• 제목/요약/키워드: hydrogen behaviors

검색결과 199건 처리시간 0.027초

PEI/DGEBA 블랜드계의 열적특성 및 파괴인성 (Cure Behaviors and Fracture Toughness of PEl/Difunctional Epoxy Blends)

  • 박수진;진성열;강신영
    • 접착 및 계면
    • /
    • 제4권3호
    • /
    • pp.33-40
    • /
    • 2003
  • 본 연구에서는 이관능성 에폭시 (diglycidyl ether of bisphenol A. DGEBA)와 Polyetherimide(PEI) 블랜드를 Amime계 경화제인 DDM을 이용하여 경화를 시켰으며, PEI의 함량 변화가 순수 에폭시 수지의 열적특성과 파괴인성에 미치는 영향에 대해 고찰하였다. 경화된 시편의 열적특성은 DSC에 의한 열분석을 통해 Kissinger 식을 이용하여 경화 활성화 에너지 ($E_a$)를 구하였고, 파괴인성은 크랙성장의 저항을 나타내는 임계응력세기 인자 ($K_{IC}$)을 측정하여 알아보았다. 시편의 파단특성은 주사전자현미경 (SEM)을 통해 조사하였으며, 기계적 계면특성을 알아보기 위해 contact angle로 표면자유에너지를 측정하였다. 실험 결과 DGEBA/PEI 블랜드계의 $E_a$, $K_{IC}$는 PEI 함량이 7.5 phr에서 최대값을 보였다. 이는 PEI 도입에 따른 치밀한 네트워크 구조가 증가했기 때문으로 판단되어 진다. 또한 DGEBA/PEI 블랜드계의 표면자유에너지는 $K_{IC}$와 유사한 경향을 보였으며, 이는 에폭시의 하이드록실기와 PEI의 imide 그룹 사이의 수소결합에 의해 극성요소가 증가되었기 때문으로 판단되어진다.

  • PDF

LATEST RESULTS OF THE MAXI MISSION

  • MIHARA, TATEHIRO
    • 천문학논총
    • /
    • 제30권2호
    • /
    • pp.559-563
    • /
    • 2015
  • Monitor of All-sky X-ray Image (MAXI) is a Japanese X-ray all-sky surveyer mounted on the International Space Station (ISS). It has been scanning the whole sky since 2009 during every 92-minute ISS rotation. X-ray transients are quickly found by the real-time nova-search program. As a result, MAXI has issued 133 Astronomer's Telegrams and 44 Gamma-ray burst Coordinated Networks so far. MAXI has discovered six new black holes (BH) in 4.5 years. Long-term behaviors of the MAXI BHs can be classified into two types by their outbursts; a fast-rise exponential-decay type and a fast-rise flat-top one. The slit camera is suitable for accumulating data over a long time. MAXI issued a 37-month catalog containing 500 sources above a ~0.6 mCrab detection limit at 4-10 keV in the region ${\mid}{b}{\mid}$ > $10^{\circ}$. The SSC instrument utilizing an X-ray CCD has detected diffuse soft X-rays extending over a large solid angle, such as the Cygnus super bubble. MAXI/SSC has also detcted a Ne emission line from the rapid soft X-ray nova MAXI J0158-744. The overall shapes of outbursts in Be X-ray binaries (BeXRB) are precisely observed with MAXI/GSC. BeXRB have two kinds of outbursts, a normal outburst and a giant one. The peak dates of the subsequent giant outbursts of A0535+26 repeated with a different period than the orbital one. The Be stellar disk is considered to either have a precession motion or a distorted shape. The long-term behaviors of low-mass X-ray binaries (LMXB) containing weakly magnetized neutron stars are investigated. Transient LMXBs (Aql X-1 and 4U 1608-52) repeated outbursts every 200-1000 days, which is understood by the limit-cycle of hydrogen ionization states in the outer accretion disk. A third state (very dim state) in Aql X-1 and 4U 1608-52 was interpreted as the propeller effect in the unified picture of LMXB. Cir X-1 is a peculiar source in the sense that its long-term behavior is not like typical LMXBs. The luminosity sometimes decreases suddenly at periastron. It might be explained by the stripping of the outer accretion disk by a clumpy stellar wind. MAXI observed 64 large flares from 22 active stars (RS CVns, dMe stars, Argol types, young stellar objects) over 4 years. The total energies are $10^{34}-10^{36}$ erg $s^{-1}$. Since MAXI can measure the spectrum (temperature and emission measure), we can estimate the size of the plasma and the magnetic fields. The size sometimes exceeds the size of the star. The magnetic field is in the range of 10-100 gauss, which is a typical value for solar flares.

