• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.4
• /
• pp.40-48
• /
• 2011

In this study, we investigated the usability of new powdered additives in the paperboard industry. We manufactured the powdered additives from peanut husks and garlic stems by grinding. The chemical composition, particle size, particle size distribution, and particle shape were investigated to identify the basic properties of the powdered raw materials. To determine the effect of the powdered additives on paper properties, handsheets were prepared by adding the powdered additives to the pulp slurry. The chemical composition, such as the contents of holocellulose, lignin, and ash, showed similar values to those of other biomass materials. The particles of peanut husk powder were irregularly shaped, smaller, and had a broader particle size distribution than those of the garlic stem powder, which had the fibril form. The particles of the two powdered raw materials showed a positioning of expansion in the fiber network, resulting in increased bulk and a loss of strength. Handsheets containing garlic stem particles were stronger than handsheets containing peanut husk particles. Finally, the new powdered additives are beneficial to the bulk of paperboard.

• Journal of International Academy of Physical Therapy Research
• /
• v.4 no.2
• /
• pp.595-599
• /
• 2013

The purpose of this study is to identify the bridge exercise posture for the efficient exercise by comparing the muscle activity of the lower limbs according to the changes in muscle length because of knee angle in bridge exercise. The subjects of this study were 9 randomly selected males in their 20s living in D city from those who satisfied inclusion criteria. The measured muscles were Vastus medialis oblique, Vastus lateralis, Semitendinosus, Biceps femoris, Gluteus maximus, Gluteus medius, Tensor faciae latae, and Adductor longus. Data were analyzed through paired comparison test. In the result, ST, BF, and TFL muscle activities were high when knee joint flexion angle was $90^{\circ}$ Although in most cases higher muscle activity was shown at $90^{\circ}$ than $60^{\circ}$ there was no statistical significance. Interestingly, it was lower at $90^{\circ}$ than $60^{\circ}$ in VL. In ST, BF, and TFL, it was significantly higher at $90^{\circ}$ than $60^{\circ}$ (p<.05). Conclusively, knee angles in bridge exercise may affect the muscle activity, and in particular when the activity of two joint muscles such as semimenbranosus muscle, biceps femoris muscle, and tensor fasciae latae muscle increase as the angle gets higher. Therefore, it is considered that this study will provide helpful tips to develop muscular strength enforcement program for the patients with damages in the lower limbs through bridge exercise in clinical situations.

• Journal of the Korean Ceramic Society
• /
• v.39 no.2
• /
• pp.194-198
• /
• 2002

Various composition of $K_2O{\cdot}CaO{\cdot}P_2O_5$ glasses were studied by melting process to identify glass forming region. Thermal properties were observed by DSC and TG-DTA, structural properties were investigated by FT-IR and Raman Spectroscopy. The glass transition temperature (Tg) and softening temperature (Ts) were decreased with increasing $K_2O\;and\;P_2O_5$ contents. The basic structural unit of phosphate glasses is the $PO_2\;and\;PO_4^{3-}$ groups to make a cross-link and P-O-P group to form skeleton structure. As CaO content was increased, the P-O-P field strength in these glass was increased and intensity of $PO_2\;and\;PO_4^{3-}$ stretch was decreased.

• Journal of the Korea Concrete Institute
• /
• v.18 no.3 s.93
• /
• pp.425-429
• /
• 2006

Horizontal cracks at the mid-depth of concrete slabs were observed at a section of the continuously reinforced concrete pavement(CRCP) structures on the Korea Highway Corporation's Test Road. To investigate the existence and the extent of horizontal cracks in the concrete slab, a number of cores were taken from the section of CRCP. To identify the causes of horizontal cracks, numerical analyses were conducted. Several variables relative to design, material, and environment were considered in the studies to evaluate possible causes of horizontal cracking. A numerical model of CRCP was developed using the finite element discretization, and the shear and normal tensile stress distributions in CRCP were investigated with the model. Numerical analysis results show that the maximum shear and normal tensile stresses develop near the depth of steel bars at transverse cracks. If those maximum stresses reach the strength of concrete, horizontal cracks occur. The maximum stresses become higher as the environmental loads, coefficient of thermal expansion of concrete, and elastic modulus of concrete increase.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.19 no.2
• /
• pp.61-66
• /
• 2013

Background: This study tried to identify the bridge exercise posture for efficient exercise application by comparing muscle activity of buttocks and thighs according to internal-external rotation and pronation & supination in bridge exercise. Method: Nine males in their 20s living in D city were randomly selected as subjects. Muscles such as vastus medialis oblique (VMO), vastus lateralis (VL), semitendinosus (ST), biceps femoris (BF), gluteus maximus (GMAX), gluteus medius (GMED), tensor fasciae latae(TFL), and adductor longus (ADL) were measured using eight channel surface electromyogram (MyoSystem 1400A, Noraxon, USA) to measure muscle activity. Statistics process was performed through paired t test. Results: In the changes in electromyogram signals according to internal-external rotations according to internal-external rotation of shinbones, in most cases muscle activity was higher in external rotation than in internal rotation, but there was no statistical significance (p>.05). In particular, it was lower in TFL and ADL. There was no statistical significance in the comparison between two groups (p>.05). In the changes in electromyogram signals according to internal-external rotations according to pronation & supination of thighs, GMED showed significantly higher value in supination than in pronation (p>.05), and in ADL pronation is significantly higher than supination (p<.05). Conclusion: In internal-external rotation of shinbone and pronation & supination of thighs in bridge exercise, changes in muscle length can make effects on muscle activity of buttocks and thighs. Therefore, muscle strength enforcement program on buttocks and thighs through bridge exercise can make effects on patients with lower limb functional damages in clinical situations.

