• 조명전기설비학회논문지
• /
• 제26권9호
• /
• pp.1-7
• /
• 2012

In this paper, we present a new lighting control method considering ambient light in addition to the required lighting illumination for efficient energy saving of a LED stand. We estimate accurate environmental illuminance using a cheap illuminance sensor by modeling measured- and actual-illuminance using quadratic polynomial approximation. The relation between PWM(Pulse Width Modulation) duty ratio and illuminance intensity is modeled by a linear model. Illumination of the LED stand is controlled by estimating the difference of required illumination and the estimated ambient illumination. The developed LED stand has reduced electric energy consumption compared with a conventional manually controlled LED stand with the same lighting source. In addition, human subject evaluation shows that the LED stand, which is applied the proposed method, is more satisfactory than conventional ones since the proposed automatic controlled illumination produce more accurately required lighting and it is convenient.

• 설비공학논문집
• /
• 제23권3호
• /
• pp.231-242
• /
• 2011

This study examines influences of a daylight dimming control system on the variation of indoor illuminance and lighting energy savings in a small office space. Field measurements and a series of computation were performed for typical types of sky conditions in summer. Results indicate that the daylight illuminance under clear and partly-cloudy sky were close to the target illuminance during a majority of time due to a higher ratio of window to wall. However, the target illuminance was not kept successfully due to the variation of photosensor signals which were strongly influenced by desktop illuminance. The system with partially-shielded conditions succeeded to keep target illuminance under clear sky conditions. The system failed under overcast sky conditions since the electric light output from fixtures caused excessive signals to photosensors due to insufficient daylight on a desktop. Unshielded and fully-shielded conditions were not recommended for effective controls of the systems. The influence of lighting fixtures on photosensors should be minimized to achieve successful lighting controls by daylight dimming systems.

• Architectural research
• /
• 제7권2호
• /
• pp.47-54
• /
• 2005

A photoelectric dimming control system for a small private office space with a double skin envelope system was analyzed for the purpose of examining optimum control performances under a variety of daylight conditions. Computer simulations were performed for the three different photosensor types positioned at the center of ceiling in the space. They were applied in both a south and north-facing room. Daylight conditions were a fixed horizontal venetian blind on an external envelope and a retractable shading device on an internal envelope under a clear, intermediate and overcast sky at different times of a day and year. Partially-shielded photosensors provided good control performances providing the required electric light output under clear and intermediate sky conditions. Unshielded photosensors failed to provide necessary illuminance levels producing less electric output and fully-shielded photosensors generally provided excessive light output. Reasonable electric lighting energy savings were achieved except under overcast sky conditions where the control system did not contribute to energy savings due to the less daylight through envelopes. The retractable shading device covering 50% of the internal envelope reduced energy savings up to 19.62%, but the workplane illuminance levels were maintained within recommended ranges. The coefficients of determination between workplane illuminance and photosensor illuminance due to daylight ranged from 0.74 to 0.98. Partially-shielded conditions provided best correlations and the north-facing room yielded stronger correlation than the south-facing room.

• 전기전자학회논문지
• /
• 제20권2호
• /
• pp.188-191
• /
• 2016

본 논문에서는 조도 감지기를 이용하여 사용자가 설정한 조도량에 따라 점등되는 방식의 절전형 간판 자동 전원 제어기를 제안한다. 조도량 설정 방식은 사용자의 편리성을 감안하여 조도량 단위별 구간 분류 알고리즘을 통해 설정 과정이 누구나 쉽게 조작이 가능한 가변저항 방식을 제안한다. 자동 점등의 기준이 되는 조도량의 데이터는 조도 감지기가 측정한 조도량을 무선 통신을 통해 간판 자동 전원 제어기에 보내어 간판의 점등을 제어하게 된다. 본 논문에서 제안된 조도 감지기를 이용한 절전형 간판 자동 전원 제어기의 성능을 평가하기 위하여 공인 시험기관에서 외부의 빛이 모두 차단된 상태에서 시험한 결과, 각 구간별로 오차율이 ${\pm}3%$ 이하로 측정되어 우수한 성능을 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.120-122
• /
• 2008

This paper presents a color control algorithm for LED lights with independently changable illuminance. The proposed algorithm adjusts the light intensity to obtain a desired color with alterable illuminance To verify the validity of the proposed algorithm, it was applied to control of a RGBW LED module. The achieved color temperature range of the module was from 3000K to 7500K, and the illumination one was from 500 lux to 1500 lux.

