• 해양환경안전학회지
• /
• 제24권7호
• /
• pp.916-922
• /
• 2018

는 열교 환기를 세척할 때 최근 신재생에너지의무화제도(RPS: Renewable Portfolio Standard)대상 신재생에너지 항목에 발전소 온배수가 신재생에너지공급인증서(REC:Renewable Energy Certificate)의 수열에너지(가중치 1.5)로 추가되어 온배수 열원에 대한 가치가 높아졌다. 본 연구에서는 고탁도지역 온배수의 직접적인 활용을 위한 방안으로 히트펌프시스템 내 탁도저감장치를 도입하여 열교환기에 가해지는 오염물질의 저감 효과를 확인해보기 위해 한 달 동안 실증테스트를 실시하였다. 실험결과 탁도 저감효과가 80 % 이상으로 고탁도 지역의 온배수 활용을 위한 방안으로 탁도저감장치의 적용가능성을 확인 할 수 있었다. 또한 탁도저감시스템에 따른 열교환기의 오염도 저감 효과를 검증하기 위해 30일간 운전한 열교환기를 해체하여 분석해본 결과 탁도저감시스템을 거친 열교환기보다 그렇지 않은 열교환기의 오염정도가 높은 것을 확인하였다. 열교환기에 유입된 오염물질(스케일)을 분석해본 결과 주로 $SiO_2$, $Na(Si_3Al)O_8$, $CaCO_3$, NaCl 성분의 광물이 검출되었는데 이는 높은 탁도로 인해 해양퇴적토가 열교환기에 유입된 것으로 분석되었다. 그 외에도 소량이지만 $TiO_2$, MnO, $Cr_2O_3$가 검출되었다. 이는 열교환기를 세척할 때 열교환기 재료로부터 기인한 중금속이 소량 용출된 것으로 판단된다.

• 설비공학논문집
• /
• 제29권10호
• /
• pp.551-557
• /
• 2017

Most European economies, Japan, and many governments have made it a major policy to expand the green business by disseminating heat pump technology, which has a large $CO_2$ reduction effect. The heat pump of all heat sources has been recognized as renewable energy and the policy to encourage has been implemented. In the recently revised Renewable Energy Law, the hydrothermal source (surface sea water) heat pump was newly included in renewable energy. In addition, the scope of application of heat pumps has expanded in the mandatory installation of renewable energy for new buildings, remodeling buildings, and reconstructed buildings based on this law. However application to heat pumps using all natural energy as heat source has been put off. In this revision, the ratio of renewable energy to the total energy produced by the heat pump was fixed at 73%, which depends on coefficient of performance of heat pump. The ratio of renewable energy is $1-1.8/COP_H$, and should be calculated including the coefficient of performance of the heat pump. Using a high efficiency heat pump or a high-temperature heat source increases the coefficient of performance and also reduces $CO_2$ emissions. It is necessary to expand the application of heat pumps as renewable energy equipment and to improve the correct calculation of renewable energy production.

• 한국재료학회지
• /
• 제26권5호
• /
• pp.250-257
• /
• 2016

Octahedral $Co_3O_4$/carbon nanofiber (CNF) composites are fabricated using electrospinning and hydrothermal methods. Their morphological characteristics, chemical bonding states, and electrochemical properties are used to demonstrate the improved photovoltaic properties of the samples. Octahedral $Co_3O_4$ grown on CNFs is based on metallic Co nanoparticles acting as seeds in the CNFs, which seeds are directly related to the high performance of DSSCs. The octahedral $Co_3O_4$/CNFs composites exhibit high photocurrent density ($12.73mA/m^2$), superb fill factor (62.1 %), and excellent power conversion efficiency (5.61 %) compared to those characteristics of commercial $Co_3O_4$, conventional CNFs, and metallic Co-seed/CNFs. These results can be described as stemmnig from the synergistic effect of the porous and graphitized matrix formed by catalytic graphitization using the metal cobalt catalyst on CNFs, which leads to an increase in the catalytic activity for the reduction of triiodide ions. Therefore, octahedral $Co_3O_4$/CNFs composites can be used as a counter electrode for Pt-free dye-sensitized solar cells.