TiO2 함유 피치섬유의 최적 안정화 조건 (The Optimum Stabilization Conditions of TiO2-containing Pitch Fiber)

  • 엄상용;이창호;박관호;유승곤
    • Korean Chemical Engineering Research
    • /
    • 제45권3호
    • /
    • pp.269-276
    • /
    • 2007
  • $TiO_2$ 함유 피치섬유의 최적 안정화 조건을 도출하기 위하여 $TiO_2$의 함유량을 달리하여 피치섬유를 제조한 후, 여러가지 안정화 조건에 대한 섬유의 특성 변화와 금속입자의 거동을 관찰하였다. 공기에 의한 피치섬유의 안정화시 안정화온도가 높고, $TiO_2$ 함유량이 적을수록 산화에 의한 무게증가가 컸다. 안정화된 섬유를 탄화하면 수율은 71~82 wt.% 수준인데, $TiO_2$가 활성촉매 역할을 하여 $TiO_2$의 함유량이 많을수록 탄화수율은 낮았다. 안정화 과정에서 열가소성의 피치섬유는 산소의 도입으로 카르보닐기(C=O)와 카르복실기(-COOH) 등이 형성되며 동시에 이들이 가교결합을 이루고 수소를 탈리시켜 열경화성 섬유로 전환되었다. 활성탄소섬유의 기공크기는 $TiO_2$ 함유량이 증가함에 따라 점점 커졌으며, 주사전자현미경과 투과전자현미경을 통하여 섬유의 표면과 내부에 분포된 $TiO_2$ 입자와 분포를 관찰한 결과 안정화, 탄화 및 활성화공정 중 일부 $TiO_2$가 서로 뭉침을 알 수 있었다. 최종적으로 0.5 wt.% $TiO_2$ 함유 석유계 피치섬유는 $280^{\circ}C$에서 3 hr를 최적 안정화 조건으로 제시할 수 있었다.

초고속 스핀들의 내구성 향상을 위한 WC-Co 분말의 HVOF 용사 코팅 (HVOF Thermal Spray Coating of WC-Co for Durability Improvement of High Speed Spindle)

  • 김길수;백남기;윤재홍;조동율;윤석조;오상균;황순영;천희곤
    • 한국표면공학회지
    • /
    • 제39권4호
    • /
    • pp.179-189
    • /
    • 2006
  • High velocity oxygen fuel(HVOF) thermal spray coating of WC-Co powder is one of the most promising candidate for the replacement of the traditional hard chrome plating and ceramics coating because of the environmental problem of the very toxic $Cr^{6+}$ known as carcinogen and the brittleness of ceramics coating. WC-Co micron and nano powder were coated by HVOF thermal spraying method for the study of durability improvement of the high speed spindle. Coatings were planned by Taguchi program for the four spray parameters of spray distance, flow rates of hydrogen, oxygen and powder feed rate. Optimal coating process was obtained by the studies of coating properties such as porosity, surface roughness, micro hardness, and micro structure. WC-Co micron and nano powder were coated on the Inconel 718 substrate by the optimal coating process obtained in this study. The wear behaviors were studied by the sliding wear tester at room temperature and at an elevated temperature of $500^{\circ}C$ for the application to high speed spindle. Sliding wear test was carried out for four most promising hard coatings of chrome coating, ceramics coatings such as $A1_2O_3,\;Cr_2O_3$ and HVOF Co-alloy T800 for the comparison of their wear behaviors. HVOF WC-Co coating was better than other coatings showing highest micro hardness of 1400 Hv and comparable friction coefficients with others. HVOF WC-Co coating is a strong candidate for the replacement of the traditional hard chrome plating for the high speed spindle.

벤토나이트 완충재 내 기체 이동의 거동 특성 관련 연구 동향 소개 (Introduction to Researches on the Characteristics of Gas Migration Behavior in Bentonite Buffer)

