contribute to develop models that can predict not only above-ground canopy development but also associated below-ground processes.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.220-223
• /
• 2008

A camera system for the satellite application performs the mission of observation by measuring radiated light energy from the target on the earth. As a development stage of the system, the signal level analysis by estimating the number of electron collected in a pixel of an applied CCD is a basic tool for the performance analysis like SNR as well as the data path design of focal plane electronic. In this paper, two methods are presented for the calculation of the number of electrons for signal level analysis. One method is a quantitative assessment based on the CCD characteristics and design parameters of optical module of the system itself in which optical module works for concentrating the light energy onto the focal plane where CCD is located to convert light energy into electrical signal. The other method compares the design\ parameters of the system such as quantum efficiency, focal length and the aperture size of the optics in comparison with existing camera system in orbit. By this way, relative count of electrons to the existing camera system is estimated. The number of electrons, as signal level of the camera system, calculated by described methods is used to design input circuits of AD converter for interfacing the image signal coming from the CCD module in the focal plane electronics. This number is also used for the analysis of the signal level of the CCD output which is critical parameter to design data path between CCD and A/D converter. The FPE(Focal Plane Electronics) designer should decide whether the dividing-circuit is necessary or not between them from the analysis. If it is necessary, the optimized dividing factor of the level should be implemented. This paper describes the analysis of the electron count of a camera system for a satellite application and then of the signal level for the interface design between CCD and A/D converter using two methods. One is a quantitative assessment based on the design parameters of the camera system, the other method compares the design parameters in comparison with those of the existing camera system in orbit for relative counting of the electrons and the signal level estimation. Chapter 2 describes the radiometry of the camera system of a satellite application to show equations for electron counting, Chapter 3 describes a camera system briefly to explain the data flow of imagery information from CCD and Chapter 4 explains the two methods for the analysis of the number of electrons and the signal level. Then conclusion is made in chapter 5.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.2
• /
• pp.185-196
• /
• 1997

By considering the definition and application of resolution as well as the concept and theory of SAR, the essential contents of the SAR design and analysis are described. This paper is to compare and analyze the resolution performance capability of three techniques for achieving azimuth resolution such as the real aperture, the unfocused and the focused techniques, through the simulation. Simulation is performed to make the restricted conditions for the unfocused technique that can be implemented by the less commputing load of signal processingand the lower cost. Through the mission analysis, the use of SAR image can be applied for estimation of whole situation at the regional area in the field of military demands for tactical purpose as well as civilian demands for the damage of disaster. RPV and sall or medium aircraft are selected to carry the SAR for these purposes and the proper resolution turns ou 5~15 m. The trade-off study of variables through the simulations results in the proper conditions such that range is less 3, 000 m, Wavelength is 1~10 m, and the raw signals and results processed by three techniques for two point targets are exhibited undr such conditions. Therefore, at some points, the result of this paper si proposed for useful applications of unforcused technique in the restricted conditions except the identification of the small target at a long range re- quired for high resolution.

• Journal of Korean Society of Forest Science
• /
• v.96 no.3
• /
• pp.235-244
• /
• 2007

Potentials of AR CDM project in North Korea are assessed and feasible land area for AR CDM project is estimated. According to our estimation, There could be 515,000 hectares of forest lands deforested before 1990 in North Korea and 8,854 hectares at the regional level of Gae-sung City, which are eligible for AR CDM project, based on researches of satellite image analyses conducted from 1980's to 1990's. A baseline scenario assumed 44.73 tones of carbon stored in soil per hectare with no vegetation above ground remained during the project period following the default value of IPCC's Good Practice Guidance for LULUCF considering soil structure, climate and land use of the project area. The scenario also assumes that black rocust (Robinia pseudoacacia) is planted and the CDM project is implemented for 20 years. The costs for producing greenhouse gases CER (certified emission reduction) credits include costs of tree planting and forest management, and costs of project negotiation and transactions for issuing the credits. It is estimated that 376 tones of carbon dioxide per hectare can be accumulated and 503 temporary CER credits per hectare and 265 long-term CER credits per hectare could be produced during the project period. It is estimated to cost US$ 4.04 and US$ 7.67 to provide one unit of temporary credit and long-term credit, respectively. These values can be regarded as the cost of conferring emission commitment of a country or a private entity. However, it is not clear which option is better economically because the replacement periods are different in these two cases.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.47-47
• /
• 2011

