• Korean journal of food and cookery science
• /
• v.22 no.4 s.94
• /
• pp.419-427
• /
• 2006

The purpose of this study is to promote the substitution of rice flour for wheat flour in making bread and thus the consumption of rice by examining the effect of particle size of rice flour on leavening rice bread. For this purpose, several experiments were carried out. With regard to particle size distribution, 59.45% of wheat flour had passed 200 mesh and 3 kinds of rice flour milled to penetrate into 20, 35, and 45 mesh (S1, S2 and S3) had passed 21.88%, 33.1% and 36.38% of those for 200 mesh, respectively. To leaven the rice flour dough to bread, 25% of vital gluten was needed. To determine the optimal water quantity for rice bread dough, the hardness of wheat and rice flour dough was measured by rheometer. The appropriate water quantity for S1, S2 and S3 was set at 285 ml , 295 ml and 335${\sim}$340m1, respectively. The loaf volume index of the wheat flour bread was 6.24, while that of and rice flour bread S1, S2 and S3 was 5.38, 5.50 and 5.75, respectively. These results indicated that the loaf volume index of rice flour bread is lower than that of wheat flour bread, but that the volume of rice flour bread was increased with fuel particle size of rice flour. Scanning electron microscopy (SEM), image of the wheat bread tissue at a magnification of 35 times showed long, large, oval-shaped, air cells and thin cell membrane, as well as small air cells, whereas the images of rice flour showed angular, circular, air cells and rough and thick cell membrane. The size and number of air cells in the rice bread were larger in S2 and S3 with fuel particle flours than in S1. In particular, the bread made with S3 contained many air cells that were as large as those in the wheat bread were. In addition, when the inner cell wall was magnified 1500 times, almost no small air cell was observed in C and S3, whereas many fine air cells were observed in the cell wall of S1 and S2.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.529-535
• /
• 2020

As the main technology of the 4th industrial revolution, immersive 360-degree video contents are drawing attention. The market size of immersive 360-degree video contents worldwide is projected to increase from $6.7 billion in 2018 to approximately $70 billion in 2020. However, most of the immersive 360-degree video contents are distributed through illegal distribution networks such as Webhard and Torrent, and the damage caused by illegal reproduction is increasing. Existing 2D video industry uses copyright filtering technology to prevent such illegal distribution. The technical difficulties dealing with immersive 360-degree videos arise in that they require ultra-high quality pictures and have the characteristics containing images captured by two or more cameras merged in one image, which results in the creation of distortion regions. There are also technical limitations such as an increase in the amount of feature point data due to the ultra-high definition and the processing speed requirement. These consideration makes it difficult to use the same 2D filtering technology for 360-degree videos. To solve this problem, this paper suggests a feature point extraction and identification technique that select object identification areas excluding regions with severe distortion, recognize objects using deep learning technology in the identification areas, extract feature points using the identified object information. Compared with the previously proposed method of extracting feature points using stitching area for immersive contents, the proposed technique shows excellent performance gain.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.4
• /
• pp.77-84
• /
• 2012

Face classification has wide applications in intelligent video surveillance, content retrieval, robot vision, and human-machine interface. Pose and expression changes, and arbitrary illumination are typical problems for face recognition. When the face is captured at a distance, the image quality is often degraded by blurring and noise corruption. This paper investigates the efficacy of multi-classifier decision level fusion for face classification based on the photon-counting linear discriminant analysis with two different cost functions: Euclidean distance and negative normalized correlation. Decision level fusion comprises three stages: cost normalization, cost validation, and fusion rules. First, the costs are normalized into the uniform range and then, candidate costs are selected during validation. Three fusion rules are employed: minimum, average, and majority-voting rules. In the experiments, unfocusing and motion blurs are rendered to simulate the effects of the long distance environments. It will be shown that the decision-level fusion scheme provides better results than the single classifier.

• Journal of Korean Home Economics Education Association
• /
• v.31 no.2
• /
• pp.137-153
• /
• 2019

This study reviewed the Technology & Home Economics Education textbooks to examine if their illustrations would be appropriate for students' balanced view of gender. To this end, the textbooks of 'Technology & Home Economics Education 1 and 2' from 12 publishers (24 books in total) were analyzed focusing on the formative and content characteristics of illustrations in the textbooks. The results of this study is as follows. There were areas in the textbooks that may not be considered gender-equal. Although the textbooks have been improved to some extent from the previous versions, they still show gender stereotypes biased towards men. If students are constantly exposed to the prescriptive characteristics that are in favor of certain gender, they would find it difficult to develop their personality strengths, due to the gender role pressures. In order to help students cultivate sensitivity and activism toward the gender equality issues, it is important that the textbooks are gender-equal. To summarize, in order to suggest to students a balanced image of society with male and female cooperating with each other in diverse domains, it is deemed necessary to constantly examine and revise the textbooks for their gender stereotypic contents, and thereby, improve them for gender equality.

