• 한국재료학회지
• /
• 제18권11호
• /
• pp.628-633
• /
• 2008

ZnO nanopowders were synthesized by the sol-gel method using hydrazine reduction, and their gas responses to 6 gases (200 ppm of $C_2H_5OH$, $CH_3COCH_3$, $H_2$, $C_3H_8$, 100 ppm of CO, and 5 ppm of $NO_2$) were measured at $300\;{\sim}\;400^{\circ}C$. The prepared ZnO nanopowders showed high gas responses to $C_2H_5OH$ and $CH_3COCH_3$ at $400^{\circ}C$. The sensing materials prepared at the compositions of [$ZnCl_2$]:[$N_2H_4$]:[NaOH] = 1:1:1 and 1:2:2 showed particularly high gas responses ($S\;=\;R_a/R_g,\;R_a$ : resistance in air, $R_g$ : resistance in gas) to 200 ppm of $C_2H_5OH$($S\;=\;102.8{\sim}160.7$) and 200 ppm of $CH_3COCH_3$($S\;= 72.6{\sim}166.2$), while they showed low gas responses to $H_2$, $C_3H_8$, CO, and $NO_2$. The reason for high sensitivity to these 2 gases was discussed in relation to the reaction mechanism, oxidation state, surface area, and particle morphology of the sensing materials.

• 대한화학회지
• /
• 제35권2호
• /
• pp.179-183
• /
• 1991

• Bulletin of the Korean Chemical Society
• /
• 제12권6호
• /
• pp.709-709
• /
• 1991

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 추계학술논문요약집
• /
• pp.422-423
• /
• 2018

• Bulletin of the Korean Chemical Society
• /
• 제10권3호
• /
• pp.315-316
• /
• 1989

• Bulletin of the Korean Chemical Society
• /
• 제6권5호
• /
• pp.320-320
• /
• 1985

• 공업화학
• /
• 제26권1호
• /
• pp.99-103
• /
• 2015

본 연구에서는, 그래핀 옥사이드(GO)의 환원에 가장 보편적으로 사용되는 3종류의 환원제를 사용하여 환원 그래핀 옥사이드(RGO)를 제조하였다. 합성된 3종류 RGO의 화학적 구조를 비교/분석하여 구조적 특징에 따른 전도도 및 분산성의 차이를 고찰하였다. Ethylene glycol을 사용한 경우에는 환원도가 낮고 전도도도 상대적으로 낮았다. 반면에 hydrazine과 thiourea dioxide (TU)를 사용하여 합성한 RGO에서는 환원 정도, 전도도 및 물에서의 분산성 등에 차이가 거의 없었다. 그러나 N-methylpyrrolidone에서의 분산성은 TU에 의해 합성된 RGO에서 가장 우수하여 4개월 후에도 안정적인 분산액을 유지하였다.

• Bulletin of the Korean Chemical Society
• /
• 제33권9호
• /
• pp.2961-2965
• /
• 2012

Mesoporous carbons with tailored pore size were prepared by using sucrose as the carbon source and silicas as the templates. The silica templates were obtained from a hydroxypropyl-${\beta}$-cyclodextrin-silica hybrids using ammonium perchlorate oxidation at different temperatures to remove the organic matter. The structures and surface chemistry properties of these carbon materials were characterized by $N_2$ adsorption, TEM, SEM and FTIR measurements. The catalytic performances of these carbon materials were investigated through the reduction of nitroaromatic using hydrazine hydrate as the reducing agent. Compared with other carbon materials, such as active carbon, and carbon materials from the silica templates obtained by using calcination to remove the organic matter, these carbon materials exhibited much higher catalytic activity, no obvious deactivation was observed after recycling the catalyst four times. Higher surface area and pore volume, and the presence of abundant surface oxygen-containing functional groups, which originate from the special preparation process of carbon material, are likely responsible for the high catalytic property of these mesoporous carbon materials.

• 한국군사과학기술학회지
• /
• 제17권2호
• /
• pp.282-288
• /
• 2014

In this research, we investigated synthetic method of 2,6-DANT that can be used as a chain extender of urethane/urea and epoxy materials in a demilitarization method via chemical transformations considering environmental, economical aspects and stability of process. We was able to identify through GC monitoring that 2,4-DANT and 2,6-DANT were produced when we inject 'hydrazine monohydrate 3.3 eq. by TNT 1 eq.' with a fine metering pump for 30 minutes and then, reflux for an additional 2 hours. We was able to isolate only 2,6-DANT(99.3% purity and 45.0% yield) from mixture of 2,4-DANT and 2,6-DANT through the separating and refining methods using 2,6-DANT solubility in methanol and crystallinity of 2,6-DANT.

• Corrosion Science and Technology
• /
• 제15권2호
• /
• pp.92-107
• /
• 2016

Graphene was coated on austenitic and martensitic stainless steels to simulate the metallic bipolar plate of proton exchange membrane fuel cell (PEMFC). Graphene oxide (GO) was synthesized and was reduced to reduced graphene oxide (rGO) via a hydrazine process. rGO was confirmed by FE-SEM, Raman spectroscopy and XPS. Interfacial contact resistance (ICR) between the bipolar plate and the gas diffusion layer (GDL) was measured to confirm the electrical conductivity. Both ICR and corrosion current density decreased on graphene coated stainless steels. Corrosion resistance was also improved with immersion time in cathodic environments and satisfied the criteria of the Department of Energy (DOE), USA. The total concentrations of metal ions dissolved from graphene coated stainless steels were reduced. Furthermore hydrophobicity was improved by increasing the contact angle.