• Journal of computational fluids engineering
• /
• v.17 no.2
• /
• pp.53-57
• /
• 2012

Design of the cooling channels of a plastic injection mold affects the quality and the productivity of the injection processes. In the injection process, the melted resin with high temperature enters the mold cavity, and just after the cavity is filled the heat should be dissipated through the cooling channels simultaneously. The purpose of this study is to analyse the heat transfer phenomenon and to estimate the temperature distribution in the mold to evaluate the cooling effect of the channels. The injection mold is assumed to have cooling channels of circular cross section and each channel has the same coolant flow rate. and The cavity has a rectangular shape. The results show that as the cooling channels get closer to the cavity surface, the cooling efficiency increases as might easily be guessed. However, due to the final hot resin flow from the gate an intensive cooling is required in that region.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.12
• /
• pp.1985-1990
• /
• 2020

Objective: The objective of this experiment was to investigate the effects of fat-soluble vitamin injection on plasma and tissue vitamin status in nursery pigs. Methods: A total of 16 pigs (initial body weight: 7.15±1.1 kg) were allotted to 2 treatments at d 7 post-weaning. Pigs were fed a corn-soybean meal-based basal diet with no supplemental vitamin A and i.m. injected with 300,000 IU of retinyl palmitate, 900 IU of d-α-tocopherol and 30,000 IU of vitamin D₃ with control pigs having no vitamin injection. Blood (d 0, 3, 7, and 14 post-injection) and tissue samples (liver, brain, heart, lung, and muscle; d 7 and 14 post-injection) were collected from pigs. Retinyl palmitate, retinol, and α-tocopherol concentrations were analyzed in plasma and tissues, while plasma was assayed for 25-hydroxycholecalciferol (25-OHD₃). Results: Plasma retinol and 25-OHD₃ concentrations increased by the vitamin injection from d 3 to 14 post-injection (p<0.05) whereas plasma retinyl palmitate was detected only in the vitamin treatment at d 3 and 7 post-injection (115.51 and 4.97 ㎍/mL, respectively). Liver retinol, retinyl palmitate, and retinol+retinyl palmitate concentrations increased by retinyl palmitate injection at d 7 and 14 post-injection (p<0.05) whereas those were not detected in the other tissues. The d-α-tocopherol injection increased α-tocopherol concentrations in plasma at d 3 and 7 post-injection (p<0.05) and in liver, heart (p<0.10), and muscle (p<0.05) at d 7 post-injection. Conclusion: Fat-soluble vitamin injection increased plasma status of α-tocopherol, retinol, retinyl palmitate and 25-OHD₃. As plasma levels decreased post-injection, vitamin A level in liver and vitamin E level in muscle, heart and liver increased. The α-tocopherol found in plasma after injection was distributed to various tissues but retinyl palmitate only to the liver.

• Korean Journal of Animal Reproduction
• /
• v.18 no.2
• /
• pp.101-104
• /
• 1994

The purpose of the present study was to examine the in vivo activity of oxytocin antagonist I (AI)in the nonpregnant estrous rat. Cannulas were placed in the jugular vein for infusing compounds and a water-filled balloon-tipped cannula placed in one uterine horn for assessing uterine activity. Uterine contractions were monitored with a Grass Polygraph and contractile activity determined as the integrated area for 10 minutes. Five minutes after infusing 5 ${\mu}\textrm{g}$ of AI, 100mU of oxytocin was given as an in bolus injection and repeated every hour for 5 hours. At five minutes, 1 and 2 hours after injection AI the uterine contractile response to 100 mU of oxytocin was significantly inhibited compared to controls(p<0.05). At 3, 4 and 5 hours no differences in response were detected compared to controls(p>0.05). These results in conjunction with other reports from our laboratory suggest that AI has the potential of being a potent and specific tocolytic for prevention of preterm labor in humans.

