• Coupled systems mechanics
• /
• 제2권2호
• /
• pp.175-190
• /
• 2013

Pounding damage has been observed frequently in major earthquakes in the form of aesthetic, minor or major structural cracks and collapse of buildings. Studies have identified a building located at one end of a row of buildings as very vulnerable to pounding damage, while buildings in the interior of the same row are assumed to be safer. This study presents the results of a shake table investigation of pounding between two and three buildings in a row. Two steel portal frames, one stiffer and another more flexible, were subjected to pounding against a frame with eight other configurations. Three pounding arrangements were considered, i.e., the reference frame (1) on the right of the second frame, (2) in the middle of two identical frames, and (3) on the right of two identical frames. Zero seismic gap was adopted for all tests. Five different ground motions are applied from both directions (right to left and left to right). The amplification of the maximum deflection due to pounding was calculated for each configuration. The results showed that, for the stiffer building in a row, row building pounding is more hazardous than pounding between only two buildings. The location of the stiffer frame, whether at the end or the middle of the row, did not have much effect on the degree of amplification observed. Additionally, for all cases considered, pounding caused less amplification for stronger ground motions, i.e., the ground motions that produced higher maximum deflection without pounding than other ground motions.

• ETRI Journal
• /
• 제23권4호
• /
• pp.158-167
• /
• 2001

We examine the diffusion layers of some block ciphers referred to as substitution-permutation networks. We investigate the practical and provable security of these diffusion layers against differential and linear cryptanalysis. First, in terms of practical security, we show that the minimum number of differentially active S-boxes and that of linearly active S-boxes are generally not identical and propose some special conditions in which those are identical. We also study the optimal diffusion effect for some diffusion layers according to their constraints. Second, we obtain the results that the consecutive two rounds of SPN structure provide provable security against differential and linear cryptanalysis, i.e., we prove that the probability of each differential (resp. linear hull) of the consecutive two rounds of SPN structure with a maximal diffusion layer is bounded by $p^n(resp.q^n)$ and that of each differential (resp. linear hull) of the SDS function with a semi-maximal diffusion layer is bounded by $p^{n-1}(resp. q^{n-1})$, where p and q are maximum differential and linear probabilities of the substitution layer, respectively.

• 전자공학회논문지B
• /
• 제31B권7호
• /
• pp.170-178
• /
• 1994

The nearest neighbor classification rule is widely used because it is not only simple but the error rate is asymptotically less than twice Bayes theoretical minimum error. But the method basically use the whole training patterns as the reference vectors. so that both storage and classification time increase as the number of training patterns increases. LVQ(Learning Vector Quantization) resolved this problem by training the reference vectors instead of just storing the whole training patterns. But it is a heuristic algorithm which has no theoretic background there is no terminating condition and it requires a lot of iterations to get to meaningful result. This paper is to propose a new training method of the reference vectors. which minimize the given error function. The nearest neighbor network,the network version of the nearest neighbor classification rule is proposed. The network is funtionally identical to the nearest neighbor classification rule is proposed. The network is funtionally identical to the nearest neighbor classification rule and the reference vectors are represented by the weights between the nodes. The network is trained to minimize the error function with respect to the weights by the steepest descent method. The learning algorithm is derived and it is shown that the proposed method can adjust more reference vectors than LVQ in each iteration. Experiment showed that the proposed method requires less iterations and the error rate is smaller than that of LVQ2.

• 대한전자공학회논문지SD
• /
• 제41권1호
• /
• pp.21-28
• /
• 2004

본 논문에서는 전기 잡음과 장기 계측이 어려운 스트레인 게이지 센서의 단점을 보완하기 위하여 FBG 광섬유 센서를 사용하여 저속용 축중기를 개발하였고 현장에 축중 시스템에 적용하여 실험하였다. 각기 다른 브라그 파장을 갖는 FBG 센서로부터 반사되는 파장 변화를 이 센서들과 동일한 FBG 필터들을 사용하여 빛의 강도로 변화시켜 차량의 무게를 측정하였다. 광원의 광전력과 온도 변화를 보상을 하였으며 잡음의 영향을 감소시키기 위해 위해 lock-in 증폭기를 사용하였다. 모의 실험을 통해서 차량의 하중인가 위치에 관계없이 동일하게 축중이 측정되는 구조의 설계가 가능하였다. 현장 실험을 통하여 실제차량 축중 측정에 대한 선형성과 재현성을 확인하였다.

• Earthquakes and Structures
• /
• 제12권3호
• /
• pp.263-270
• /
• 2017

In this study, two geometrically identical multi-storey steel buildings with different lateral load resisting systems are structurally analyzed under same earthquake conditions and they are compared with respect to their construction costs of their structural systems. One of the systems is a steel structure with eccentrically steel braced frames. The other one is a RC wall-steel frame system, that is a steel framed structure in combination with a reinforced concrete core and shear walls of minimum thickness that the national code allows. As earthquake resisting systems, steel braced frames and reinforced concrete shear walls, for both cases are located on identical places in either building. Floors of both buildings will be of reinforced concrete slabs of same thickness resting on composite beams. The façades are assumed to be covered identically with light-weight aluminum cladding with insulation. Purpose of use for both buildings is an office building of eight stories. When two systems are structurally analyzed by FEM (finite element method) and dimensionally compared, the dual one comes up with almost 34% less cost of construction with respect to their structural systems. This in turn means that, by using a dual system in earthquake zones such as Turkey, for multi-storey steel buildings with RC floors, more economical solutions can be achieved. In addition, slender steel columns and beams will add to that and consequently more space in rooms is achieved.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권3호
• /
• pp.352-357
• /
• 2016