• 조명전기설비학회논문지
• /
• 제29권11호
• /
• pp.6-17
• /
• 2015

In this paper, colors of broadcast lightings composed of Red, Green, and Blue LED(Light Emitted Diode) can be linearly and quantitatively controlled in low illuminance. Because LED cannot emit uniform illuminance in low illuminance, the colors of RGB LED are unmixable. Furthermore, the illuminances are nonlinear with the dimming values of the RGB LED due to the nonlinearity of the output illuminance with the current through the LED. This nonlinearity generated errors of the target colors and illuminances. The proposed algorithm set up the target colors, which is expressed by the color coordinates in CIE 1931 color space, and the target illuminances. Then the illuminances of RGB LED were calculated using color mixing theory. The calculated illuminances determined the dimming values of the RGB LED for transmission via DMX512 communication. After the broadcasting lighting received the dimming values of the RGB LED via DMX512 communication,.RGB LED can emit target color and illuminance, and be controlled by calculating the PWM(Pulse Width Modulation) duty ratio of the hybrid LED driver which be considered the nonlinearity for the illuminances of the LED. As a result, the proposed algorithm can linearly and quantitatively control the colors and illuminances in full range of illuminance. Then we verify experimentally that the errors of the emitted color coordination x, y and illuminance are 2.27%, 3.6% and 1.5%, respectively.

• 조명전기설비학회논문지
• /
• 제23권12호
• /
• pp.10-22
• /
• 2009

본 논문은 독립적으로 LED의 색온도와 조도를 제어하는 알고리즘과 이를 이용한 LED 조명 시스템을 제안한다. 제안된 알고리즘이 항상 해를 가지는 것을 증명해 제안된 알고리즘이 유효함을 보여주었다. 적색, 녹색, 청색, 백색 (RGBW) LED를 사용한 LED 모듈 제어에 제안된 알고리즘을 적용하였다. 이 모듈의 색온도는 3,500~7,500[$^{\circ}K$], 조도는 500~1,500[lux] 범위에서 변화했다. LED의 접합온도가 40[$^{\circ}C$]로 유지될 때, 이 범위 내에서 색온도와 조도의 편차는 0.8[%] 이하였다. 30~70[$^{\circ}C$]의 범위에서는 목표 조도와 색온도가 각각 1,000[lux]와 6,500[$^{\circ}K$] 일 때 조도와 색온도의 편차가 2.1[%]와 3.1[%] 이하이고, 온도 보상된 경우에는 편차가 1[%]와 0.49[%] 이하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2417-2419
• /
• 1999

Among educational environment, lighting's role is getting more important since it improves the visual tasks, capability of work, and it help to build both balanced mind and body. Also, since students spend most of their time inside rather than outside, students need appropriate illuminance everyday. If optimum illuminance, the color rendering properties and controlled distribution of lighting is given, people can decrease the fatigue of eyes, recover their health, and also, people can maximize their efficiency of work. In this paper, their is a comparison between the real illuminance and illuminance distribution due to the uniformity ratio of 2 or 3 dimensions by simulation.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.169-172
• /
• 2009

Daylight responsive dimming system, which is one of the method for utilizing available daylight. continuously adjusts lighting output with an algorithm of the correlation of photosensor signal and workplane illuminance levels. This system must be related with shading systems which are to control penetrating daylight. The purpose of this research is to analyze illuminance distributions by artificial lighting in different shading systems. Lighting power is changed by 5 levels in nighttime for comparing correlation between illuminance and lighting power in different shading systems.

• KIEAE Journal
• /
• 제10권6호
• /
• pp.41-46
• /
• 2010

This study is to validate the K University daylight measurement system according to the CIE guide of recommended practice of daylight measurement. In this study global irradiance, illuminance, direct normal illuminance, diffuse irradiance, illuminance and vertical illuminances(North, West, South, East) were measured and compared in accordance with the CIE quality control test. Field monitoring was conducted from 1st August to 15th August 2010. Results for the CIE tests 1 to 4 showed an accuracy of 100%. This indicates that the K University daylight measurement system is reliable and the measurement data would be useful for further daylight researches.