• Corrosion Science and Technology
• /
• 제8권3호
• /
• pp.103-109
• /
• 2009

An epoxy coating was designed to give a hydrophobic property on its surface by modifying it with three types of Amino Terminated Polydimethylsiloxane (ATP), and then effects of the modification on the structure, surface hydrophobic tendency, water transport behavior and hence corrosion protectiveness of the modified epoxy coating were examined using FT-IR spectroscopy, hydrothermal cyclic test, and impedance test. The surface of epoxy coating was changed from hydrophilic to hydrophobic property due primarily to a phase separation tendency between epoxy and modifier by the modification. The phase separation tendency is more appreciable when modified by ATP with higher molecular weight ATP at higher content. Water transport behavior of the modified epoxy coating decreased more in that with higher hydrophobic surface property. The resistance to localized corrosion of the modified epoxy coated carbon steel was well agreed with its water transport behavior and hydrophobic tendency.

• Corrosion Science and Technology
• /
• 제13권5호
• /
• pp.170-177
• /
• 2014

Polyurethane coating was designed to give a hydrophobic property on its surface by modifying it with hydroxyl terminated polydimethylsiloxane and then effects of surface hydrophobic tendency, water transport behavior and hence corrosion protectiveness of the modified polyurethane coating were examined using FT-IR/ATR spectroscopy, contact angle measurement and electrochemical impedance test. As results, the surface of polyurethane coating was changed from hydrophilic to hydrophobic property due primarily to a phase separation tendency between polyurethane and modifier by the modification. The phase separation tendency is more appreciable when modified by polydimethylsiloxane with higher content. Water transport behavior of the modified polyurethane coating decreased more in that with higher hydrophobic surface property. The decrease in the impedance modulus ${\mid}Z{\mid}$ at low frequency region in immersion test for polyurethane coatings was associated with the water transport behavior and surface hydrophobic properties of modified polyurethane coatings. The corrosion protectiveness of the modified polyurethane coated carbon steel generally increased with an increase in the modifier content, confirming that corrosion protectiveness of the modified polyurethane coating is well agreed with its water transport behavior.

• 한국표면공학회지
• /
• 제45권4호
• /
• pp.151-154
• /
• 2012

A hydrophobic surface has been fabricated on aluminum by two-step surface treatment processes consisting of structure modification and surface coating. Nature inspired micro nano scale structures were artificially created on the aluminum surface by a blasting and Ar ion beam etching. And a hydrophobic thin film was coated by a trimethylsilane ($(CH_3)_3SiH$) plasma deposition to minimize the surface energy of the micro nano structure surface. The contact angle of micro nano structured aluminum surface with the trimethylsilane coating was $123^{\circ}$ (surface energy: 9.05 $mJ/m^2$), but the contact angle of only trimethylsilane coated sample without the micro nano surface structure was $92^{\circ}$ (surface energy: 99.15 $mJ/m^2$). In the hydrophobic treatment of aluminum surface, a trimethylsilane coated sample having the micro nano structure was more effective than only trimethylsilane coated sample without the micro nano structure.

• 한국가시화정보학회지
• /
• 제21권3호
• /
• pp.15-22
• /
• 2023

This research introduces an innovative approach for fabricating microstructure surfaces using spray-coating deposition. The resulting surface, referred to as Magnetically Responsive Microstructures (MRM), exhibits hierarchically structured micro-pillar arrays with remarkably high aspect ratios. The fabrication process involves precisely mixing PDMS and hexane with Carbonyl iron powders, followed by ultrasonication and spray-coating on the top of a PDMS substrate placed on the neodymium magnet. The MRM surface shows hydrophobic properties, characterized by a contact angle surpassing 150° and an aspect ratio exceeding 10. Through a comprehensive exploration of critical parameters, including spray amount, magnet-substrate distance, and solution ratio enhanced dynamic tunability and exceptional hydrophobic characteristics are attained. This novel approach holds significant potential for diverse applications in the realm of dynamically tunable microstructures and magnetically responsive surfaces.