• 한국세라믹학회지
• /
• 제40권2호
• /
• pp.132-138
• /
• 2003

출발물질의 종류와 몰비 혼합 방법, 숙성, 결정화 온도와 결정화 시간 등 제올라이트 입자를 합성하는 조건이 FAU 형 제올라이트의 입자크기에 미치는 영향을 연구하였다. 동일한 출발물질이라도 혼합 경로에 따라 생성물의 결정상이 달랐다. 일반적으로 숙성과정을 거친 경우, 특히 숙성온도가 낮은 쪽이 입자 크기가 작았다. 2단계의 혼합겔 제조 방법을 거치는 경우 결정화 기간은 크게 단축되고 입자 크기도 작아졌으나. 1단계에서 제조된 2종의 혼합겔을 모두 숙성하지 않는 경우에는 결정화 시간은 단축되지만, 입자크기는 작아지지 않았다. 액상규산나트륨과 알루민산나트륨, 수산화나트륨을 출발물질로 하여. 저농도와 고농도의 혼합겔을 1차 제조하고, 이 혼합겔을 각각 숙성하고 다시 혼합하여 숙성하는 방법으로 결정화 시간을 단축하고 평균입경 0.4$\mu$m. 비표면적 838 $m^2$/g의 우수한 특성을 가지는 FAU혈 제올라이트를 합성하였다.

• Bulletin of the Korean Chemical Society
• /
• 제34권11호
• /
• pp.3387-3390
• /
• 2013

Catalytic gasification of mandarin waste residue was carried out using direct and indirect catalyst-contact methods for the first time. In the indirect method, non-catalytic reaction in a reactor was followed by catalytic upgrading of vapor product in another reactor. Two different catalysts, $Ni/{\gamma}-Al_2O_3$ and $Ni/CeO_2-ZrO_2$, were employed. $CeO_2-ZrO_2$ support was prepared using hydrothermal synthesis in supercritical water. The catalysts were characterized by $H_2$-temperature programmed reduction and Brunauer-Emmett-Teller analyses. Under the condition of equivalent ratio (ER) = 0, the indirect catalyst-contact method led to a higher gas yield than the direct method. Under ER = 0.2, the yield of biogas obtained over $Ni/CeO_2-ZrO_2$ was higher than that obtained over $Ni/{\gamma}-Al_2O_3$. Also, the coke formation of $Ni/CeO_2-ZrO_2$ was lower than that of $Ni/{\gamma}-Al_2O_3$. Such results were attributed to the higher reducibility and better lattice oxygen mobility of $Ni/CeO_2-ZrO_2$, which were advantageous for partial oxidation reaction.

• Horticulture, Environment, and Biotechnology : HEB
• /
• 제59권6호
• /
• pp.847-856
• /
• 2018

This research aimed to evaluate the effectiveness of hot water ($43-53^{\circ}C{\cdot}5min^{-1}$; $47^{\circ}C{\cdot}2-6min^{-1}$), 1-methylcyclopropene (1-MCP) at $50-300nL\;L^{-1}$ and a combination of hot water ($47/49^{\circ}C{\cdot}5min^{-1}$) and phosphite $40%\;P_2O_5+20%\;K_2O$;$40%\;P_2O_5+10%\;Zn$) in anthracnose control and the effect on fruit quality [fresh weight loss (FWL-%); pH, total soluble solids ($TSS-^{\circ}Brix$), and titratable acidity (TA = % citric acid (CA)] of passion fruit ( Passiflora edulis f. flavicarpa ) at the postharvest stage. When the fruits were in the stage of 0% dehydration and fully yellow peels, they were disinfested and inoculated with Colletotrichum gloeosporioides. They were then subjected to the above mentioned treatments; this was followed by incubation for 120 h. The diameter of the disease lesions was monitored daily. After the incubation, a physico-chemical analysis was performed. Hot-water treatment resulted in disease reduction at 47 and $49^{\circ}C$ for 4 and 5 min. The combination of hot-water treatment at $47^{\circ}C$ (4 or 5 min) and application of the phosphite of K or Zn significantly reduced disease severity in fruits. The 1-MCP treatment reduced anthracnose severity in passion fruit mainly at $200nL\;L^{-1}{\cdot} 24h^{-1} $. None of the treatments significantly changed the physico-chemical characteristics of the fruit [FWL (2.6-4.1%); pH (3.2-3.5), TSS ($8.9-10.9^{\circ}Brix$), and TA (1.8-2.5% CA)].

