• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1761-1766
• /
• 2004

Recently, Plastic optical products are widely used. Injection molding process has advantages of low cost and high productivity. However, it remains a residual birefringence and residual stress by difference cooling. The present study focused on measuring birefringence in optical plastic parts using interference color pattern. The main idea of an analysis comes from chromatic aberration which is caused by difference light wavelengths. As a result, a complete system measuring the high order 2-D birefringence pattern was built. Further investigation is under way to improve the accuracy of birefringence measurement system by diode laser.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.115-120
• /
• 2006

This article propose a new idea of developing a hybrid scheme to achieve faster INS alignment with higher accuracy using a novel procedure to estimate the initial attitude angles that combines a Kalman filter and Adaptive Neuro-Fuzzy Inference System architecture. A tactical grade inertial measurement unit was applied to verify the performance of proposed scheme in this study. The preliminary results indicated the outstanding improvements in both time consumption for fine alignment process and accuracy of estimated attitude angles, especially in heading angles. In general, the improvement in terms of time consumption and the accuracy of estimated attitude estimated accuracy reached 80% and 70% respectively during alignment process after compensating the attitude angles estimated by an extended Kalman filter with 15 states using proposed approach. It is worth mentioned that the proposed approach can be implemented in general real time navigation applications.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1427-1429
• /
• 2003

In our contribution, the new idea of parking/moving discrimination is proposed by using Three Line Scanner Imagery. The framework of our study consists of three main stages: preprocessing, vehicle detection and parking/moving detection respectively. First two stages of framework have been done in our previous work. Parking/ Moving Discrimination algorithm have been developed by using generic vehicle characteristics and some principle of photogrammetry. By using detected vehicles from our previous work, stopping/moving vehicles are able to discriminate. Moving vehicle is detected by detecting generic moving vehicle in TLS, inter-band gap. Stopping vehicle is verified by 3 dimensional viewing of Stereoscopic measurement. Finally, the conceptual framework has been done and the result will been realized soon.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.637-642
• /
• 1995

For measuring the error motion of ultra-precision spindle, eliminating the geometric errors is a must. Unless it is achieved, geometric errors will be dominant in data. Here, the roundness error and alignment error between spindle and sensor are to be removed. That's because typical error range of such spindle is muchless than geometric one. A capacitive transducer of cylidricalshape was developed, which takes full advantage of the spatial-averaging effect by using large area compared tpo the geometric error. This idea was first proposed by Chapman and here it is modified for better performance with nomical gap of 50 .mu. m and with newly designed guards which encompass the respective sensor to rectify the electrical field distribution in good shape. The measurement system is made to get the orbit of Ultra-Precision Air Spindle which is supposed to have its runout under 1 .mu. m. The Calibration data of this sensor is presented and the spindle orbit from 2000rpm to 5500rpm is showed. It is quite reasonable to use this sensor in the range of 60 .mu. m with an accuracy of several tens of nm.

• 한국항행학회논문지
• /
• 제7권1호
• /
• pp.71-81
• /
• 2003

본 논문에서 등간격 선형 어레이로 입사하는 다중 인코히어런트 간섭 신호를 효율적으로 줄이기 위한 새로운 빔형성 기법을 제안한다. 제안된 알고리듬의 기본개념은 잡음과 간섭이 존재하는 신호로부터 행렬 특성매핑을 이용하여 원하는 신호를 복원하는 과정을 연속적으로 시행하는 것이다. 제안된 빔형성기법이 기존 LCMV 빔형성기보다 우수한 성능을 제공한다는 것을 컴퓨터 시뮬레이션을 통하여 보여주었다.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제24권2호
• /
• pp.83-109
• /
• 2021

In the early stage of lesson enactment process, teachers use textbooks and other resources to select tasks and activities. It follows that discrepancies between textbooks and research-recommended pathways for learning may lead to concerns or issues with pacing in the classroom. To explore this idea further, this study examined the alignment between three popular standards-aligned textbooks series and volume learning trajectories. The results indicated that the standards-based textbooks examined may lack attention to important topics in the pacing of volume instruction, and suggest the need to inform both pre-service and in-service teachers about the gap between textbook lessons and volume learning trajectories so that they will be able to reflect students' thinking in volume learning trajectory to their lessons.

