• The Korean Journal of Ceramics
• /
• v.4 no.2
• /
• pp.146-150
• /
• 1998

The total conductivity and oxygen permeation in (Ce1-xZrxO2)0.9(CaO)0.1 solid solutions were measure das a function of temperature and oxygen partial pressure. Empirically, σ at given x and T was expressed essentially by σ=σo2+σeo Po2-1/4, where σo2 and σeo are constant. Applying a standard defect model in which major defects are Cace", Cece' and Vo in ideal solution, we can assign σo2 as the oxide ion conductivity decreases while the electronic conductivity increases with the increase in Zr content. Using the oxide ion and electronic conductivities thus determined, the oxygen permeation flux was calculated for respective Po2 and T conditions at which the measurements were made. The calculated values were found to agree with the observed ones.

• Journal of Korean Institute of Industrial Engineers
• /
• v.38 no.1
• /
• pp.25-30
• /
• 2012

Desirability approaches have been proposed to find an optimum of multiple response problem. The existing desirability approaches use either of mean or min of individual desirability in aggregation of multiple responses. However, in order to find an optimum having high mean and low dispersion among individual desirability, the dispersion needs to be simultaneously considered with its mean. This study proposes bias and variance (BV) method which aggregates bias (ideal target-mean) and variance of individual desirability in multiple response optimization. The proposed BV method was applied to an example to evaluate its usefulness by comparing with existing methods. Evaluation results showed that the solution of BV method was a fairly good compared with DS (Derringer and Suich, 1980) and KL (Kim and Lin, 2000) methods. The BV method can be utilized to multiple response surface problems when decision makers want to find an optimum having high mean and low variance among responses.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.23 no.4
• /
• pp.87-96
• /
• 1998

Using the concept of cellular manufacturing systems(CMS) in job shop manufacturing system is one of the most innovative approaches to improving plant productivity. However. several constraints in machine duplication cost, machining capability, cell space capacity, intercell moves and exceptional elements(EEs) are main problems that prevent achieving the goal of maintaining an ideal CMS environment. Minimizing intercell part traffics and EEs are the main objective of the cell formation problem because it is a critical point that improving production efficiency. Because the intercell moves could be changed according to the sequence of operation, it should be considered in assigning parts and machines to machine ceil. This paper presents a method that eliminates EEs under the constraints of machine duplication cost and ceil space capacity attaining two goals of minimizing machine duplications and minimizing intercell moves simultaneously. Developing an algorithm that calculates the machine duplications by cell-machine incidence matrix and part-machine Incidence matrix, and calculates the exact intercell moves considering the sequence of operation. Based on the number of machine duplications and exact intercell moves, the goal programming model which satisfying minimum machine duplications and minimum intercell moves is developed. A linear programming model is suggested that could calculates more effectively without damaging optimal solution. A numerical example is provided to illustrate these methods.

• Smart Structures and Systems
• /
• v.21 no.1
• /
• pp.123-137
• /
• 2018

Structural monitoring is the most important part of the construction and operation of the embankment dams. Appropriate instruments selection for dams is vital, as inappropriate selection causes irreparable loss in critical condition. Due to the lack of a systematic approach to determine adequate instruments, a framework based on three comparable Multi-Attribute Decision Making (MADM) methods, which are VIKOR, technique of order preference by similarity to ideal solution (TOPSIS) and Preference ranking organization method for enrichment evaluation (PROMETHEE), has been developed. MADM techniques have been widely used for optimizing priorities and determination of the most suitable alternatives. However, the results of the different methods of MADM have indicated inconsistency in ranking alternatives due to closeness of judgements from decision makers. In this study, 9 criteria and 42 geotechnical instruments have been applied. A new method has been developed to determine the decision makers' importance weights and an aggregation method has been introduced to optimally select the most suitable instruments. Consequently, the outcomes of the aggregation ranking correlate about 94% with TOPSIS and VIKOR, and 83% with PROMETHEE methods' results providing remarkably appropriate prioritisation of instruments for embankment dams.