  • 강신항;김정태;이창수;김진섭
    • 터널과지하공간
    • /
    • 제31권5호
    • /
    • pp.333-359
    • /
    • 2021
  • 고준위방사성폐기물 처분시스템에서는 처분용기 인근에서 용기 금속 물질의 부식 등 여러 이유로 인해 수소, 라돈 등의 기체가 발생할 수 있다. 기체 발생 속도가 투수계수가 낮은 벤토나이트 완충재 공극에서의 기체 확산 속도보다 커질 경우, 형성된 기체가 축적된다. 기체 압력이 증가하여 유입 압력에 도달하면 완충재 내부로 기체의 팽창 흐름 및 이류가 발생하게 된다. 기체의 급격한 팽창 흐름 발생 시 방사성 핵종이 완충재 외부로 유출될 가능성이 있으므로, 처분시설의 설계 과정에서 점토 기반 물질에서의 기체 유동의 영향성 및 공학적방벽의 건전성을 평가하기 위해 기체 이동 현상에 대한 거동 특성을 명확하게 규명할 필요가 있다. 전세계적으로 벤토나이트 완충재 내 기체 이동 현상 규명을 위한 실험적 연구와 이를 모사할 수 있는 전산 수치 모델 개발 연구가 활발히 진행되고 있다. 본 기술보고에서는 현재까지 수행된 기체 주입 시험 및 전산 수치모델 관련 주요연구를 소개하고 향후 기체 이동 현상 규명을 위한 연구 수행 방향에 대해 정리하였다.

촉매연소를 이용한 동심 원관형 반응기 내의 수증기 개질 반응에 관한 실험적 연구 (Experimental Study of Steam Reforming Assisted by Catalytic Combustion in Concentric Annular Reactor)

  • 강태규;유상석;김용모;안국영
    • 대한기계학회논문집B
    • /
    • 제34권4호
    • /
    • pp.375-381
    • /
    • 2010
  • 촉매연소를 열원으로 하여 수증기 개질 반응을 수행하는 동심 2중관 원관형 반응기에서의 반응 및 열전달 특성을 제시하였다. 동심 2중관 반응기는 각각 연소 촉매와 개질 촉매가 장입된 충전층 반응기로 제작하였으며 개질 반응인 흡열 반응과 발열 반응인 연소 반응의 열적 거동을 실험적으로 연구하였다. 연소용 혼합 가스는 MCFC(용융탄산염 연료전지) 연료극에서 슬립(slip)되는 합성가스를 성분별로 용량에 맞게 공급 하였으며, 개질 반응에서는 적당한 수증기/탄소비를 고정하여 실험하였다. 이 연구를 토대로 수소 생산량이 최대가 되는 개질 측 반응 온도분포를 예측하기 위한 반 경험적 고찰을 수행하였고 이는 장차 이 연구에서와 같은 연소반응과 개질반응이 복합된 수소생산용 개질기에 대한 기본설계 지침을 제시할 수 있을 것이다.

열잠재성 촉매에 의한 에폭시/폴리우레탄 블랜드계의 경화거동, 유변학적 및 기계적 물성에 관한 연구 (Studies on Cure Behaviors and Rheological and Mechanical Properties of Epoxy/Polyurethane Blend System initiated by Latent Thermal Catalyst)

  • 강준길;권수한;박수진
    • 대한화학회지
    • /
    • 제46권3호
    • /
    • pp.233-240
    • /
    • 2002
  • 본 연구에서는 잠재성 양이온 개시제 (N-benzyl pyrazinium hexafluoroantiminate, BPH)를 이용한 에폭시/폴리우레탄 블랜드계의 혼합조성에 따른 경화거동과 유변학적 특성 그리고 기계적 물성 변화에 대하여 연구하였다. 블랜드계의 반응성은 DSC를 이용하여 반응 온도에 따른 전환률을 구하여 측정하였으며, 유변학적 특성은 레오미터를 이용한 등온 실험을 통하여 측정하였고, 가교 활성화에너지(Ec)는 겔화 시간과 경화 온도를 이용하여 Arrhenius 방정식으로 구하였다. 한편, 경화된 시편의 기계적 물성은 충격강도 실험을 통하여 측정하였다. 실험결과, 블랜드계의 열잠재성 촉매로 사용된 BPH는 어떤 공개시제 없이도 우수한 촉매 특성을 나타내었다. 본 블랜드계의 가교 활성화에너지 및 충격강도는 PU가 30 wt% 첨가되었을 때 최대를 나타내었는데, 이는 EP와 PU간의 수소결합으로 인한 치밀한 가교밀도의 증가 때문이라고 사료된다.