• Computers and Concrete
• /
• 제28권6호
• /
• pp.605-619
• /
• 2021

Building Information Modeling (BIM) models are a powerful tool for preserving and using architectural history. Manually creating information models for such a significant number and variety of architectural monuments as Dong drum towers is challenging. The building logic based on "actual measurement construction" was investigated using the metamodel idea, and a metamodel-based automated modeling approach for the wood framework of Dong drum towers was presented utilizing programmable algorithms. Metamodels of fundamental frame kinds were also constructed. Case studies were used to verify the automated modeling's correctness, completeness, and efficiency using metamodel. The results suggest that, compared to manual modeling, automated modeling using metamodel may enhance the model's integrity and correctness by 5-10% while also reducing time efficiency by 10-20%. Metamodel and construction logic offer a novel way to investigate data-driven autonomous information-based modeling.

• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.4231-4235
• /
• 2022

Considering the importance of deuterium in nuclear science including medical and industrial researches such as (BNCT) and nuclear reactors respectively, it is important to study various possible ways in addition to common methods for measuring its concentration. This study is an effort to measure deuterium concentration using PGNAA. The main idea is to calculate the area under 2.23 MeV gamma-rays photo peak resulting from neutron collision with Hydrogen atoms which are in mix with deuterium in samples. The study carried out by both simulation and experiment. Monte Carlo MCNPX2.6 code has been used for simulation and based on its acceptable results an experimental setup has been arranged. The coordination of results was in the range of R = 0.99 and R = 0.98 in simulation and experiment respectively. The accuracy of the study has been investigated by measuring the concentration of an unknown sample by both PGNAA and Fourier transform infrared spectroscopy (FT-IR) methods in which there were acceptable correlation between these two methods.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1613-1620
• /
• 1990

본 연구에서는 일반적인 레이저 유속계를 사용하여 광전 증폭관내에 핀흘 대 신에 슬릿(slit)을 장치하고 광전증폭관을 측정영역에 90˚가 되도록 설치하여 in-situ calibration을 수행함으로써 분무의 입경과 속도를 동시에 계측할수 있다는 Yoon의 결과를 이용하고 모든 입자들의 궤적은 동일한 확률을 갖는다는 Yule와 Holve, Self의 가정을 기초로한 수학적인 Deconvolution에 의하여 계측방법에 발생되는 모순 점을 해결하였다. 일반적으로 분무특성해석을 위해서는 분무를 지배하는 기하학적인 변수, 입경분포, 액적의 속도분포, 밀도분포, 입경과 속도의 상관계수, 입자의 증발율 등이 규명 되어야하는데 본 연구에서는 이상류 동축노즐을 제작하고 이의 분무특성을 해석하기위하여 액적의 속도분포, 입경분포, 입경과 속도의 상관계수, 수밀도분포 등 을 계측하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제7권6호
• /
• pp.313-318
• /
• 2006

This paper introduces a partial discharge (PD) severity metric, S, based on the evaluation of time-sequence PD data capture and resulting Time-Sequence-Analysis Discharge (TSAD) level distributions. Basically based on an IEC60270 measurement technique, each PD event is time stamped and the discharge level noted. By evaluating the time differences between a previous and subsequent discharge, a 3D plot of time-sequence activity and discharge levels can be produced. From these parameters a measurement of severity, which takes into account dynamic or instantaneous variations in both the time of occurrence and the level of discharge, rather than using standard repetition rate techniques, can be formulated. The idea is to provide a measure of the severity of PD activity for potentially measuring the state of insulation within an item of plant. This severity measure is evaluated for a simple point-plane geometry in $SF_{6}$ as a function of gap distance and applied high voltage. The results show that as the partial discharge activity increases, the severity measure also increases. The importance of future investigations, quantifications and evaluations of the robustness, sensitivity and importance of such a severity measurement, as well as comparing it with typical repetition rate assessment techniques, and other monitoring techniques, are also very briefly discussed.