• Journal of muscle and joint health
• /
• v.24 no.3
• /
• pp.217-226
• /
• 2017

Purpose: The aim of this study was to identify the effects of Tai Chi training program on physical fitness, stress response and ego-resiliency in nursing students. Methods: 28 nursing students of D metropolitan city participated in non-equivalent control group pre- and post-test group test in quasi experimental design with written consent. Fourteen participants in the control group who did usual activities and 14 experimental participants who promised to participate 24 Tai Chi training sessions for 12 weeks. Both groups completed pre- and post-test measurement for physical fitness, a questionnaire regarding their stress response and ego-resiliency. Each 60-minute Tai Chi session was consisted of 5-minute warm up, 10-minute meditation, 40-minute Tai Chi, and 5-minute finishing exercise. Results: After 12 weeks, participants in the Tai Chi group reported significantly higher score in muscle endurance (t=3.77, p=.001), leg muscular strength (t=2.14, p=.042), and balance (t=2.12, p=.044) compared to the control group. The Tai Chi group recorded significantly lower score than the control group on stress response (t=2.75, p=.011). Conclusion: The findings highlight the importance of Tai Chi for a reduction in stress response and promotion in physical fitness in nursing students. Applying Tai Chi training to nursing program will help nursing students to have better academic performance.

• Applied Chemistry for Engineering
• /
• v.5 no.6
• /
• pp.990-997
• /
• 1994

The vulcanized NR and blend films were prepared with mixing of natural rubber latex (NRL) and methyl methacrylated grafted latex(MGL) with various additives by dipping process. It was investigated the basic properties of vulcanized NR films that is optimum condition of the mature time, swelling degree, cure time at $110^{\circ}C$, and measured the mechanical properties of tensile strength and elongation of its condition. In order to identify the surface structure and the slip properties of blend films contact angles and static and kinetic friction coefficient were measured. Contact angles were decreased with increment of blend ratio of MGL, and static and kinetic friction coefficient were decreased rapidly for the NR/MG and NR-d-MG films than for the NR films. From the results, NR/MG and NR-d-MG films has slip's reinforcement in skin contact surface with increased of blend ratio of MGL.

• Steel and Composite Structures
• /
• v.27 no.3
• /
• pp.389-399
• /
• 2018

A perforated shear connector group is commonly used to transfer shear in steel-concrete composite structures when the traditional shear stud connection is not strong enough. The multi-hole perforated shear connector demonstrates a more complicated behavior than the single connector. The internal force distribution in a specific multi-hole perforated shear connector group has not been thoroughly studied. This study focuses on the load-carrying capacity and shear force distribution of multi-hole perforated shear connectors in steel-concrete composite structures. ANSYS is used to develop a three-dimensional finite element model to simulate the behavior of multi-hole perforated connectors. Material and geometric nonlinearities are considered in the model to identify the failure modes, ultimate strength, and load-slip behavior of the connection. A three-layer model is introduced and a closed-form solution for the shear force distribution is developed to facilitate design calculations. The shear force distribution curve of the multi-hole shear connector is catenary, and the efficiency coefficient must be considered in different limit states.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.18
• /
• pp.7713-7718
• /
• 2014

Background: Despite evidence suggesting roles for caspase-8 (CASP8) -652 6N del and D302H polymorphisms in prostate cancer (PCa), the association of these polymorphisms with PCa risk remains inconclusive. Therefore, a meta-analysis was performed to more precisely estimate the association of CASP8 -652 6N del and D302H polymorphisms with PCa susceptibility. Materials and Methods: A comprehensive literature search was conducted to identify all case-control studies of CASP8 D302H and -652 6N del polymorphisms and PCa risk. Odds ratios (ORs) and 95% confidence intervals (CIs) were used to assess the strength of the association and the precision of the estimate, respectively. Results: Nine -625 6N del studies and 4 D302H studies were included. CASP8 -652 6N del and D302H polymorphisms were not significantly associated with PCa risk in the overall analyses. However, in the subgroup analysis stratified by ethnicity, -625 6N del was significantly associated with PCa risk in the East Asian and Indian populations under the recessive model. Furthermore, the subgroup analysis strongly suggested that D302H was associated with lower PCa risk in the Non-Indian population under the dominant model. Conclusions: In our meta-analysis, ethnic-specific differences were evident in the association of CASP8-625 6N del and D302H polymorphisms with PCa risk.

• The Journal of Society for e-Business Studies
• /
• v.23 no.2
• /
• pp.49-65
• /
• 2018

The purpose of the research is to identify the effects of brand evidence, brand personality and negative factors on extended brand trust and customer purchase intention in IoT (Internet of Things) service. Negative factors include scarcity marketing and privacy concern. To achieve this objective, we analyzed the 269 respondents who had used Xiaomi products at least more than once. The results of this study are as follows: First, it was found that core service, self-image congruence of brand evidence and brand personality has a positive influence on extended brand trust. But, perceived price of brand evidence is not related to extended brand trust. Secondly, Scarcity marketing influenced extended brand trust. But, Privacy concern is not related to extended brand trust. Consumers did not realize privacy because of technological innovation of IoT. Thus, the research has a different significance from antecedent research.