• The Transactions of The Korean Institute of Electrical Engineers
• /
• 제65권1호
• /
• pp.81-87
• /
• 2016

An LCL-type Isolated dc-dc converter operating for constant output voltage is analyzed, including the effect of a high frequency transformer using ac complex circuit approximation. Its solution is derived and is used to obtain the characteristics of the proposed converter. The analyses show through converter modeling, phasor diagram and gain comparison that inclusion of a high frequency transformer results in introduction of magnetizing inductance and leakage inductances at conventional LCL dc-dc converter with ideal transformer. The theoretical and simulation results are presented in case of the wide variations in input voltage and load current in detail. Analysis and simulation results observed that introduction of a transformer in the dc-dc converter had considerable effect on the performance, especially in the case of low output voltage and large load.

• Journal of Electrochemical Science and Technology
• /
• 제7권1호
• /
• pp.1-12
• /
• 2016

The production of oxygen and hydrogen from solar water splitting has been considered to be an ultimate solution for energy and environmental issues, and over the past few years, nano-sized semiconducting metal oxides alone and with graphene have been shown to have great promise for use in photocatalytic water splitting. It is challenging to find ideal materials for photoelectrochemical water splitting, and these have limited commercial applicability due to critical factors, including their physico-chemical properties, the rate of charge-carrier recombination and limited light absorption. This review article discusses these main features, and recent research progress and major factors affect the performance of the water splitting reaction. The mechanism behind these interactions in transition metal oxides and graphene based nano-structured semiconductors upon illumination has been discussed in detail, and such characteristics are relevant to the design of materials with a superior photocatalytic response towards UV and visible light.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.37-40
• /
• 2001

This paper describes the selection and evaluation of RP processes. Major rapid prototyping processes such as SLS, SLA, FDM and LOM, which are wide spread in use are selected. A test part, which includes various primitives, is designed in order to evaluate these RP processes. Measurement of the test part is automated by using a CMN program. To visualize and analyze measured data, Microsoft Access and Visual C++ are used. Also, from measured data obtained, TOPSIS, one of the decision making methods, and Shannon Entropy is used to select an appropriate RP process for specific application.

• Journal of the Korean Society for Library and Information Science
• /
• 제39권4호
• /
• pp.163-175
• /
• 2005

I identified constructivism's teaching-learning theory as a modern ideal method of education on this paper. And I explained how school media center relate with constructivism on educational method and educational environment. I suggested what is the points of development of school media center under the educational method of constructivism. And then by doing so I strived for contribution to the solution of problems of school education in Korea.

• Structural Engineering and Mechanics
• /
• 제21권4호
• /
• pp.469-494
• /
• 2005

In order to consider the modified seismic response of framed structures in the presence of masonry infills, proper models have to be formulated. Because of the complexity of the problem, a careful definition of an equivalent diagonal pin-jointed strut, able to represent the horizontal force-interstorey displacement cyclic law of the actual infill, may be a solution. In this connection the present paper, continuing a previous work in which a generalised criterion for the determination of the ideal cross-section of the equivalent strut was formulated, analizes some models known in literature for the prediction of the lateral cyclic behaviour discussing their field of validity. As a support of the discussion, the results of an experimental investigation involving single story-single bay infilled reinforced concrete. Frames under vertical and lateral loads with different kind of infill (actually not yet so much investigated) are presented. Finally, an improvement of a model known in the literature is proposed, taking the results of the experimental tests before mentioned into account.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.274-277
• /
• 2003

Millimeter-wave networking is composed of narrow beam link. High directivity of the beam provides either advantage or disadvantage in comparison with conventional wide-lobe microwave communications. In such networks, it is very substantial that beam connecting point to point is fixed in right direction. It is major requirement in the beam network to keep the beam in best direction. In this paper, We propose the method to find a best suited direction of the antenna's beam using the Genetic Algorithm in point-to-point link. Proposed method presume that each station knows his direction $\theta$$_1$,$\theta$$_2$ at every step of Genetic Algorithm, then it can be expected that GA is possible to search the ideal solution. Intensity of the received signal is evaluated by the multiplication of lengths to the point which the lobe meets with the horizontal line.

• Culinary science and hospitality research
• /
• 제11권2호
• /
• pp.14-31
• /
• 2005

The findings of the study would be valuable for the basis of marketing strategies to be implemented in the foodservice industry. As a result of the exploratory factor analysis, major consumer dissatisfaction factors identified in this study can be categorized based on the followings: food, service, and facilities. It appears that most preferred medium for unsatisfied consumers to file their employees how to cope with complaints on the Internet. In terms of psychological compensation, it appears that consumers need to be provided with a through explanation in addition to a heartfelt apology against a complaint. On the physical side of compensation solution for everybody. The ideal timing of compensation for complaints can vary but it would be appropriate to leave it up to consumers to choose when they want to be rewarded.

• The Journal of Information Systems
• /
• 제12권2호
• /
• pp.109-128
• /
• 2003

This study is intended to suggest an ideal direction of the information systems policy for the local small business firms. In an effort to accomplish this objective, this paper tried to identify the current states of the information systems and measure the level of the information systems of local small business firms based on the maturity stage and the development level. The study then explored the evidence how the maturity stage and the development level affect the business performance of the local small business firms. The research found out that the organizational factor such as the support of CEO and the financial factor such as IS investment took major roles to improve the business performance. Based on the research findings of this study, the paper suggested the desirable solution of the information system policy to deal with the problems the local small business firms need to overcome.

• Journal of Power Electronics
• /
• 제13권4호
• /
• pp.507-515
• /
• 2013

This paper presents an isolated bidirectional dc/dc converter based on primary parallel isolated boost converter (PPIBC). This topology is an efficient solution in low voltage high power applications due to its ability to handle high currents in the low voltage side. In this paper, the converter has been modeled using non-ideal components and operated without any additional circuitry for startup using a digital soft-start procedure. Simulated and measured loop gains have been compared for the validity of the model. On-the-fly current direction change has been achieved with a prototype interconnecting two battery banks. A second prototype has been constructed and tested for supercapacitor operation in constant power charge mode.

• International Journal of Automotive Technology
• /
• 제8권1호
• /
• pp.83-91
• /
• 2007

Nowadays, the increasing global competition forces manufacturing enterprises to apply new technologies such as laser welding to manufacturing of their products. In case of automotive industries, they interest in assembly system for BIW (Body in White) carrying out laser welding. In this paper, the method of implementation for digital laser welding assembly system is proposed. Based on the requirements of assembly tasks obtained through product analysis, process modeling is executed by using the IDEF0 and UML model. For digital assembly system, the selected components are modeled by using 3D CAD tools. According to the system configuration strategy, lots of the alternative solutions for the assembly system of welding side panels are generated. Finally, the optimal laser welding system is chosen by the evaluation of the alternative solutions with TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) method.