• Elastomers and Composites
• /
• v.39 no.1
• /
• pp.42-50
• /
• 2004

In this work, the diglycidylether of bisphenol A (DGEBA) and modified polyurethane (PU) blends were initiated by N-benzylpyrazinium hexafluoroantimonate (BPH). The cure and fracture toughness of neat DGEBA with the addition of PU were investigated. The cure properties of DGEBA/PU blend system were examined by DSC and near-IR measurements. The fracture touhtness were investigated by measuring the critical stress intensity factor ($K_{IC}$) and the critical strain energy release rate ($G_{IC}$). According to the results, the maximum values of owe activation energy ($E_a$) and conversion (${\alpha}$) were found at 10 phr of PU. Also the $K_{IC}$ showed a similar behavior with the results of conversion. These results were probably due to increase of crosslinking density in the blends resulted from increase of the hydrogen bonding between the hydroxyl groups of DGEBA and isocyanate groups of PU.

• Analytical Science and Technology
• /
• v.10 no.5
• /
• pp.315-324
• /
• 1997

The retention behaviors of 16 PAHs and 4 nitro-PAHs were studied with several parameters involved numbers of carbon atoms, F factor, aqueous solubility, L/B ratio, and numbers of interfering hydrogen atom pairs on the chemical structures of PAHs by using reversed-phase liquid chromatography/diode array detection method (RPLC/DAD) and gradient elution method. It was obtain that the log k' for most of PAHs with increasing the number of carbon and the F factor in their molecules. Chromatographic retention of PAH isomers and nitro-PAHs were examined with aqueous solubility, L/B ratio and number of interfering hydrogen atom pairs. As a result of comparison with these factors and retention times, it was found that those solutes having larger aqueous solubilities and greater L/B ratios were retained longer on stationary phase. This tendency was also occured in the molecules having the more number of interfering hydrogen atom pairs. Detection limits of PAHs which were obtained with three times measurements by RPLC/DAD were in the range of 100~500ng/mL and method detection limit(MDL) for water sample were in the range of 0.1~0.5ng/mL.

• Journal of the Korean Society of Combustion
• /
• v.21 no.4
• /
• pp.48-60
• /
• 2016

Experimental and numerical studies were conducted to investigate flame behaviors near flammable limits for downstream-interacting SNG-air premixed flames in a counter-flow configuration. The SNG fuel consisted of a methane, a propane, and a hydrogen with volumetric ratios of 91, 6, and 3%, respectively. The most appropriate priority for some reliable reaction mechanisms examined was given to the mechanism of UC San diego via comparison of lean extinction limits attained numerically with experimental ones. Flame stability map was presented with a functional dependencies of lower and upper methane concentrations in terms of global strain rate. The results show that, at the global strain rate of $30s^{-1}$, lean extinction boundary is slanted while rich extinction one is relatively less inclined because of the dependency of such extinction boundary shapes on deficient reactant Lewis number governed by methane mainly. Further increase of global strain rate forces both extinction boundaries to be more slanted and to be shrunk, resulting in an island of extinction boundary and subsequently one flame extinction limit. Extinction mechanisms for lean and rich, symmetric and asymmetric extinction boundary were identified and discussed via heat losses and chemical interaction.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.2
• /
• pp.91-97
• /
• 2003

The behaviors of diamond deposition using microwave plasma chemical vapor deposition method have been studied by varying the concentration of methane in the methane - hydrogen gas mixture. The carbonization is checked from peak intensities of D($sp^3$) and G($sp^2$) peaks in Raman spectra. The hydronization and C-H bonding status in films can also be determined from FTIR results. Both the bonding strength of C-H and the ratio of $sp^3$ to $sp^2$ in bonding are found to be slightly dependent of partial pressure of $CH_4$ Judging from above results, we can conclude that the best value for partial pressure of $CH_4$ in growing process of thick films is about 13.8%.

• Analytical Science and Technology
• /
• v.24 no.2
• /
• pp.113-118
• /
• 2011

When butyl rubber dissolved in toluene was used as a binder of carbon powder, carbon paste showed a mechanical hardness due to the fast volatility of the solvent just after the electrode fabrication. With a view of validating its quantitative electrochemical behaviors, its kinetic parameters, e.g. the symmetry factor, the exchange current density, the capacity of the double layer, the Michaelis constant, the time constant and other factors were investigated. Our experimental facts indicated that butyl rubber is available for a promising binder of carbon powder.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.11
• /
• pp.3244-3248
• /
• 2014

Two ethylenediamine cobalt(II) oxalate complexes Co(ox)(en), 1 and $Co(ox)(en){\cdot}2H_2O$, 2 have been hydrothermally synthesized and characterized by single crystal X-ray diffraction, IR spectrum, TG analysis, and magnetic measurements. In 1, Co atoms are coordinated by two bis-bidentate oxalate ions in transconfiguration to form Co(ox) chains, which are further bridged by ethylenediamine molecules to produce 2D grid layers, Co(ox)(en). In 2, Co atoms are coordinated by bridging oxalate ions in cis-configuration to form Co(ox) chains, and the additional chelation of ethylenediamine to Co atoms completes 1D zigzag chain, Co(en)(ox). Two lattice water molecules stabilize the chains through hydrogen bonding. Magnetic susceptibility measurements indicate that both complexes exhibit weak antiferromagnetic coupling between cobalt(II) ions with the susceptibility maxima at 23 K for 1 and 20 K for 2, respectively. In 1 and 2, the oxalate ligands afford a much shorter and more effective pathway for the magnetic interaction between cobalt ions compared to the ethylenediamine ligands, so the magnetic behaviors of both complexes could be well described with 1D infinite magnetic chain model.

