• Journal of Korea Foundry Society
• /
• v.17 no.6
• /
• pp.560-568
• /
• 1997

The dissolution behavior of secondary solidification phases in squeeze cast Al-3.9wt%Cu-1.5wt%Si-1.0wt%Mg has been studied using a combination of optical microscope, image analyzer, scanning electron microscope(SEM), energy dispersive spectrometer(EDS), X-ray diffractometer(XRD) and differential thermal analyzer (DTA). Special emphasis was placed on the investigation of the effects of the nonequilibrium heat treatment on the dissolution of the second solidification phases. Ascast microstructure consisted of primary solidification product of ${\alpha}-Al$ and secondary solidification products of $Al_2Cu$, $Mg_2Si$ and $Al_2CuMg$. Equilibrium and non-equilibrium solution treatments were carried out at the temperatures of $495^{\circ}C$, $502^{\circ}C$ and $515^{\circ}C$ for 3 to 5 hours. The amount of the dissolved secondary phases increased with increasing solution treatment temperature, for example, area fractions of $Al_2Cu$, $Mg_2Si$ and $Al_2CuMg$ were approximately 0%, 1.6% and 4.2% after solution treatment at $495^{\circ}C$ for 5hours, and were approximately 0%, 0.36% and 2% after solution treatment at $515^{\circ}C$ for 5hours. The best combination of tensile properties was obtained when the as-cast alloy was solution treated at $515^{\circ}C$ for 3hours followed by aging at $180^{\circ}C$ for 10 hours. Detailed DTA and TEM study showed that the strengthening behavior during aging was due to enhanced precipitation of the platelet type fine ${\theta}'$ phase.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.11
• /
• pp.2845-2854
• /
• 1998

Median filter can be implemented in the binary domain based on threshold decomposition, stacking property, and linear separability. In this paper, we develop one-dimensional and two-dimensional parallel algorithms for the median filter on a reconfigurable mesh with buses(RMESH) which is suitable for VLSI implementation. And we evaluate their performance by comparing the time complexities of RMESH algorithms with those of algorithms on mesh-connected computer. When the length of M-valued 1-D signal is N and w is the window width, the RMESH algorithm is done in O(Mw) time and mesh algorithm is done in $O(Mw^2)$ time. Beside, when the size of M-valued 2-D image is $N{\times}N$ and the window size is $w{\times}w$, our algorithm on $N{\times}N$ RMESH can be computed in O(Mw) time which is a significant improvement over the $O(Mw^2)$ complexity on $N{\times}N$ mesh.

• Journal of the Korean Society of Costume
• /
• v.61 no.1
• /
• pp.109-123
• /
• 2011

Postmodernism has affected general culture and arts as a powerful cultural image that has governed the later 20th century, and it is still a main subject as Zeitgeist representing modern society. Accordingly, this study is to verify the role and importance of the stage costume according to change of the art trend in the present age by clarifying relations between the postmodernism and the stage costume, and analyzing the postmodernism trend shown in postmodern classes. The postmodernism trend in costume is summarized as the deconstructionism, eclecticism and the populism. Hereunder is the conclusion of applying Postmodernism characteristics and creation mechanism commonly existing in theater and costume to the costumes of Korean theaters since 1990's. First, a deconsructionism trend of the Korean theater was visualized by the expression method of disembodiment and decomposition of stage costumes. Second, expression phase of interculturalism was concretely visualized through the stage costume, and it was considered that the postmodernism creation method. Third, a populism trend since 1990's was reflected to the stage costume, and deduced consensus with the audience and subculture familiar with the public as well as appeared as a phenomenon that emphasized a recreational elements. It is analyzed that this trend is a result that a concept of sportiveness was directly transferred through strong visual expression function of the stage costume. As a result of analyzing a Korean theater of the postmodernism disposition since 1990s, the costume reflected creational will of the postmodernism of works and played an important role as visual arts, created with a similar method and form.