• Journal of Powder Materials
• /
• v.23 no.3
• /
• pp.221-227
• /
• 2016

Waste oyster shells create several serious problems; however, only some parts of them are being utilized currently. The ideal solution would be to convert the waste shells into a product that is both environmentally beneficial and economically viable. An experimental study is carried out to investigate the recycling possibilities for oyster shell waste. Bulk ceramic bodies are produced from the oyster shell powder in three sequential processes. First, the shell powder is calcined to form calcium oxide CaO, which is then slaked by a slaking reaction with water to produce calcium hydroxide $Ca(OH)_2$. Then, calcium hydroxide powder is formed by uniaxial pressing. Finally, the calcium hydroxide compact is reconverted to calcium carbonate via a carbonation reaction with carbon dioxide released from the shell powder bed during firing at $550^{\circ}C$. The bulk body obtained from waste oyster shells could be utilized as a marine structural porous material.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1998.10a
• /
• pp.263-266
• /
• 1998

Several constraints in machine duplication cost, machining capability, cell space capacity, intercell moves and exceptional elements(EEs) are main problems that prevent achieving the goal of ideal Cellular Manufacturin System (CMS) environment. Minimizing intercell part traffics and EEs are the main objective of the cell formation problem as it's a critical point that improving production efficiency. Because the intercell moves could be changed according to the sequence of operation, it should be considered in assigning parts and machines to machine cells. This paper presents a method that eliminates EEs under the constraints of machine duplication cost and cell space capacity attaining two goals of minimizing machine duplications and minimizing intercell moves simultaneously. Developing an algorithm that calculates the machine duplications by cell-machine incidence matrix and part-machine incidence matrix, and calculates the exact intercell moves considering the sequence of operation. Based on the number of machine duplications and exact intercell moves, the goal programming model which satisfying minimum machine duplications and minimum intercell moves is developed. A linear programming model is suggested that could calculates more effectively without damaging optimal solution. A numerical example is provided to illustrate these methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6514-6520
• /
• 2013

Arcology (architecture plus ecology) is a new term that was coined by the visionary architect, Paolo Soleri (1919-2013), and aims to provide a useful solution for a sustainable dense urban environment. Inspired by the environmental and humanistic crisis in the 1970s, he continuously promoted ideal future city forms with arcology in mind. Arcosanti is one of the many arcologies he proposed and is the only one that was constructed. This paper constructs arcology as a sustainable architectural theory with Arcosanti as a verifiable case study. Despite the fact that arcosanti is only partially built, and far from completion, it still possesses some of the values that Soleri's vision may offer to future generations.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.4
• /
• pp.71-78
• /
• 1998

Gum is known as natural polymer. Biodegradable films were prepared by solution blend method in the weight ratio of natural gums(Xanthan, Locust bean, Guar) for the purpose of useful bioimplants. The possibility of bioimplants, which prepared from natural gums as a skin substitute was evaluated by measuring biodegradability. This biodegradable films were inserted in the back of rats and their of biodegradability were investigated by hematological change evaluation as a function of time to the biotransformation. Rats implantation test results showed that Guar induced increments of monocyte and basophil after 48 hours of implantation. And Locust bean showed increase of monocyte and neutrophile counts after 48 hours of implantation. And Xanthan induced decrease of monocyte and neutrophile at 24 hours after implantation. Guar and Locust showed high hemoglobin contents and hematocrit after 48 hours of implantation. Guar and Locust induced some suspects of incompatibility in the tissue after 48 hours, but three were little effects to the skin inflammation at 24 hours. These values of biodegradable films, which prepared from prepared from natural gums measured in this were some satisfiable results at short period with those of ideal skin bioimplants.

• Resources Recycling
• /
• v.27 no.5
• /
• pp.9-13
• /
• 2018

The equilibrium constant of a chemical reaction is related to the standard Gibbs free energy change. Since equilibrium constant is defined as the ratio of the activities of the chemical species, it is necessary to consider the non-ideal behavior of the solutes as ionic strength of the solution increases. In this paper, the derivation of Debye-$H{\ddot{u}}ckel$ limiting law and its modification by which the activity coefficient of an ion can be calculated was explained. Moreover, the method to obtain the activity coefficient of an ion from the experimentally determined mean activity coefficients of an electrolyte was explained.

• Tribology and Lubricants
• /
• v.30 no.1
• /
• pp.1-8
• /
• 2014

In this study, a three-pad gas foil journal bearing with a diameter of 40 mm and an axial length of 35 mm was modeled to predict the static and dynamic performances with regard to an increasing mechanical preload. The Reynolds equation for an isothermal and isoviscous ideal gas was coupled with a simple elastic foundation foil model to calculate the hydrodynamic pressure solution iteratively. In the prediction results, the journal eccentricity, journal attitude angle, and minimum film thickness decreased, but the friction torque increased with the preload. A quick comparison implied a lower load capacity but higher stability for a three-pad gas foil bearing compared to a one-pad gas foil journal bearing. The direct stiffness coefficients increased with the preload, but the cross-coupled stiffness coefficients decreased. The direct damping coefficient increased in the horizontal direction but decreased in the vertical direction as the preload increased. These model predictions will be useful as a benchmark against experimental test data.