• Parasites, Hosts and Diseases
• /
• v.40 no.1
• /
• pp.1-7
• /
• 2002

The purpose of treatment for uncomplicated malaria is to produce a radical cute using the combination of: artesunate (4 mg/kg/day) plus mefloquine (8 mg/kg/day) for 3 days; a fixed dose of artemether and lumefantrine (20/120 mg tablet) named $Coartem^{\circledR}$ (4 tablets twice a day for three days for adults weighing more than 35 kg); quinine 10 mg/kg 8-hourly plus tetracycline 250 mg 6-hourly for 7 days (or doxycycline 200 mg as an alternative to tetracycline once a day for 7 days) in patients aged 8 years and over; $Malarone^{\circledR}$ (in adult 4 tablets daily for 3 days). In treating severe malaria, early diagnosis and treatment with a potent antimalarial drug is recommended to save the patient's life. The antimalarial drugs of choice are: intravenous quinine or a parenteral form of an artemisinin derivative (artesunate i.v./i.m. for 2.4 mg/kg followed by 1.2 mg/kg injection at 12 and 24 hr and then daily for 5 days; artemether i.m. 3.2 mg/kg injection followed by 1.6 mg/kg at 12 and 24 hrs and then dialy for 5 days; arteether i. m. ($Artemotil^{\circledR}$) with the same dose of artemether or artesunate suppository (5 mg/kg) given rectally 12 hourly for 3 days. Oral arlemisinin derivatives (artesunate, artemether, and dihydroartemisinin with 4 mg/kg/day) could replace parenteral forms when patients can tolerate oral medication. Oral mefloquine (25 mg/kg divided into two doses 8 hrs apart) should be given at the end of the artemisinin treatment course to reduce recrudescence.

• Korean Journal of Animal Reproduction
• /
• v.10 no.1
• /
• pp.27-35
• /
• 1986

As a preliminary experiment to establish the process on the sexing of mouse embryos by chromosomal analysis, present studies were carried out with inbred (ICR, C57BL) and F1 hybrid [(ICR${\times}$C57BL) = F1 ${\times}$ ICR] mice to investigate the blastomere numbers and mitotic indices (M.I.) to the developmental stage of embryos recovered, the optimum periods of anti-mitotic agent administration, the successful rates of sexing and sex-ratio. The results obtained were summarized as follows: 1. The blastomere numbers (mean${\pm}$S.E.) of the morula and blastocyst were 18${\pm}$0.4 and 54${\pm}$0.7, respectively. 2. Whereas the M.I. of F1 hybrid (16${\pm}$0.2%) was higher than that fo inbred ICR (15${\pm}$0.1%) and C57BL (12${\pm}$0.6%) in the different strains, the morula (7${\pm}$0.6%) was higher than that of blastocyst (6${\pm}$0.4%) in the case of embryo stages. 3. Following to anti-mitotic agents treated, the M.I. of embryos cultured with Colcemid (17${\pm}$1.1%) was superior to that fo embryos cultured with Velban (12${\pm}$0.9%) and the Colcemid injection (7${\pm}$0.4%). 4. The successful rate of sexing in the blastocyst (38.7%; 124/320) was superior to the morula (35.9%; 52/145), and the F1 hybrid (48.1%) was higher than that of inbred ICR (42.4%) and C57 BL (28.2%). 5. In the successful rate of sexing to the methods of administration, the embryos cultured with Colcemid (46.0%) was superior to that of embryos cultured with Velban (39.0%) and the Colcemid injection (38.8%). 6. Of 98 embryos sexed after culture with Colcemid, 89(90.8%) were observed between 2 and 4 hrs. In the case of Velban treatment, 83.1% (74/89) was observed between 2$\frac{1}{2}$ and 4$\frac{1}{2}$ hrs. 7. Out of 761 prepared embryos it was possible to sex 311; 157 were male and 154 were female, i.e.a sex-ratio of 50% a, pp.oximately.