• Journal of Digital Contents Society
• /
• v.11 no.2
• /
• pp.217-224
• /
• 2010

The purpose of this study was to examine the usefulness of IDEAL technique in breast MRI by performing a quantitative comparative analysis in patients diagnosed with DCIS. On a 3.0T MR scanner, fat-suppressed T2-weighted images and T1-weighted images before and after contrast enhancement were obtained from 20 patients histologically diagnosed with ductal carcinoma in situ (DCIS). The findings from the quantitative image analysis are the following: 1) On T2-weighted images, SNR were not significantly different in the lesion area itself between the CHESS and IDEAL groups, while the IDEAL group showed higher SNR at the ductal area and fat area than the CHESS group. In addition, the CNR were higher for the IDEAL group in those regions. 2) On T1-weighted images before enhancement, SNR were not significantly different in the lesion area itself between the CHESS and IDEAL groups, while the IDEAL group showed higher SNR at the ductal area and fat area than the CHESS group. In addition, the CNR were higher for the IDEAL group in those regions. 3) On T1-weighted images after enhancement, SNR were not significantly different in the lesion area itself between the CHESS and IDEAL groups, while the IDEAL group showed higher SNR at the ductal area and fat area than the CHESS group.

• The Journal of the Korea Contents Association
• /
• v.6 no.10
• /
• pp.143-152
• /
• 2006

JPEG2000, the standard of still image compression based on wavelet, will be widely used. One of the greatest characteristics of JPEG2000 is to offer ROI(Region-Of-Interest) coding. This is to compress with high quality the region that the user wants better than the other region. JPEG2000 and ROI have different parameters, which are tile size and ROI size, wavelet filter type and ROI shape and its location, codeblock size and number of ROI, number of DWT decomposition level and ROI importance, and number of quality layer and low resolution sub-band importance. In this paper, we shows the correlation of the parameters and ROI coding methods through experiments. This helps an application select the parameters and the methods to meet the application.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.6 s.144
• /
• pp.619-630
• /
• 2005

A two-frame PIV (Particle Image Velocimetry) technique is used to investigate the wake characteristics behind a marine propeller with 4 blades at high Reynolds number. For each of 9 different blade phases from $ 0^{\circ} $ to $ 80^{\circ} $, one hundred and fifty instantaneous velocity fields are measured. They are ensemble averaged to study the spatial evolution of the propeller wake in the region ranging from the trailing edge to one propeller diameter (D) downstream location. The phase-averaged mean velocity shows that the trailing vorticity is related to radial velocity jump, and the viscous wake is affected by boundary layers developed on the blade surfaces and centrifugal force. Both Galilean decomposition method and vortex identification method using swirling strength calculation are very useful for the study of vortex behaviors En the propeller wake legion. The slipstream contraction occurs in the near-wake region up to about X/D : 0.53 downstream. Thereafter, unstable oscillation occurs because of the reduction of interaction between the tip vortex and the wake sheet behind the maximum contraction point.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.6
• /
• pp.111-120
• /
• 2005

A cost effective three-dimensional color gamut mapping architecture is described. The conventional three-dimensional reduced resolution look-up table is considered and the concept of three-dimensional reduced resolution difference look-up table is introduced for cost effective and real-time color gamut mapping. The overall architecture uses one-dimensional memory decomposition of three-dimensional gamut mapping look-up table, three-dimensional interpolation and simple addition operation for generating the final gamut mapped colors. The required computational cost is greatly reduced by look-up table resolution adjustment and further reduced by the gamut mapping rule modification. The proposed architecture greatly reduces the required memory size and hardware complexity compared to the conventional method and it is suitable for real-time applications. The proposed hardware is suitable for FPGA and ASIC implementation and could be applied to the real-time display quality enhancement purposes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11C
• /
• pp.1518-1526
• /
• 2004

