• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문 발표회
• /
• pp.59-62
• /
• 2003

Kinds, shapes and fraction ratios of fibers have influence on properties of HPFRCC(High-Performance Fiver Reinforced Cementitious Concrete) like bending strength, strain capacity and fracture toughness. For example, hydrophilic fibers have different chemical bond strength from hydrophobic fibers, fiber shapes influence on fiber pull-out and rupture, and fiber volume fraction influence on bending strength. In this study, to estimate influences of kinds, shapes and fraction ratios of fibers, we make HFRCC with 3 kind of fiber in various volume fraction of fiber and compare cracking, bending strength and fracture toughness. As the results, bending strength of HPFRCC was increased as fiber volume fraction was increase and fiber tensile strength was increase, and strain capacity and fracture toughness of HFRCC was higher in fiber pull-out fracture than in fiber rupture fracture. And HFRCC showing pseudo strain hardening has higher fiber reinforce efficiency than others.

• Environmental Analysis Health and Toxicology
• /
• 제21권3호
• /
• pp.255-266
• /
• 2006

Soil organic matter (OM) is well documented for its capacity to retain persistent organic pollutants (POPs) and thus is important in dictating the environmental partitioning of POPs between media such as air, water, and soil. Black carbon (BC) is a small component of OM and exhibitt a 10$\sim$100 times greater sorption capacity of POPs than humified OM. Furthermore, due to the inherent long environmental life time of BC, a result of its resistance to physical and biological degradation, POPs can continue to accumulate in BC over a long period of time. The unique properties of BC have been of particular interest over the last 30 years and have resulted in broad research being conducted into its effects of POP cycling in atmospheric, oceanographic and soil matrices. The results of such studies have proved valuable In providing new research initiatives into the role of BC in the cycling of hydrophobic organic compounds (HOCs) as well as giving further insight into the long range atmospheric transport (LRAT) potential and subsequent risk assessment criteria for persistent organic pollutants (POPs). In this report, we introduce a novel study examining the relationships between BC and OM with respect to their POP sorption capacity and discuss the role of BC in influencing the environmental regulation of organic pollutants.

• 대한환경공학회지
• /
• 제27권12호
• /
• pp.1321-1326
• /
• 2005

낙동강 원수의 경우 소수성 물질이 43%, 친수성 물질이 39%, 반친수성 물질이 18%를 차지하고 있는 것으로 나타났으며, 소수성 물질을 세분화하여 조사한 결과 fulvic acid는 62%, humic acid는 38%로 나타났으며, 또한, 카르복실기는 64%, 페놀기는 36%를 차지하고 있는 것으로 나타났다. 친수성 물질을 세분화하여 조사한 결과 HPI-N이 44%, HPI-C가 56%를 차지하고 있었다. 친수성 유기물질 중 HPI-C에 비하여 HPI-N이 막 오염을 더욱 많이 유발하였으며, 소수성 유기물질에서는 HA가 FA에 비하여 막 오염을 더 많이 유발하였으며, 작용기에 따른 막 오염 현상을 살펴보면 카르복실기의 경우 페놀기에 비하여 투과 flux 감소가 크게 나타나고 있다. 공극의 크기가 커질수록 공극 속으로 전달되는 고분자 유기물이 많이 발생하며 이러한 고분자 유기물이 공극을 막아버리는 현상에 의하여 투과 flux 감소가 발생하는 것으로 나타났다. 또한 공극의 크기가 상대적으로 큰 막의 경우 투과되는 양이 공극이 작은 막 보다 상대적으로 많기 때문에 운전초기에 많은 양의 유기물이 막으로 전달되어 막의 표면과 공극에 흡착되어 막의 공극의 크기가 커짐에 따라 투과 flux 감소가 크게 나타났다.

• Journal of Microbiology and Biotechnology
• /
• 제17권12호
• /
• pp.1976-1982
• /
• 2007

In the current studies, we characterized the degradation of a hot mixture of benzene and toluene (BT) gases by a thermophilic biofilter using polyurethane as a packing material and high-temperature compost as a microbial source. We also examined the effect of supplementing the biofilter with yeast extract (YE). We found that YE substantially enhanced microbial activity in the thermophilic biofilter. The degrading activity of the biofilter supplied with YE was stable during long-term operation (approximately 100 d) without accumulating excess biomass. The maximum elimination capacity ($1,650\;g{\cdot} m^{-3}{\cdot} h^{-1}$) in the biofilter supplemented with YE was 3.5 times higher than that in the biofilter without YE ($470\;g{\cdot} m^{-3}{\cdot} h^{-1}$). At similar retention times, the capacity to eliminate BT for the YE-supplemented biofilter was higher than for previously reported mesophilic biofilters. Thus, thermophilic biofiltration can be used to degrade hydrophobic compounds such as a BT mixture. Finally, 168 rDNA polymerase chain reaction-DGGE (PCR-DGGE) fingerprinting revealed that the thermophilic bacteria in the biofilter included Rubrobacter sp. and Mycobacterium sp.