• 공업화학
• /
• 제25권2호
• /
• pp.174-180
• /
• 2014

양어 사료의 부상시간을 연장시켜, 사료 소비율을 높이고 양식장 수질오염을 저하시키기 위해 사료에 소수성 코팅을 하였다. 상압 유전체장벽방전 플라즈마 반응기 시스템에서 헥사메틸다이실록세인(HMDSO), 톨루엔 및 n-헥세인을 전구물질로 사용하여 사료 입자의 표면에 코팅 층을 형성시켰다. 공정 변수인 플라즈마 구동을 위한 입력 전력, 전구물질 종류, 코팅시간을 변화시키며 코팅 성능을 비교하였다. 코팅된 사료 표면의 물리, 화학적 성질은 접촉각 측정기와 퓨리에 변환 적외선 분광광도계를 이용하여 조사하였다. 소수성 플라즈마 코팅 후 물의 접촉각 증가는 표면이 소수성으로 변화하였음을 나타냈으며, 코팅된 시료의 적외선 분광 스펙트럼을 통해 소수성 피막이 $CH_3$, Si-O-Si, Si-C로 구성되어 있음을 알 수 있었다. 코팅된 사료의 부상시간이 미코팅 사료에 비해 수초에서 3 min까지 증가하였으며, 플라즈마 코팅방법이 사료의 부상성능을 향상시키는 방법으로 사용될 수 있음을 보여 주었다. 코팅 직후 시료에 비해 6일 경과 후 시료의 물 접촉각이 크게 증가하였는데, 이를 통해 에이징 효과를 확인할 수 있었다.

• Corrosion Science and Technology
• /
• 제7권6호
• /
• pp.344-349
• /
• 2008

Epoxy coatings were prepared to give a different corrosion protection by reacting it with two different kinds of curing agent, and then effects of the curing agents on the structure, surface hydrophobic tendency, water transport behavior and hence corrosion protection of epoxy coatings were examined using hygrothermal cyclic test, and impedance analysis. In the results of EIS, the corrosion protection of epoxy coating cured by polyamide shows better than epoxy coating cured by polyamide epoxy adduct. It was well agreed with its water transport behavior and hydrophobic tendency.

• Corrosion Science and Technology
• /
• 제18권6호
• /
• pp.232-242
• /
• 2019

In this study, hydrophobically modified fumed silica was added to the PVDF coating to improve corrosion protection performance. Two types of silane modifiers, trimethylchlorosilane (TMCS) and hexamethyldisilazane (HMDZ), were used for hydrophobic modification of the fumed silica. The composition of modified fumed silica was analyzed by Fourier transform infrared, X-ray photoelectron spectroscopy, and elemental analysis. The dispersion of modified fumed silica in the PVDF coating was observed by the transmission electron microscopy, and the hydrophobicity of PVDF coating was analyzed by the water contact angle. Surface properties were examined by the field emission scanning electron microscopy and scanning probe microscopy. Potentiodynamic polarization was conducted to confirm corrosion protection performance of PVDF coating in terms of hydrophobically-modified fumed silica contents. As a result, the average surface roughness and the water contact angle of the PVDF coating increased with modifier contents. The results of the potentiodynamic polarization test showed an increase of the E_corr values with increase of the hydrophobicity of PVDF coating. Thus, it clearly indicates that the corrosion protection performance of PVDF coating improved with the addition of the hydrophobic-modified fumed silica that prevents the penetration of moisture into the PVDF coating.