• Journal of Broadcast Engineering
• /
• v.25 no.4
• /
• pp.497-506
• /
• 2020

A chameleonic surface proposed in this study was a pin-art and 3D display device for generating arbitrary shapes. A smooth and continuous surface was formed using slim telescopic actuators and high-elasticity composite material. Realistic 3D shapes were continuously generated by projecting dynamic mapping images on the surface. A slim telescopic actuator was designed to show long strokes and minimize area for staking. A 3D shape was formed by thrusting and extruding the high-elasticity material using multiple telescopic actuators. This structure was advantageous for generating arbitrary continuous surface, projecting dynamic images and lightening weight. Because of real-time synchronization, a distributed controller based on EtherCAT was applied to operate hundreds of telescopic actuators smoothly. Integrated operating software consecutively generated realistic scenes by coordinating extruded shapes and projecting 3D image from multiple projectors. An opera content was optimized for the chameleon surface and showed to an audience in an actual concert.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.4
• /
• pp.621-628
• /
• 2002

Effect of the thickness of packaging film on the ripening of mature-green mume (Prunus mume Sieb. et Zucc) fruit was investigated by measuring physicochemical changes of the fruit during storage. Fruits were packaged using low density polyethylene (LDPE) films with thicknesses of 20, 30, and 40$\mu$m and stored at the room temperature. The physicochemical properties such as contents of various pectic substances, molecular weight distribution of soluble pectic substances, and surface image of the fruit were determined during storage of 8 days. In general, regardless of the thickness of the films applied, a content of water-soluble pectin (WSP) in the fruit was increased during storage, but both contents of HCI- soluble pectin (HSP), and Ca and Mg in total alcohol-insoluble solids were decreased. Sephacryl S-300 gel filtration study revealed that fractions of high molecular weight HSP and WSP decomposed into lower molecular weight pectins during storage. The scanning electronic microscope also identified a significant structural change of the fruit skin over the storage time. It could be concluded from the results that fruits packaged with LDPE 30${\mu}{\textrm}{m}$ film maintained the highest physicochemical quality of green mume fruit during storage.

• The Journal of Art Theory & Practice
• /
• no.7
• /
• pp.7-36
• /
• 2009

This paper intends to examine the significance of the "Minjoong Misool(People's art)" of the 1980s emerged in Korea in its social, cultural, and art historical context. This paper also aims to provide an analysis of the meaning and form of the individual artist's works, which have been overlooked under the dominant discourse that has emphasized their political role as a collective group. In particular, this paper scrutinizes the work of "Critical Realists" by examining the way in which they perceived Korean society in the early 1980s and visualized their experiences of the period. The figurative art newly emerged in the early 1980s challenged the formalist Modernism, which was adopted into Korea and translated into monochrome paintings and the work of the conversative academicism of the 1970s. The figurative art encouraged a social communication and moreover it intended to criticize the conflicts in the political, economical, and social domains in Korea. The targets of its critique include the unavoidable results of the unprecedented development of economy, various social phenomena of the post-industrial society, and the growth of the commercialized kitsch culture. Along with Shin, Hak-chul's work that incorporates collage technique since the 1980s, the work of some members of "Reality and Utterance" and "Im- sul-nyun" exemplify their critical interests in disclosing the false dream of wealth and happiness by both referring to and drawing on the utopian fantasy manipulated and distributed by mass media and commercial advertisements. This paper pays particular attention to Nouvelle Figuration emerged in France and Europe during the 1960s, which is comparable to the new figurative art emerged in Korea during the 1980s. Nouvelle Figuration criticized the autonomy in art isolated itself from political and social reality after WWII, in particular the indifference of Informel and abstract art as well as American abstract art. Moreover it became rather politicized around May of 1968. Given that French Nouvelle Figuration was introduced in Korea in 1982 and made a significant contribution to the formation of figurative art in Korea, it should be noted that the new figurative art emerged in the 1980s in Korea cannot be categorized merely in relation to People's Art. This paper intends to critically redress the notion that People's art was formed in the particular political, economical, and cultural context of Korea independent of the contemporary artistic practices outside Korea. It will provide a critical examination and analysis of the content and form of the new figurative art, from which People's Art was germinated, in the global context.