In this paper, an algorithm using wavelet transform for detecting a cut that is a radical scene transition point, and fade and dissolve that are gradual scene transition points is proposed. The conventional methods using wavelet transform for this purpose is using features in both spatial and frequency domain. But in the proposed algorithm, the color space of an input image is converted to YUV and then luminance component Y is transformed in frequency domain using 2-level lifting. Then, the histogram of only low frequency subband that may contain some spatial domain features is compared with the previous one. Edges obtained from other higher bands can be divided into global, semi-global and local regions and the histogram of each edge region is compared. The experimental results show the performance improvement of about 17% in recall and 18% in precision and also show a good performance in fade and dissolve detection.

• The KIPS Transactions:PartB
• /
• v.12B no.4 s.100
• /
• pp.379-386
• /
• 2005

This paper provides a rigorous theory for analysis of quantization effects and optimum filter bank design in quantized multidimensional subband filter banks. Even though subband filter design has been a hot topic for last decades, a few results have been reported on the subband filter with a quantizer. Each pdf-optimized quantizer is modeled by a nonlinear gain-plus-additive uncorrelated noise and embedded into the subband structure. Using polyphase decomposition of the analysis/synthesis filter banks, we derive the exact expression for the output mean square quantization error. Based on the minimization of the output mean square error, the technique for optimal filter design methodology is developed. Numerical design examples for optimum nonseparable paraunitary and biorthogonal filter banks are presented with a quincunx subsampling lattice. Through the simulation, $10\~20\;\%$ decreases in MSE have been observed compared with subband filter with no quantizers especially for low bit rate cases.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.10
• /
• pp.1185-1193
• /
• 1999

최적 스택 필터는 시그널 또는 영상의 임의의 특성 정보를 보존하고자 하는 요구조건에 의해 강제된 구조적 제약 하에서 최대의 잡음제거 효과를 얻을 수 있다. 그리고 임계치 분할 특성과 양의 부울 함수에 기반한 이진 영역에서의 처리 특성은 이 필터가 높은 병렬성을 갖고 있음을 보여준다. 본 논문에서는 두 개의 병렬 계산 모델 MCC(Mesh-Connected Computer)와 CCC(Cube-Connected Computer)에서 최적 스택 필터를 위한 1차원 병렬 알고리즘을 개발한다. 최적 스택 필터의 실행 시간은 주로 이진 median 연산에 의해 결정되고 본 논문에서 제안된 알고리즘은 선형 분리성에 의해 이 연산을 구현한다. 이를 바탕으로, M 레벨의 1-D 시그널의 길이가 L이고 윈도우 폭이 N이라고 가정할 때, 제안된 알고리즘은 {{{{root M times root M`` MCC에서 O(L sqrt{M}`) 시간에 그리고 M 개의 PE를 갖는 CCC에서 O(L log M)시간에 수행될 수 있다. 또한 잡음을 더욱 효과적으로 제거하기 위해 윈도우 폭 N을 증가시킬 때, 제안된 병렬 알고리즘의 계산 시간은 일정하게 유지됨을 보인다.Abstract An optimal stack filter achieves the maximum noise attenuation under the structural constraints imposed by the requirement of preserving certain signal or image features. And the filter provides a high parallelism due to the principles of threshold decomposition and binary processing based on positive Boolean functions(PBFs). In this paper, we develop an one-dimensional parallel algorithm for the optimal stack filter on two parallel computation models, MCC(Mesh-Connected Computer) and CCC(Cube-Connected Computer). The running time of the optimal stack filter depends mainly on the binary median operation and our algorithm realizes this operation by the linear separability. Based on this scheme, our parallel algorithm can be performed in {{{{O(L sqrt{M}`) MCC and inO(L log M) time on CCC with M PEs, when the length of M``-valued 1-D signal is L`` and window width is N`` Also, we show that the computation time of our parallel algorithm keeps constant when the window width N increases in order to achieve the best noise attenuation.