An investigation of ribbed divergent channel was undertaken to determine the effect of rib pitch to height ratio on total friction factor and heat transfer results in the fully developed regime. The ribbed divergent rectangular channel with the channel exit hydraulic diameter ($D_{ho}$) to inlet channel hydraulic diameter ($D_{hi}$) ratio of 1.16 with wall inclination angle of 0.72 deg, at which the ratios (p/e) of 6,10, and 14 are considered. The ribbed straight channel of $D_{ho}/D_{hi}=1.0$ were also used. The ribbed divergent wall is manufactured with a fixed rib height (e) of 10 mm and the ratio of rib spacing (p) to height 6, 10, and 14. The measurement was run with range of Reynolds numbers from 24,000 to 84,000. The comparison shows that the ratio of p/e=6 has the greatest thermal performance in the divergent channel under two constraints; identical mass flow rate and identical pressure drop.

• Journal of Radiation Protection and Research
• /
• 제8권1호
• /
• pp.33-37
• /
• 1983

물 또는 콘크리트반사체(反射體)의 두께 및 콘크리트반사체(反射體)와 핵물질용액계(核物質溶液系) 사이의 간격에 따라 변(變)하는 유효증배계수(有效增倍係數)로서의 반사효과(反射效果)를 중성자수송이론(中性子輸送理論)에 기초를 둔 각분할방법(角分割方法)의 전산코드 ANISN으로 계산하였다. 그 결과에 따르면 반사체(反射體)의 두께가 엷을 때, 유효증배계수(有效增倍係數)를 기준으로 한 물 반사체(反射體)의 반사효과(反射效果)는 콘크리트에서보다 크지만 그 두께가 커지면 반대현상도 생기는 것 같았다. 한편 핵물질용액계(核物質溶液系)와 콘크리트반사체(反射體)사이에 물이 채워져 있고 그 간격변화에 따라 산출한 유효증배계수치(有效增倍係數値)는 처음 급격하게 감소하다가 약 15cm를 지나면서부터 서서히 감소하는 것 같았다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2001년도 추계학술발표대회
• /
• pp.652-655
• /
• 2001

The comparative study of enzymes that catalyze a similar reactions but have different substrate spectrum and/or stereospecificity is a powerful approach to understanding the reaction mechanism between the relative enzymes, and it was also an useful tool to cloning the related enzyme, without the typical cloning from DNA library of genomic pools. For this purpose, we conducted an approach that the comparison at the molecular and protein level of esterases, from various sources including a previously identified (S)-stereospecific esterase of Pseudomonas sp. ES1. As expected, we found an esterase family genes that shared a high similarity at the protein and genetic level in the identical genus Pseudomonad. The striking structural and biochemical identity strongly suggested the family genes to be an identical one. We, hence, aligned the family genes and designated a degenerated primer for PCR-cloning using six Pseudomonas strains as templates. As a result, a recombinant esterase from Pseudomonas fluorescens KCTC 1767 was cloned and high-level expressed with high selectivity to (R,S)-ketoprofen ethyl ester. The enzyme exhibited a high ester-hydrolyzing activity to (S)-ketoprofen but did not hydrolyzed the opposite stereoisomer. Further characteristics were discussed in our presentation.

• 말소리와 음성과학
• /
• 제8권4호
• /
• pp.71-78
• /
• 2016

The purpose of this study is to investigate the effect of Japanese(L1) on the production of Korean accentual phrases(L2). Korean and Japanese have a similar prosodic structure. But different from Korean, Japanese is a pitch accent language. So each word has its own pitch accent. And pitch accents are maintained in the sentence intonation. This difference will have a negative influence on the production of Korean sentence intonation. For this study 4 Korean natives speakers and 10 advanced Japanese learners of Korean participated in the production test. The material analysed constituted 11 Korean sentences, six of which contain formally identical Sino-Korean and Sino-Japanese words. The results show that the initial pitch pattern of Korean accentual phrases was affected by Japanese pitch accent types and this interference was greater for formally identical Sino-Korean and Sino-Japanese words. But besides initial tones of accentual phrase, some positive interference was observed in the internal tonal pattern of accentual phrase. In the phonetic realization, the internal pitch range and initial pitch rising of accentual phrases was greater for Japanese learners of Korean than native speakers of Korean.

• Journal of applied mathematics & informatics
• /
• 제34권1_2호
• /
• pp.75-84
• /
• 2016

The objective of this work is to perform a geometric analysis of the net present value (NPV) and Internal Rate of Return (IRR), defining analytics and in verifying the relationship between geometric properties of such functions. For this simulation, was used the values of the cash flows for each period identical and equal to US$ 200.00 cash, the initial investment US$ 1,000.00 and investments of each identical and equal to US$ 50.00 period. In addition, the discount rate and time were considered a maximum of 2 years (24 months) at a rate between 0 and 100%. The geometric analysis of the characteristics obtained from the expressions of the Net Present Value and Internal Rate of Return possible to observe that besides the analytical dependence between these quantities , the geometric relationships are relevant when studied in relation to the zero NPV and expressed a great contribution the sense of a broad vision for the administrator in the analysis of analytical variables that in uences the balance sheet of the company.