• 한국포장학회지
• /
• 제27권2호
• /
• pp.55-62
• /
• 2021

This study aims to reduce the rancid odor generated during the fermentation process of kimchi by inserting zinc oxide (ZnO) into an inorganic porous material with a high surface area to decompose or adsorb the fermentation odor. ZnO activated by the presence of moisture exhibits decomposition of rancid odors. Mixed with Titanium dioxide (TiO₂), a photocatalyst. To manufacture the packaging liner used in this study, NaOH, ZnCl₂, and TiO₂ powder were placed in a tank with diatomite and water. The sludge obtained via a hydrothermal ultrasonication synthesis was sintered in an oven. After being pin-milled and melt-blended, the powders were mixed with linear low-density polyethylene (L-LDPE) to make a masterbatch (M/B), which was further used to manufacture liners. A gas detector (GasTiger 2000) was used to investigate the total amount of sulfur compounds during fermentation and determine the reduction rate of the odor-causing compounds. The packaging liner cross-section and surface were investigated using a scanning electron microscope-energy dispersive X-ray spectrometer (SEM-EDS) to observe the adsorption of sulfur compounds. A variety of sulfur compounds associated with the perceived unpleasant odor of kimchi were analyzed using gas chromatography-mass spectrometry (GC-MS). For the analyses, kimchi was homogenized at room temperature and divided into several sample dishes. The performance of the liner was evaluated by comparing the total area of the GC-MS signals of major off-flavor sulfur compounds during the five days of fermentation at 20℃. As a result, Nano-grade inorganic compound liners reduced the sulfur content by 67 % on average, compared to ordinary polyethylene (PE) foam liners. Afterwards SEM-EDS was used to analyze the sulfur content adsorbed by the liners. The findings of this study strongly suggest that decomposition and adsorption of the odor-generating compounds occur more effectively in the newly-developed inorganic nanocomposite liners.

• Korean Journal of Chemical Engineering
• /
• 제35권11호
• /
• pp.2283-2289
• /
• 2018

$TiO_2$ microspheres were successfully synthesised by simple solution phase method by using various amount of titanium butoxide as precursor. The prepared $TiO_2$ were characterized by X-ray diffraction (XRD), UV-vis diffuse reflectance absorption spectra (UV-DRS), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). XRD analysis revealed that the as-synthesized $TiO_2$ microsphere poses an anatase phase. The photocatalytic degradation experiments were carried out with three different dyes, such as methylene blue, brilliant black, reactive red-120 for four hours under UV light irradiation. The results show that $TiO_2$ morphology had great influence on photocatalytic degradation of organic dyes. The experimental results of dye mineralization indicated the concentration was reduced by a high portion of up to 99% within 4 hours. On the basis of various characterization of the photocatalysts, the reactions involved to explain the photocatalytic activity enhancement due to the concentration of titanium butoxide and morphology include a better separation of photogenerated charge carriers and improved oxygen reduction inducing a higher extent of degradation of aromatics.

• 공업화학
• /
• 제32권3호
• /
• pp.229-236
• /
• 2021

금속 유기 골격체는 최근 20년간 센서, 촉매, 에너지 저장과 같은 많은 응용분야에서 관심을 받아온 물질이다. 이 물질을 합성하기 위해 수열 합성, 유기용매열과 같은 합성법이 제시되어 왔으나, 그 공정이 복잡하면서 고비용·장시간이 소요된다는 문제점이 제기되어 왔다. 이를 해결하기 위한 전기화학적 합성법이 새롭게 제시되었는데, 간단한 준비절차와 특정한 온도·압력 조건 없이 합성할 수 있어 기존 합성법의 단점을 보완한다는 특징이 있다. 이에 본 총설논문에서는 전기화학적으로 합성 가능한 금속 유기 골격체의 종류와 전기화학적 합성 메커니즘을 다루고 있다. 전기화학적 합성법을 통해 형성된 금속 유기 골격체를 적용한 응용분야 연구동향을 정리하였다.

• 대한화장품학회지
• /
• 제49권1호
• /
• pp.9-16
• /
• 2023

본 연구에서는 벨벳콩(Mucuna pruriens, M. pruriens) 추출물을 활용하여 천연소재 기반 항산화 기능성 화장품 소재로서의 활용가치를 검증하고자 하였다. 벨벳콩을 물과 70% 에탄올, 70% 아세톤을 용매로 하여 추출, 농축, 동결건조한 다음 각각의 분말화된 벨벳콩 열수 추출물(MW), 벨벳콩 70% ethanol 추출물(ME), 벨벳콩 70% acetone 추출물(MA) 시료를 확보하였다. MW, ME, MA를 활용하여 DPPH 라디칼 소거 활성, ABTS⁺ 라디칼소거 활성, SOD 유사 활성, 환원력, 총 페놀 및 플라보노이드 함량 분석을 통해 항산화 활성을 분석한 결과, 모두 우수한 항산화 효능을 나타내었다. 따라서 벨벳콩 추출물은 항산화 관련 기능성 화장품 천연소재로서의 활용 가능성이 높을 것으로 사료된다.