• Carbon letters
• /
• 제18권
• /
• pp.24-29
• /
• 2016

High pollutant-loading capacities (up to 319 times its own weight) are achieved by three-dimensional (3D) macroporous, slightly reduced graphene oxide (srGO) sorbents, which are prepared through ice-templating and consecutive thermal reduction. The reduction of the srGO is readily controlled by heating time under a mild condition (at 1 10⁻² Torr and 200℃). The saturated sorption capacity of the hydrophilic srGO sorbent (thermally reduced for 1 h) could not be improved further even though the samples were reduced for 10 h to achieve the hydrophobic surface. The large meso- and macroporosity of the srGO sorbent, which is achieved by removing the residual water and the hydroxyl groups, is crucial for achieving the enhanced capacity. In particular, a systematic study on absorption parameters indicates that the open porosity of the 3D srGO sorbents significantly contributes to the physical loading of oils and organic solvents on the hydrophilic surface. Therefore, this study provides insight into the absorption behavior of highly macroporous graphene-based macrostructures and hence paves the way to development of promising next-generation sorbents for removal of oils and organic solvent pollutants.

• 한국수소및신에너지학회논문집
• /
• 제28권3호
• /
• pp.246-251
• /
• 2017

To fabricate a hydrocarbon polymer electrolyte composite membrane incorporated with Pt nanoparticle, the polymer electrolyte membrane made of a sulfonated-fluorinated hydrophilic-hydrophobic block copolymer (SFBC) and sulfonated poly (ether ether ketone) (SPEEK) blend in the wight ratio of 1 : 1 was synthesized, and a simple drying process was used in order to incorporate Pt nanoparticle into the SFBC/SPEEK film by reducing platinum (II) bis (acetylacetonate), Pt $(acac)_2$. The distribution of the Pt nanoparticles was observed by transmission electron microscopy (TEM), and mechanical and thermal properties were tested by universal testing machine (UTM) and thermogravimetry analyzer (TGA). Cation conductivity, ion exchange capacity (IEC) and I-V characteristics were estimated.

• International Journal of Automotive Technology
• /
• 제5권1호
• /
• pp.1-7
• /
• 2004

In line with the Super Ultra Low Emission Vehicle (SULEV) regulation, the main idea in this study has been focused on the utilization of hydrocarbon adsorber (HCA) to adsorb the excess hydrocarbons emitted during a period of engine cold-start, As main recipes of HCA materials, many types of zeolite as well as the combination of alumina and precious metals were used, Representative physico-chemical factors of zeolite such as acidic and hydrophobic properties were characterized. The optimum recipe of HCA materials was also determined. Among the acid properties of zeolites, the Si/Al ratio was found to be the most important factor to get higher hydrocarbon adsorption capacity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.592-595
• /
• 2002

New polymeric hydrogels based on vinyl ethers have been synthesized by the ${\gamma}$-initiated polymerization method. Their physical chemistry and physical mechanical properities have been studied. It has been shown that structure and swelling behavior of the hydrogels can be regulated by the changing of synthesis conditions nature of monomers. Novel stimuli-sensitive polymers have been synthesized by the varying of macrochains hydrophilic-hydrophobic balance. The some biomedical aspects of application of hydrogels in capacity of drain aging polymeric materials in ophthalmology surgery, implants in plastic surgery as well as drug delivery systems have been investigated.

• Bulletin of the Korean Chemical Society
• /
• 제23권8호
• /
• pp.1073-1077
• /
• 2002

Binding of dodecyl trimethylammonium bromide (DTAB) to human and bovine hemoglobin and globin samples has been investigated in 50 mM glycine buffer pH = 10, I = 0.0318 and 300 K by equilibrium dialysis and temperature scanning spectrophotometry techniques and method for calculation of average hydrophobicity. The binding data has been analyzed, in terms of binding capacity concept $({\theta})$, Hill coefficient (nH) and intrinsic Gibbs free energy of binding $({\Delta}Gbv).$ The results of binding data, melting point (Tm) and average hydrophobicity show that human hemoglobin has more structural stability than bovine hemoglobin sample. Moreover the results of binding data analysis represent the systems with two and one sets of binding sites for hemoglobin and globin, respectively. It seems that the destabilization of hemoglobin structure due to removal of heme group, is responsible of such behavior. The results indicating the removal of heme group from hemoglobin caused the depletion of first binding set as an electrostatic site upon interaction with DTAB and exposing the hydrophobic patches for protein.

• 동아시아식생활학회지
• /
• 제17권3호
• /
• pp.379-383
• /
• 2007

The effects of phenolic acids on the physical properties of wheat flour extrudate were investigated. Ferulic acid, fumaric acid, and p-coumaric acid were mixed with hard wheat flour, respectively, and extruded under a twin screw extruder. We found that by adding the phenolic acids, longitudinal expansion at the die increased, textural hardness decreased, and the water absorption capacity of the extrudate decreased. The results showed that the addition of phenolic acids produced a softer textured, more longitudinally puffed and hydrophobic extrudate compared to the control extrudate. Moreover, the addition of phenolic acids did not significantly affect the color of the extrudate: oxidative browning of the phenolic acids was not observed, due to inactivation of the browning enzymes under the hot temperature and reduced oxygen conditions of the extrusion process.