• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.352-359
• /
• 2020

The effects of hydrogen precipitation on the mechanical properties of Zircaloy-4 and Zirlo alloys were examined with uniaxial tensile tests at room temperature and at 400 ℃ and accompanying microstructural changes in the Zircaloy-4 and Zirlo alloy specimens were discussed. The elastic moduli of Zircaloy-4 and Zirlo alloys decreased with increasing hydrogen concentrations. Yield strengths of both materials tended to decrease gradually. The reductions of yield stress seems to be caused by the dissipation of yield point phenomena shown in stress-strain curves. Ultimate tensile strengths (UTS) of Zircaloy-4 and Zirlo slightly increased at low hydrogen contents, and then decreased when the concentrations exceeded 500 and 700 wppm, respectively. Uniform elongations were stable until 600 wppm and drops to 0% around 1400 wppm at room temperature.

• 에너지공학
• /
• 제19권4호
• /
• pp.221-227
• /
• 2010

본 연구에서는 바이오매스 및 플라스틱에 가스화 효율을 높이기 위한 탄산염 촉매 또는 Ni based 촉매를 혼합한 시료에 대하여, 고정층 반응기를 이용하여 급속 등온 열분해 실험을 수행하여, 생성된 가스의 온도, 시료 및 촉매의 영향에 관한 분석을 통하여, 최적의 수소 생성 수율을 얻고자 한다. 고위발열량 측정 결과, 바이오매스보다 플라스틱 폐기물의 발열량이 높아짐을 알 수 있었다. 원소분석 결과로부터 수소 함량은 플라스틱 시료가 더 높았다. 계산된 활성화 에너지는 촉매 적용에 의해 감소하였고, 5 wt% 이상의 경우에는 큰 변화를 보이지 않았다. 수소수율은 플라스틱 폐기물이 포함된 시료, 온도에 대해서는 대부분 높은 온도 범위에서 최대값이 얻어졌다. 또한 대부분의 시료에서 높은 혼합비를 갖는 조건의 수소수율이 가장 높은 결과를 보였으나, 5 wt% 이상의 조건에서는 촉매 혼합비 증가의 영향은 미비하여, 활성화 에너지의 결과와 잘 일치함을 확인하였다. 전체적으로 촉매 반응이 무촉매 반응에 비하여 높은 수소수율이 얻어졌다. 촉매 종류에 대하여, 탄산염 촉매인 $Na_2CO_3$ 및 $K_2CO_3$보다 Ni-$ZrO_2$ 촉매가 수소 생산을 위한 목적에 더 적합한 촉매임을 확인하였고, 본 연구로부터의 최대 수소수율을 위한 조건은 $900^{\circ}C$, 20 wt%의 Ni-$ZrO_2$(1:9) 촉매가 혼합된 Pitch Pine, Polyethylene 시료에 대하여 65.9 vol%의 높은 수소수율의 결과를 얻었다.

• 신재생에너지
• /
• 제2권4호
• /
• pp.70-77
• /
• 2006

The butane decomposition over the catalyst is an attractive method for the hydrogen production. The objective of the work was investigated the catalysis of carbon black in butane decomposition reaction. The Butane decomposition was performed over carbon black catalyst in a range of $500-1100^{\circ}C$. The butane conversion of thermal decomposition and catalytic decomposition were increased with increasing the reaction temperature The butane conversion of the thermal decomposition was higher than the butane conversion of the catalytic decomposition. Hydrogen and methane were mostly observed in the butane decomposition over $1000^{\circ}C$. Especially, the hydrogen yield was steadily increased with raising the reaction temperature, It could be known that the hydrogen yield of the catalytic decomposition was higher than one of the thermal cracking because the hydrogen productivity was improved by the catalyst. The deactivation of the catalyst was not observed in the reactivity test. The surface and crystalline of the fresh and used catalysts were characterized by TEM, BET surface area and XRD analysis, respectively. The fresh carbon black particles had mostly smoothly round-shaped surfaces. In the surface of the carbon black after the reaction, the deposited carbon was formed as the protrusion-shaped carbon and the cone-shaped. The proper peaks of carbon black appeared in XRD analysis.