하도 내 수역이 식생으로의 천이가 진행되고 최종적으로는 육상 식물들이 활착하게 되는 육역화 현상은 하도의 수리학적 문제 및 환경생태적 측면에서 큰 문제를 발생시킬 가능성을 내포하고 있다. 최근 하천복원의 필요성이 강조됨에 따라 물골공법 및 국부세굴 유도형 공법 등 실용성을 포함시킨 다양한 하천 복원공법이 제시되고 있다. 물골공법은 자연적인 물골형상에 의한 유사퇴적방지, 홍수시 유속저감 및 생물서식처를 조성하는 하상 생태복원 공법을 의미하며, 본 연구에서는 수리모형실험 및 3차원 수치모의를 이용하여 다양한 하도육역화 방지 공법 중 물골공법의 효과 및 적용성을 검토하였다. 물골공법의 특성 중 유사퇴적방지의 효율성 분석을 위해 부정류(unsteady state)상태에 대해 연구를 수행하였으며 홍수 이후 수위하강시 고수부지 및 물골 주변에서의 흐름특성을 재현하였다. 수위하강 모의를 위해 임의의 수위하강시간을 선정하여, 수위하강이 진행되는 시간( )을 각각의 수위하강시간으로 무차원 화한 후 무차원된 시간(t/�� )에 따른 흐름특성을 비교 분석하였으며 모의 및 분석결과, 수위하강시간이 80초 이상일 경우 주요 지점에서의 유속의 변화는 무차원된 시간에 대하여 일치하였으며 수리모형실험 및 수치모의에 적용할 수위하강시간으로 선정할 수 있었다. 물골 전구간에 대한 부정류 실험을 위해 LSPIV(Large-Scale Particle Image Velocimetry)장치를 이용하여 수위하강에 따른 물골주변의 흐름특성을 관측하였으며 3차원 수치모의를 통해 검증하였다. 실험 분석결과, 수위하강에 따라 고수부지 위로 흐르는 유수가 물골 내부로 유입되어 물골을 따라 흘러 물골 합류부로 이동하는 것으로 나타났으며, 이는 홍수시 유수와 함께 떠다니는 부유사(suspended load)가 물골로 유입되어 물골 합류부로 이동하므로 물골의 유사배제 가능성을 판단할 수 있었다. 또한 물골의 유사배제능력을 평가를 위해 실험을 통하여 산정된 최대 및 최소 마찰속도(U )와 유사이동 한계곡선을 이용하여 물골의 통한 배제 가능한 유사의 입경을 분석하였다. 분석결과, 최소 2mm에서 최대 4mm로 나타났으며 이 입경 이하인 유사에 대해서는 퇴적되지 않고 물골을 통하여 배제될 수 있을 것으로 예상되었다. 본 연구 결과 물골공법 적용시 수위하강에 따라 물골에서 하도방향으로 유사의 수세(flushing)효과가 나타났으며 유사의 부상 및 이송이 효과적으로 발생하여 고수부지 내 유사퇴적 방지가 효과적인 것으로 판단되었다. 추후 다양한 형상의 물골에 대한 능력검토가 보완된다면 물골설계지침 제안을 위한 자료로 활용 가능할 것이다.

