• 공업화학
• /
• 제28권1호
• /
• pp.57-63
• /
• 2017

본 연구에서는 다양한 NCO index에서 물 함량 변화가 자동차용 폴리우레탄 시트 폼 패드의 정적 안락감에 미치는 영향을 알아보았다. 정적 안락감에 영향을 미치는 요인을 파악하기 위해 UTM을 사용한 정하중 특성 시험을 통하여 히스테리시스 곡선을 나타냈으며, 이를 통해 25% 변형 시 경도와 65% 변형 시 경도, hysteresis loop area, hysteresis loss (%), 그리고 Sag factor를 구하였다. 동일한 NCO index에서 물 함량이 증가함에 따라 우레아 결합의 증가로 경도가 증가하고, 가교밀도가 증가하는 경향을 swelling ratio 측정으로 확인하였으며, 이에 따라 복원력은 감소하는 경향을 확인하였다. 또한 표면 경도의 증가로 인해 Sag factor가 감소하는 경향을 확인하였다. 동일한 물 함량에서 NCO index가 증가함에 따라 우레탄과 우레아 결합이 이소시아네이트와 추가 반응하여 가교도와 경도가 증가하고 이에 따라 복원력이 감소함을 확인하였다.

• 전자공학회논문지 IE
• /
• 제46권2호
• /
• pp.18-21
• /
• 2009

에칭법을 이용하여 광섬유 굴절율 센서를 제작하였으며 그의 굴절율 특성을 연구하였다. 굴절율 1.453-1.46 영역에서 우수한 감도를 나타내었으며 측정파장에 의해 동작점이 이동돼었다. 클래딩 두께가 감소할 수록 센서의 감도가 증가하였으며, 감도는 열에 안정된 특성을 나타내었다. 그리고 굴절율의 증감에 따른 히스테리시스가 거의 나타나지 않았다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 E
• /
• pp.1705-1707
• /
• 1997

In this work, a possible new PD de technique, based on the electro-optic effect(P effect), has been proposed. The refractive index ellipsoid of EO crystal, as $LiNbO_3$, is changed by both the externally a electric field and its hysteresis loop of which effect on this hysteresis loop gives rise t discrepancy of index variation. Therefore, an eq regarding the phase variation of modulated beam through $LiNbO_3$ crystal under applied e field, is newly proposed considering the influen hysteresis characteristics. For this purpose generated from needle-plane electrode in oil has detected by use of $LiNbO_3$ cell and analyzed b equation. As a result, it is observed that PD measu phase intervals are limited by the cr characteristics such as asymmertrical P-E hyst and half-wave voltage.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.223-224
• /
• 2005

In this paper, multiple regression analysis of the electrical characteristics for $HfO_2$ thin films grown by metal organic molecular beam epitaxy (MOMBE) was investigated. The electrical properties, such as, the accumulation capacitance and the hysteresis index, are the main factors to determine the characteristics of $HfO_2$ thin films. The input factors on the process are the substrate temperature, Ar gas flow, and $O_2$ gas flow. For statistical analysis, the design of experiments was carried out and the effect plots were used to analyze the manufacturing process. This methodology can predict the electrical characteristics of the thin film growth mechanism related to the process conditions.

• 한국환경생태학회지
• /
• 제38권2호
• /
• pp.178-188
• /
• 2024

산림유역의 부유토사 동태는 토지이용 변화, 산림사업, 산불, 산사태 등의 인위적 또는 자연적 교란에 따라서 다변화될 수 있다. 이러한 측면에서 산림유역의 부유토사 동태를 이해하는 것은 효과적인 수질 관리 대책을 수립하는 데에 중요하다. 이 연구는 부유토사 동태를 해석하기 위한 체계적인 조사 방법을 제안하고자 관측된 유출량-탁도 자료를 토대로 2가지의 이력현상 지수 산정 방법(Lawler의 방법과 Lloyd의 방법)과 5가지 추출 간격(50, 25, 10, 5, 1 퍼센타일)을 고려한 10개 산정기법의 적용성과 성능을 평가하였다. 그 결과, 1 퍼센타일의 추출 간격을 활용한 Lloyd의 방법이 분석 가능한 유출 사상이 가장 많았으며, 성능 역시 가장 뛰어난 것으로 확인되었다. 이 연구의 결과는 이력현상 지수를 활용함으로써 유출량과 부유토사의 이력현상을 정량화할 수 있을 뿐만 아니라 부유토사 동태를 해석하는 데에 유용한 정보를 제공할 수 있음을 시사한다.