• 대한환경공학회지
• /
• 제35권1호
• /
• pp.1-9
• /
• 2013

혐기성 연속 회분식 반응조(Anaerobic sequencing batch reactor; ASBR)를 이용하여 혼합배양을 통한 장기간의 수소생산특성을 조사하였다. 실험에 사용된 기질은 글루코오스(8,250 mg/L)였고, pH 5.5, 온도 $37^{\circ}C$, 교반속도 150 rpm으로 설정하여 160일 동안 반응조를 운전하였다. 운전초기에 F/M비 2로 유지되어 수소생산 수율은 0.8 mol $H_2/mol$ glucose의 수소가 생산되었고, 운전 80일째 수소생산수율은 2.68 mol $H_2/mol$ glucose까지 증가하였다. 그러나 그 이후로 수소 생산량이 지속적으로 감소하여 운전 130일경 이후 수소의 생산은 없는 것으로 나타났다. PCR-DGGE분석을 통해 반응조내 미생물은 일반적인 수소생성 균으로 알려지고 있는 Clostridium sp.가 검출되었으나 반응조 운전 조건의 변화가 수소생산 저감의 주된 원인으로 밝혀졌다. 즉 반응조의 MLSS 농도가 증가함에 따라 F/M비가 감소하고 생산된 수소는 propionic acid의 생성으로 소모되는 것으로 추정할 수 있고 이는 반응조의 F/M비 0.5와 propionic acid 농도는 2,130 mg/L로 높게 유지된 것으로 확인하였다.

• 한국분말재료학회지
• /
• 제28권3호
• /
• pp.201-207
• /
• 2021

Ni-Cr-Al metal-foam-supported catalysts for steam methane reforming (SMR) are manufactured by applying a catalytic Ni/Al₂O₃ sol-gel coating to powder alloyed metallic foam. The structure, microstructure, mechanical stability, and hydrogen yield efficiency of the obtained catalysts are evaluated. The structural and microstructural characteristics show that the catalyst is well coated on the open-pore Ni-Cr-Al foam without cracks or spallation. The measured compressive yield strengths are 2-3 MPa at room temperature and 1.5-2.2 MPa at 750℃ regardless of sample size. The specimens exhibit a weight loss of up to 9-10% at elevated temperature owing to the spallation of the Ni/Al₂O₃ catalyst. However, the metal-foam-supported catalyst appears to have higher mechanical stability than ceramic pellet catalysts. In SMR simulations tests, a methane conversion ratio of up to 96% is obtained with a high hydrogen yield efficiency of 82%.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.560-564
• /
• 1996

In recently, annealing process of cold rolled sheet tend to change to continuous annealing process for improving qualify, saving yield. In the meantime as demand for various kind and small lot of products has been increasing, batch annealing has been appreciated for its small restriction for the operation. So, we tested on the effect for a hydrogen contents of atmospheric gas at annealing furnace. As a result of several investigation. We confirmed for the following characteristics ; improved productivity, uniform heating, improved surface quality, saving energy. Therefore, the use of hydrogen instead of nitrogen as the protective gas, combined with high convection in batch annealing furnaces, has shown that considerable increases in furnace output and material quality are attainable. Owing to the low density, high diffusion and reducing character of hydrogen, a better transfer resulting in uniform material temperatures and improved coil surfaces can be achieved.

• Bulletin of the Korean Chemical Society
• /
• 제30권8호
• /
• pp.1832-1834
• /
• 2009

A simple and safe method has been presented for conversion of olefins into bromohydrins using hydrogen bromide and hydrogen peroxide as bromide source by visible light induced within a very short time to get high yield bromohydrins along with a little mount dibromo-product. In this paper, cyclohexene is firstly carried out as the model substrate and investigated the bromination under HBr/$H_2O_2$ system using 150 W incandescent light irradiated in C$Cl_4$ within short time to get good yield of 2-bromocyclohexanol along with a little mount of 1,2-dibromocyclohexane; then, a series of alkenes are brominated to corresponding bromohydrins using the same protocol.