• Journal of Preventive Medicine and Public Health
• /
• v.33 no.1
• /
• pp.17-24
• /
• 2000

Objectives : To propose the referential data to evaluate the health impacts of Vietnam veterans' children whose father were exposed to herbicides in Vietnam War. Methods : Vietnam veterans who visited to Pusan Veteran Hospital for medical care were recruited from April to October, 1998. They were 71 and asked about their own combat history, symptoms and illness, and health status of their 182 children. The informations were collected by direct and phone interview. Exposure estimation was also performed as exposure score depending on year and unit of participation, and personal episodes related to exposure to herbicide in the war. It classified into three groups; lower(<18.0), moderate(18-53), high$(\geq53)$ exposure group. Results : The mean age and the period into the combat of the veterans were 52.8 years and 15.0 months. The mean exposure score was $18.1{\pm}9.9$, and mainly distributed in lower (46.5%) and moderate(52.1%) exposure group. Most(90.1%) of them were diagnosed as sequelae(21 cases) and suspected sequelae(43 cases) of the herbicides by Korean veteran's hospital diagnostic criteria. The major sequelae was peripheral neuropathy 13 cases, chloracne 5 cases, and the major suspected sequelae was hypertension 20 cases, diabetes mellitus 18 cases, liver disease 12 cases, central neuropathy 11 cases, etc. About birth, 42.2% and 16.9% experienced spontaneous abortion and stillbirth, respectively. The mean exposure score was higher in stillbirth experience group(p<0.05). About half of the children(90 cases, 49.5%) hold the abnormal health status: those were skin pigmentation 38 cases, rash 23 cases, congenital anomaly 15 cases, general weakness 12 cases, purpura 8 cases, visual disturbance 8 cases, etc. These health problems had no association with father's exposure level(p>0.05). Conclusions : These results were depend on their own answers, and expectation for compensation did not excluded, therefore, this study may have limitations: inaccuracy of informations due to recall bias and response bias. Nevertheless, through this study, we could image the fundamental aspect for health impacts of Vietnam veterans' children for preparing the national control program and policy. A large scale epidemiologic study with valid exposure assessment on the health impacts of Vietnam veterans' children is recommneded.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.5
• /
• pp.497-503
• /
• 2014

Minimally invasive intramedullary nail insertion or plate osteosynthesis has shown good results for the treatment of long bone fractures. However, directly seeing the fracture site is impossible; surgeons can only confirm bone fragments through a fluoroscopic imaging system. The narrow field of view of the equipment causes malalignment of the fracture reduction, and radiation exposure to medical staff is inevitable. This paper suggests two methods to solve these problems: surgical navigation using 3D models reconstructed from computed tomography (CT) images to show the real positions of bone fragments and estimating the rotational angle of proximal bone fragments from 2D fluoroscopic images. The suggested methods were implemented using open-source code or software and evaluated using a model bone. The registration error was about 2 mm with surgical navigation, and the rotation estimation software could discern differences of $2.5^{\circ}$ within a range of $15^{\circ}$ through a comparison with the image of a normal bone.

• Journal of the Korean Society for Heat Treatment
• /
• v.25 no.1
• /
• pp.6-13
• /
• 2012

HVOF thermal spray coating of 80%WC-CoFe powder is one of the most promising candidate for the replacement of the traditional hard chrome plating and hard ceramics coating because of the environmental problem of the very toxic $Cr^{6+}$ known as carcinogen by chrome plating and the brittleness of ceramics coatings. 80%WC-CoFe powder was coated by HVOF thermal spraying for the study of durability improvement of the high speed spindle such as air bearing spindle. The coating procedure was designed by the Taguchi program, including 4 parameters of hydrogen and oxygen flow rates, powder feed rate and spray distance. The surface properties of the 80%WC-CoFe powder coating were investigated roughness, hardness and porosity. The optimal condition for thermal spray has been ensured by the relationship between the spary parameters and the hardness of the coatings. The optimal coating process obtained by Taguchi program is the process of oxygen flow rate 34 FRM, hydrogen flow rate 57 FRM, powder feed rate 35 g/min and spray distance 8 inch. The coating cross-sectional structure was observed scanning electron microscope before chemical etching. Estimation of coating porosity was performed using metallugical image analysis. The Friction and wear behaviors of HVOF WC-CoFe coating prepared by OCP are investigated by reciprocating sliding wear test at $25^{\circ}C$ and $450^{\circ}C$. Friction coefficients (FC) of coating decreases as sliding surface temperature increases from $25^{\circ}C$ to $450^{\circ}C$.