• Journal of Photoscience
• /
• v.3 no.3
• /
• pp.153-158
• /
• 1996

The effects of $\alpha$- and $\beta$-cyclodextrins (CD) on the twisted intramolecular charge transfer (TICT) behavior of p-N,N'-dimethylaminobenzoic acid (DMABA) in buffered aqueous solution have been investigated by examining formation and decay behaviors of the TICT-typical dual fluorescence. The ratio of the TICT emission to the normal emission (I$_a$/I$_b$) increases linearly $\alpha$-CD concentration increases, while in the presence of $\beta$-CD it shows nonlinear dependences on the CD concentration. The analysis of the CD-dependent changes of the I$_a$/I$_b$ and absorption spectra demonstrates formation of 1:1 inclusion complexes between DMABA and CDs. The decay time of the normal emission (ca. 700 ps) is little affected by the formation of $\alpha$-CD inclusion complex, whereas it increases upto ca. 1.6 ns upon formation of $\beta$-CD inclusion complex. The TICT emission for the $\beta$-CD inclusion complex exhibits two decay components while it shows a single component for the $\alpha$-CD inclusion complex, indicating formation of one or two types of inclusion complex in the presence of $\alpha$-CD or $\beta$-CD, respectively. These results are attributed to the CD cavity size dependence on patterns of complexation between CDs and DMABA. The CD size dependences of the TICT fluorescence properties with the orientation of the guest molecule demonstrate that the specific hydrogen bonding between the carboxylic acid group and water plays an important role in the excited-state TICT.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.6
• /
• pp.515-520
• /
• 2005

CMP(chemical mechanical polishing) process has been attracted as an essential technology of multi-level interconnection. Also CMP process got into key process for global planarization in the chip manufacturing process. In this study, potentiodynamic polarization was carried out to investigate the influences of $H_2O_2$ concentration and metal oxide formation through the passivation on tungsten and titanium. Fortunately, the electrochemical behaviors of tungsten and titanium are similar, an one may expect. As an experimental result, electrochemical corrosion of the $5\;vol\%\;H_2O_2$ concentration of tungsten and titanium films was higher than the other concentrations. According to the analysis, the oxidation state and microstructure of surface layer were strongly influenced by different oxidizer concentration. Moreover, the oxidation kinetics and resulting chemical state of oxide layer played critical roles in determining the overall CMP performance. Therefore, we conclude that the CMP characteristics tungsten and titanium metal layer including surface roughness were strongly dependent on the amounts of hydrogen peroxide oxidizer.

• Journal of the Korean institute of surface engineering
• /
• v.45 no.6
• /
• pp.272-277
• /
• 2012

The hull of a fast sailing aluminium ship are generally prone to erosion owing to the impact of seawater. At this time, synergistic effects of the erosion and the corrosion by aggressive ions such as chlorides tend to aggravate the damage. There have been various attempts, including selection of erosion-resistant materials, cathodic protection and addition of corrosion inhibitors, to overcome damage by erosion or corrosion under marine environments. These approaches, however, have limits on identifying the damage mechanism clearly, because they depend on analogical interpretation by correlating two damage behaviors after the individual studies are assessed. In this research, it was devised a hybrid testing apparatus that integrates electrochemical corrosion test and cavitation test, and thus the erosion-corrosion behavior by cavitation was investigated more reliably. As a result, the slightest damage was observed at the potentials between -1.6 V and -1.5 V. This is considered to be due to a reflection or counterbalancing effect caused by collision of the cavitation cavities and the hydrogen gas formed by activation polarization.

• Nuclear Engineering and Technology
• /
• v.40 no.6
• /
• pp.489-496
• /
• 2008

Ferrocyanide-anion exchange resin was prepared and the prepared ion exchange resins were tested on the ability to uptake $Cs^+$ ion. The prepared ion exchange resins were resin-KCoFC, resin-KNiFC, and resin-KCuFC. The three tested ion exchange resins showed ion exchange selectivity on the $Cs^+$ ion of the surrogate soil decontamination solution, and resin-KCoFC showed the best $Cs^+$ ion uptake capability among the tested ion exchange resins. The ion exchange behaviors were explained well by the modified Dubinin-Polanyi equation. A regeneration feasibility study of the spent ion exchange resins was also performed by the successive application of hydrogen peroxide and hydrazine. The desorption of the $Cs^+$ ion from the ion exchange resin satisfied the electroneutrality condition in the oxidation step; the desorption of the $Fe^{2+}$ ion in the reduction step could also be reduced by adding the $K^+$ ion.