• Corrosion Science and Technology
• /
• 제2권6호
• /
• pp.266-271
• /
• 2003

Safety diagnosis of various structural components and facilities is indispensable for preventing catastrophic failure of material by time-dependent and environment accelerating degradation. Also, this diagnosis of operating components should be done periodically for safe maintenance and economical repair. However, conventional standard methods for mechanical properties have the problems of bulky specimen, destructive procedure and complex procedure of specimen sampling. So, a non-destructive and simple mechanical testing method using small specimen is needed. Therefore, an advanced indentation technique was developed as a potential method for non-destructive testing of in-field structures. This technique measures indentation load-depth curve during indentation and analyzes the mechanical properties related to deformation such as yield strength, tensile strength and work-hardening index. In this paper, we characterized the tensile properties including yield and tensile strengths of the V-modified Cr-Mo steels in petro-chemical and thermo-electrical plants. And also, the effects of hydrogen-assisted degradation of the V-modified Cr-Mo steels were analyzed in terms of work-hardening index and yield ratio.

• Korean Chemical Engineering Research
• /
• 제53권1호
• /
• pp.11-15
• /
• 2015

휴대용 고분자전해질 연료전지의 수소발생용으로써 $NaBH_4$는 많은 장점을 갖고 있다. 본 연구에서는 비담지 Co-B, Co-P-B 촉매의 $NaBH_4$ 가수분해 특성에 대해 연구하였다. 촉매의 BET 표면적, 수소 수율, $NaBH_4$ 농도 영향, 촉매 내구성 등을 실험하였다. 비담지 Co-B 촉매의 BET 표면적은 $75.7m^2/g$으로 FeCrAlloy에 담지한 Co-B 촉매에 비해 BET 면적이 18배 높았다. 회분식 반응기에서 비담지 촉매들은 $NaBH_4$ 20~25 wt% 사용조건에서 97.6~98.5%의 높은 수소 수율을 보였다. $NaBH_4$ 농도가 30 wt%로 증가하면서 수소수율은 95.3~97.0%로 감소하였다. 비담지 촉매의 촉매 손실율은 FeCrAlloy에 담지 촉매에 비해 낮았으며, $NaBH_4$ 농도가 증가하면서 촉매 손실율도 증가하였다. 연속 반응기에서 1.2 g 비담지 Co-P-B 촉매를 사용해서 약 $3{\ell}/min$ 발생속도로 가수분해 반응하여 90%의 수소 수율을 얻었다.

• 한국수소및신에너지학회논문집
• /
• 제22권4호
• /
• pp.451-457
• /
• 2011

Purple non-sulfur (PNS) bacterium $Rhodobacter$ $sphaeroides$ KD131 was studied with the aim of achieving maximum hydrogen production using various carbon and nitrogen sources at different pH conditions. Cells grew well and produced hydrogen using $(NH_4){_2}SO_4$ or glutamate as a nitrogen source in combination with a carbon substrate, succinate or malate. During 48h of photo-heterotrophic fermentation under 110$W/m^2$ illumination using a halogen lamp at $30^{\circ}C$, 67% of 30mM succinate added was degraded and the hydrogen yield was estimated as 3.29mol $H^2$/mol-succinate. However, less than 30% of formate was consumed and hydrogen was not produced due to a lack of genes coding for the formate-hydrogen lyase complex of strain KD131. Initial cell concentrations of more than 0.6g dry cell weight/L-culture broth were not favorable for hydrogen evolution by cell aggregation, thus leading to substrate and light unavailability. In a modified Sistrom's medium containing 30mM succinate with a carbon to nitrogen ratio of 12.85 (w/w), glutamate produced 1.40-fold more hydrogen compared to ammonium sulfate during the first 48h. However, ammonium sulfate was 1.78-fold more effective for extended cultivation of 96h. An initial pH range from 6.0 to 9.0 influenced cell growth and hydrogen production, and maintenance of pH 7.5 during photofermentation led to the increased hydrogen yield.