• Archives of design research
• /
• v.19 no.4 s.66
• /
• pp.175-186
• /
• 2006

In the 21C, each nation controls exhaust fumes from automobiles and makes an effort to develop alternative energy because of serious environmental problem. Jechon area has many historical and cultural archeological sites. And Jechon city sponsors various cultural events. But the way of transportation which is connected with Jecheon and around sightseeing places is general and not ready yet. Therefore, if a special means of vehicle is developed, it could play an another role of sightseeing resources. Special identity of Jecheon area for establishment of green vehicle traffic system which gives Jecheon area specific character was investigated for theoretical background. Traffic system was studied for establishment of direction through existent successful case study. Moreover content, method, structure and advantage & shortcoming etc. of vehicle that use green energy resource such as solar car, fuel cell car, hybrid car, natural gas car etc. were examined. The suitable means of vehicle for Jechon area was proposed to three directions with research and investigation. After comparison and investigation by inquiry of each section's experts, the most suitable traffic system of which energy resource of car, form of vehicles, the complement, dimension of vehicles etc. were decided. Design proposal should be drawn according to process of automobile design in decided direction. Special Exterior design of vehicle that use green energy resource connecting Jecheon and around area should be suggested in Jecheon City Hall and Chungchong-bukdo provincial office for vivify image of cleanliness area.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.3
• /
• pp.193-198
• /
• 2010

Melanin is synthesized by the melanocytes in basal layer of epidermis and distributed over all the layers of skin including corneocytes in stratum corneum, outermost layer of the epidermis. Melanin of corneocytes was stained using Fontana-Masson method and quantified by image analysis. The correlation between melanin contents and skin color value was estimated in the skin of 71 Korean women. Melanin covering area (MCA) showed good correlation with $L^*$ value and $ITA^{\circ}$ (Individual Typology Angle) (r = 0.6049, 0.6651, respectively). MCA can be used as new parameter for skin color study and has potential application for evaluating the efficacy of the skin whitening cosmetics.

• Restorative Dentistry and Endodontics
• /
• v.17 no.2
• /
• pp.307-330
• /
• 1992

The aim of this study was to investigate the physical properties of visible light curing Glass Ionomer cement for restorative esthetic filling. The control group was the autopolymerizing GC Fuji II Glass Ionomer cement (2.2: 1 P/L ratio) and the experimental groups were made by following procedure. To induce the polymerization by visible light, the powder of GC Fuji II GI cement and the liquid of Vitrabond for base & liner were mixed in an amalgam capsule with 2.5:1, 3.0:1, 3.5:1 P/L ratio (% wt/wt). After fabrication of specimens, compressive strength, fracture toughness ($K_{IC}$) Scanning Electron Microscope and X-ray Diffraction, water-leachable content, marginal leakage and surface roughness were studied. The results were as follows: 1. Only experimental No. 1 group (visible light curing) showed less compressive strength than control group 1 hour after curing. Strength was increased with aging in all groups, so the compressive strength of light curing groups was no less than that of autopolymerizing group after 3 weeks. 2. Experimental No.3 group (visible light curing) was inferior to No.2 group (visible light curing) in fracture resistance but light curing groups were more resistant to fracture than autopolymerizing group and showed ductile fracture pattern as compared with the brittle fracture pattern of autopolymerizing group. 3. From scanning electron microscopic image, various sized unreacted powder particles, surrounded by silica gel, were embedded in polysalt matrix. Light curing groups showed little crack and more dense unreacted particles than autopolymerizing group. 4. From X-ray diffraction analysis, GC Fuji II Glass Ionomer cement powder and all groups showed glassy appearance but light curing groups seemed to be more intensive in crystaline than autopolymerizing group. S. The most significant dissolution was shown in early setting period in all group. Light curing groups were dissolved less than autopolymerizing group. 6. Marginal leakage was not different significantly in case of cavity margin composed of same tooth structure (ex. only enamel margin, only dentin margin) but much more leakage was shown in dentin/cementum margin than enamel margin. In only case of only enamel margin, light curing groups were superior to autopolymerizing group. 7. All groups showed relatively smooth surface, which irregularity was less than $1{\mu}m$. Light curing groups were smoother than autopolymerizing group.