• The Korean Journal of Nuclear Medicine
• /
• v.26 no.1
• /
• pp.116-123
• /
• 1992

$^{123}I$ has ideal half life of 13 hours, suitable 159 keV gamma energy for imaging, and easy labeling methods. In Korea Cancer Center Hospital, $^{123}I$ has been produced by MC-50 cyclotron. The purpose of this study is looking for good labeling condition of $^{123}I$ and $^{99m}Tc$ to nonspecific human polyclonal IgG, and comparing these with $^{67}Ga-citrate$ in the abscess bearing mice. Human polyclonal nonspecific IgG was labeled with 0.2 M phosphate buffer added $^{123}I$ by chloramine T method. Human polyclonat nonspecific IgG was labeled with $^{99m}Tc-gluconate$ after activation with $\beta-mercaptoethanol$. In the abscess bearing mice, the radioactivity in the abscess was higher in 24 hours than 6 hours after injection. In the abscess, $^{123}I$ nonspecific IgG had higher uptake than $^{99m}Tc-IgG\;or\;^{67}Ga-citrate$. There was no significant difference in absecess uptake of $^{123}I-IgG$ among 24, 72, 120 hours abscess age. Further clinical researches with $^{123}I-nonspecific$ IgG, and other immunoscintigraphies using $^{123}I$ are expected.

• The Korean Journal of Zoology
• /
• v.39 no.1
• /
• pp.115-121
• /
• 1996

To investigate gestational profiles in gene expression of placental lactogen I fpL4), PL-lI and Pit-1, RNA samples were extracted from the placentas of pregnant day 12 to 20 at 2 day intervals. Northern blots showed changes in gene expression of PL4, - 11 and Pit-i. Sizes of PL-l and -II mRNA were changed and amounts of PL-I, -H and Pit-1 mRNA increased during progress of gestation. To examine the effect of estrogen on the gene expression of PL-I, -Il and Pit-1, pregnant female rats were ovariectomized (OVX) and daily injected with estradiol (OVX + E). OVX markedly lowered the amount of PL4 and 41 mRNA, and shifted niRNA size from 1 kb to i 3 kb in PL-l mRNA and 0.6 kb to i kb in PL-ll mRNA, respectively. OVX had no effect on the mRNA size of Pit-1, but markedly attenuated Pit-1 mRNA level. Estrogen injection reversed the effect of OVX on the size-shift but not on the amount of PL4 and -Il mRNA. Replacement of E partially recovered OVX-induced inhibition of Pit-i mRNA level. Present results suggest that estrogen may play a pivotal role on the gene expression of PL-l and -Il such as alternative RNA splicing and/or polyadenylation, and Pit-1 may be involved in the gene expression of PL-l and 41 by estrogen.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.769-770
• /
• 2007

• Proceedings of the Korean Magnestics Society Conference
• /
• 2004.06a
• /
• pp.56-56
• /
• 2004

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.9
• /
• pp.1317-1324
• /
• 1998

In general, DI gasoline engine has the advantages of higher power output, higher thermal efficiency, higher EGR tolerance and lower emissions due to the operation characteristics of increased volumetric efficiency, compression ratio and ultra-lean combustion scheme. In order to apply the concept of stratified charge into direct injection gasoline engine, some kinds of methodologies have been adapted in various papers. In this study, a reflector was adapted around the injector nozzle to apply the concept of stratified charge combustion which leads the air-fuel mixture to be rich near spark plug. Therefore, the mixture near the spark plug is locally rich to ignite while the lean mixture is wholly introduced into the combustion chamber. The characteristics of combustion is analyzed with the variations of fuel injection pressure and load in a stratified -charge direct injection single cylinder gasoline engine. The obtained results are summarized as follows ; 1. The MBT spark timing approached to TDC with the increase of load on account of the increase of evaporation energy, but has little relation with fuel injection pressure. 2. The stratification effects are apparent with the increase of injection pressure. It is considered by the development of secondary diffusive combustion and the increase of heat release of same region, but proceed rapidly than diesel engine. Especially, in the case of high pressure injection (l70bar) and high load (3.0kgf m), the diffusive combustion parts are developed excessively and results in the decrease of peak pressure than in the case of middle load. 3. The index of engine stability, COVimep value, is drastically decreased with the increase of load. 4. To get better performance of DI gasoline engine development, staged optimizaion must be needed such as injection pressure, reflector, intake swirl, injection timing, chamber shape, ignition system and so on. In this study, the I50bar injection pressure is appeared as the optimum.