• 한국식품영양과학회지
• /
• 제28권6호
• /
• pp.1293-1297
• /
• 1999

Effect of rice protein and lipid on rheological properties of gelatinized rice flour solutions(4%) with three rice varieties(Dongjin, Jinmi, Tamjin) known for varying taste of cooked rice was investigated with Haake viscometer. The rheological behaviors of all rice flour solutions were illustrated by Herschel Bulkley equation and exhibited pseudoplastic behavior with yield stress. When rice flour solutions treated with protease and dithiothreitol, there was decreased in flow behavior index value. Flow behavior index was decreased by dealbumin and deglutelin rice flour solutions among deprotein groups. The Jinmi rice flour solutions exhibited slightly lower consistency index than Dongjin and Tamjin. Defatted rice flour solutions exhibited lower consistency index than rice flour solutions, while dealbumin, deglutelin rice flour solutions exhibited high consistency index. Protease treated rice flour solutions exhibited increase in Dongjin and Tamjin. The yield stress was increased in sequence eating quality. Yield stress of defatted rice flour solutions was decreased, while deglutelin and rice starch flour solutions was increased. The time dependent charac teristics of all rice flour solutions appeared forming hysteresis loop and thixotropic behavior showed. The time dependent characteristics was appeared in sequence eating quality. Rice starch and deglutelin flour solutions appeared greatly time dependent characteristics, but defatted rice flour solutions appeared very little.

• Structural Engineering and Mechanics
• /
• 제73권4호
• /
• pp.381-395
• /
• 2020

Study on the inelastic response of bare and masonry infilled Reinforced Concrete (RC) frames repaired using Carbon Fibre Reinforced Polymers (CFRP) and Glass Fiber Reinforced Polymers (GFRP) subjected to quasi- static loading is presented in the work. The hysteresis behaviour, stiffness retention, energy dissipation and damage index are the parameters employed to analyze the efficacy of FRP strengthening of bare and brick in-filled RC frames. It is observed that there is a significant improvement in load carrying capacity of brick infilled frame over bare RC frame. Also FRP strengthened brick infilled frame performs much better than FRP repaired bare frame under quasi static loading. Repair and retrofitting of brick infilled RC frame shows an improved load carrying and damage tolerance capacity than control frame.

• Earthquakes and Structures
• /
• 제14권1호
• /
• pp.73-84
• /
• 2018

Low cyclic loading tests are conducted on the steel reinforced recycled concrete (SRRC) column-steel (S) beam composite frame joints. This research aims to evaluate the earthquake damage performance of composite frame joints by performing cyclic loading tests on eight specimens. The experimental failure process and failure modes, load-displacement hysteresis curves, characteristic loads and displacements, and ductility of the composite frame joints are presented and analyzed, which shows that the composite frame joints demonstrate good seismic performance. On the basis of this finding, seismic damage performance is examined by using the maximum displacement, energy absorbed in the hysteresis loops and Park-Ang model. However, the result of this analysis is inconsistent with the test failure process. Therefore, this paper proposes a modified Park-Ang seismic damage model that is based on maximum deformation and cumulative energy dissipation, and corrected by combination coefficient ${\alpha}$. Meanwhile, the effects of recycled coarse aggregate (RCA) replacement percentage and axial compression ratio on the seismic damage performance are analyzed comprehensively. Moreover, lateral displacement angle is used as the quantification index of the seismic performance level of joints. Considering the experimental study, the seismic performance level of composite frame joints is divided into five classes of normal use, temporary use, repair after use, life safety and collapse prevention. On this basis, the corresponding relationships among seismic damage degrees, seismic performance level and quantitative index are also established in this paper. The conclusions can provide a reference for the seismic performance design of composite frame joints.

• Geomechanics and Engineering
• /
• 제25권2호
• /
• pp.159-170
• /
• 2021

Particle size of tailings in different areas of dams varies due to sedimentation and separation. Saturated hydraulic conductivity of high-stacked talings materials are seriously affected by void ratio and particle breakage. Conjoined consolidation permeability tests were carried out using a self-developed high-stress permeability and consolidation apparatus. The hydraulic conductivity decreases nonlinearly with the increase of consolidation pressure. The seepage pattern of coarse-particle tailings is channel flow, and the seepage pattern of fine-particle tailings is scattered flow. The change rate of hydraulic conductivity of tailings with different particle sizes under high consolidation pressure tends to be identical. A hydraulic conductivity hysteresis is found in coarse-particle tailings. The hydraulic conductivity hysteresis is more obvious when the water head is lower. A new hydraulic conductivity-void ratio equation was derived by introducing the concept of effective void ratio and breakage index. The equation integrated the hydraulic conductivity equation with different particle sizes over a wide range of consolidation pressures.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.563-566
• /
• 2002

We investigated to decrease the leakage current of SiNx film by employing $N_2$ plasma treatment. The insulator layers were prepared by two step process; the $N_2$ plasma treatment and then PECVD SiNx deposition with $SiH_4$, $N_2$ gases. To prove the influence of the $N_2$ plasma treatment, the Si substrate was exposed to the plasma, which was generated in Ne gas ambient. Without plasma treatment SiNx film grow at the rate of 7. 03 nm/min, has a refractive index n = 1.77 and hydrogen content of $2.16{\times}10^{22}cm^{-3}$ for $N_2/SiH_4$ gas flow ratio of 20. The obtained films were analyzed in terms of deposition rates, refractive index, hydrogen concentration, and electrical properties. By employing $N_2$ plasma treatment, interface traps such as mobile charges and injected charges were removed, hysteresis of capacitance-voltage (C-V) disappeared. We observed plasma treated sample were decreased the leakage current density reduces by 2 orders with respect to the sample having no plasma treatment.