• 한국응용과학기술학회지
• /
• 제36권2호
• /
• pp.531-540
• /
• 2019

친수성 및 소수성 나노실리카를 tetraethyl orthosilicate(TEOS)를 커플링제로 사용하여 유리 표면에 거친 스파이크 구조 형성과 반응성 hydroxyl기를 동시에 도입한 후 불소를 함유한 실란으로 2차 코팅처리하여 궁극적으로 발수성 유리 표면 형성의 최적 조건을 확립하는 연구를 수행하였다. 소수성 나노실리카인 실리카 에어로졸을 이용한 초소수 도막의 형성은 나노실리카 표면에 반응성인 -OH기가 존재하지 않아 내구성이 있는 소수성 도막을 형성할 수 없었다. 이에 반하여 친수성기를 가진 나노실리카와 가수분해된 TEOS를 포함하는 코팅액 이용하여 유리 표면을 1차 코팅한 후 2차로 trichloro-(1H,1H,2H,2H)perfluorooctylsilane(TPFOS) 용액으로 코팅하여 $150^{\circ}$ 이상의 수접촉각을 가지는 초소수 표면을 제조하였으며, $1^{\circ}$ 이하의 물 슬라이딩각을 보여 초발수성도 동시에 가지고 있었다. 이에 덧붙여 친수성 나노실리카의 함량이 증가할수록 광투과도가 감소하였으며, TPFOS 용액에 의해서도 광투과도가 감소하였다. 코팅된 유리시편의 내구성 50회 문지름까지는 초소수성을 유지하였으나, 200회 문지름에서는 단지 소수성만을 유지하였다. 결론적으로 최적의 코팅액의 조건은 친수성 나노실리카의 함량이 0.3 g인 HP3 코팅액을 2회 코팅한 후 2차로 TPFOS 용액으로 코팅하는 것이었다. 이렇게 제조된 코팅액은 광투과도가 중요한 솔라셀의 표면 처리제로 사용이 가능할 것으로 판단된다.

• Korean Chemical Engineering Research
• /
• 제62권1호
• /
• pp.105-111
• /
• 2024

SLA (Stereo Lithography Apparatus) 방식은 액체 상태의 광경화성 레진(Resin)이 자외선 레이저에 닿으면 고체가 되는 원리를 활용한 3D 프린팅 방식으로 다양한 분야에서의 활용도가 증가하고 있다. 본 연구에서는 이 SLA 3D 프린팅 출력물의 표면 특성 중 소수성과 투명도를 개선하여 미세 유체 시스템의 제작에 활용하기 위한 기초 연구를 수행하였다. SLA 출력물은 소수성 코팅 방법을 이용해 표면 소수성의 특성을 개선할 수 있었으나, 소수성 코팅 방법의 종류에 따라 다양한 환경에서의 코팅 유지력은 차이를 보였다. 또한, 미세 유체 시스템의 제작에 요구되는 충분한 투명도와 소수성의 특성을 함께 확보하기 위해 선행된 연구에서 제안한 투명도 확보 방법에 소수성 코팅을 적용하여 접촉각의 변화를 비교하였다. Teflon 코팅법이 이산화 티타늄 코팅법과 비교하여 우수한 투명도의 확보가 가능하며, 다양한 환경에 노출되었을 때 높은 코팅의 유지력을 가져 미세 유체 시스템의 제작에 활용되기에 적합한 소수성 코팅법으로 제안되었다. 마지막으로 본 연구를 통해 제안된 미세 유체 시스템의 제작에 적합한 소수성 코팅 방법인 Teflon 코팅법 중 Fluoropel 800을 이용하여 디지털 미세 유체 시스템 중 하나인 액적 접촉 충전 현상(Electrophoresis of Charged Droplet, ECD) 칩을 SLA 3D 프린팅으로 제작, 액적의 조작을 성공적으로 시연함으로써 SLA 3D 프린팅 기술의 미세 유체 시스템의 제작에 활용 가능성을 확인하였다.

• 한국재료학회지
• /
• 제29권7호
• /
• pp.425-431
• /
• 2019

Generally, ceramic tiles for building construction are manufactured by dry forming process using granular powders prepared by spray drying process after mixing and grinding of mineral raw materials. In recent years, as the demand for large ceramic tiles with natural texture has increased, the development of granule powders with high packing ratio and excellent flowability has become more important. In this study, ceramic tile granule powders are coated with hydrophobically treated silica nanoparticles. The effects of hydrophobic silica coating on the flowability of granule powders and the strength of the green body are investigated in detail. Silica nanoparticles are hydrophobically treated with GPTMS(3-glycidoxypropyl trimethoxy silane), which is an epoxy-based silane coupling agent. As the coating concentration increases, the angle of repose and the compressibility decrease. The tap density and flowability index increase after silica coating treatment. These results indicate that hydrophobic treatment can improve the flowability of the granular powder, and prevent cracking of green body at high pressure molding.