Analysis of Sintering Behaviors in Er-doped $UO_2$

  • Kim, Han-Soo;Kim, Si-Hyung;Na, Sang-Ho;Lee, Young-Woo;Sohn, Dong-Seong
    • 한국원자력학회:학술대회논문집
    • /
    • 한국원자력학회 1996년도 춘계학술발표회논문집(3)
    • /
    • pp.231-237
    • /
    • 1996
  • Defect equilibrium equations were modelled, and the relations of P $o_2$, venus x were derived using the mass action law. The dominant defect species active in a specified region were determined by fitting the curve of experimental data to the calculated curve of log P $o_2$, versus log x for each theoretical model. The calculated curve for (2:1:2) and (Er')$^{x}$ in the hyperstoichiometric $U_{1-y}$E $r_{y}$ $O_{2+x}$ and that for (2Er'quot;)$^{x}$ $_{dec}$ in the hypostoichiometric $U_{1-y}$E $r_{y}$ $O_{2-x}$ are in good agreement with the present experimental results. The sintering behavior of Er-doped U $O_2$ is observed with erbium content in oxidizing and reducing atmospheres. For sintering in oxidizing atmosphere, sintered density decreases as increasing y in $U_{1-y}$E $r_{y}$ $O_{2+x}$. However, in hydrogen atmosphere, sintered density decreases as increasing y at lower erbium content but the density increases again above y=0.10. In oxidizing sintering conditions, the formation of (Er'U')$^{x}$ clusters hinders the diffusion of cations, and hence the sinterability of Er-doped U $O_2$ decreases. In reducing atmosphere of Er-doped U $O_2$ for higher Er concent, the oxygen vacancies make (Er')$^{x}$ cluster decompose by charge compensation and the concentration of mobile cations increases, thereby improving the sinterability.ntration of mobile cations increases, thereby improving the sinterability.ability.

  • PDF

Zr-Sn 및 Zr-Nb-Sn 합금의 부식특성에 관한 연구 (Study on Corrosion Characteristics of Zr-Sn and Zr-Nb-Sn Alloys)

  • 전치중;정용환;김선진
    • 한국재료학회지
    • /
    • 제9권4호
    • /
    • pp.378-385
    • /
    • 1999
  • 핵 연료 피복관 재료로 샤용되고 었는 Zr 합금의 부식특성을 개선하기 위하여 Zn-xSn 2원계 합금과 Zr-0.4Nb-xSn 3원계 합금을 제조하여 부식특성을 평가하였다. 부식 실험은 $360^{\circ}C$ 물 분위기의 mini-autoclave에서 수행하였다. 2원계 합금의 경우 Sn이 0.5, 0.8, 1.5wt.% 첨가된 합금에서는 15일에서 속도천이가 발생한 후 급격한 부식 가속 현상이 나타녔으나, 2.0wt.% 가 첨가된 합금의 경우 80일까지의 부식 실험에서도 천이 현상을 보이지 않는 매우 높은 부식 저항성을 보였다. 3원계 합금에서는 Sn 함량이 증가할수록 부식이 증가하는 경향을 보였다. 이러한 경향은 2원계 합금과 3원계 합금에서 Sn의 고용도 차, 미량 첨가된 Nb의 영향 및 석출물의 특성과 관련이 잇는 것으로 생각된다. 또한 Zr-xSn, Zr-O.4Nb-xSn 합금의 부식은 tetragonal-$ZrO_2$의 분율과 수소 흡수율에 의해서 제어될 수도 있다.

  • PDF

Electrochemical Behavior of Redox Proteins Immobilized on Nafion-Riboflavin Modified Gold Electrode

  • Rezaei-Zarchi, S.;Saboury, A.A.;Hong, J.;Norouzi, P.;Moghaddam, A.B.;Ghourchian, H.;Ganjali, M.R.;Moosavi-Movahedi, A.A.;Javed, A.;Mohammadian, A.
    • Bulletin of the Korean Chemical Society
    • /
    • 제28권12호
    • /
    • pp.2266-2270
    • /
    • 2007
  • Electron transfer of a redox protein at a bare gold electrode is too slow to observe the redox peaks. A novel Nafion-riboflavin functional membrane was constructed during this study and electron transfer of cytochrome c, superoxide dismutase, and hemoglobin were carried out on the functional membrane-modified gold electrode with good stability and repeatability. The immobilized protein-modified electrodes showed quasireversible electrochemical redox behaviors with formal potentials of 0.150, 0.175, and 0.202 V versus Ag/AgCl for the cytochrome c, superoxide dismutase and hemoglobin, respectively. Whole experiment was carried out in the 50 mM MOPS buffer solution with pH 6.0 at 25 oC. For the immobilized protein, the cathodic transfer coefficients were 0.67, 0.68 and 0.67 and electron transfer-rate constants were evaluated to be 2.25, 2.23 and 2.5 s?1, respectively. Hydrogen peroxide concentration was measured by the peroxidase activity of hemoglobin and our experiment revealed that the enzyme was fully functional while immobilized on the Nafion-riboflavin membrane.