• Earthquakes and Structures
• /
• 제5권4호
• /
• pp.417-438
• /
• 2013

This study was concerned on the application of a hybrid approach for analyzing the buried pipelines deformations subjected to earthquakes. Nonlinear time-history analysis of Finite Element (FE) model of buried pipelines, which was modeled using laboratory data, has been performed via selected earthquakes. In order to verify the FE model with experiments, a statistical test was done which demonstrated a good conformity. Then, the FE model was developed and the optimum intersection angle of pipeline and fault was obtained via genetic algorithm. Transient seismic strain of buried pipeline in the optimum intersection angle of pipeline and fault was investigated considering the pipes diameter, the distance of pipes from fault, the soil friction angles and seismic response duration of buried pipelines. Also, a two-layer perceptron Artificial Neural Network (ANN) was trained using results of FE model, and a nonlinear relationship was obtained to predict the bending strain of buried pipelines based on the pipes diameter, intersection angles of the pipelines and fault, the soil friction angles, distance of pipes from the fault, and seismic response duration; whereas it contains a wide range of initial input data without any requirement to laboratory measurements.

• ETRI Journal
• /
• 제35권5호
• /
• pp.786-796
• /
• 2013

In this paper, we propose a hybrid time-division multiplexing and dense wavelength-division multiplexing scheme to implement a cost-effective and scalable long-reach optical access network (LR-OAN). Our main objectives are to increase fiber plant utilization, handle upstream and downstream flow through the same input/output port, extend the reach, and increase the splitting ratio. To this end, we propose the use of an arrayed waveguide grating (AWG) and an erbium-doped fiber amplifier (EDFA) in one configuration. AWG is employed to achieve the first and second objectives, while EDFA is used to achieve the third and fourth objectives. The performance of the proposed LR-OAN is verified using the Optisystem and Matlab software packages under bit error rate constraints and two different approaches (multifiber and single-fiber). Although the single-fiber approach offers a more cost-effective solution because service is provided to each zone via a common fiber, it imposes additional losses, which leads to a reduction in the length of the feeder fiber from 20 km to 10 km.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 춘계 학술대회논문집
• /
• pp.119-125
• /
• 2004

Unsteady nonlinear wave motions on the free surface over a plane beach of constant slope are numerically simulated using a finite difference method in rectangular grid system. Two-dimensional Navier-Stokes equations and the continuity equation are used for the computations. Irregular leg lengths and stars are employed near the boundaries of body and free surface to satisfy the boundary conditions. Also, the free surface which consists of markers or segments is determined every time step with the satisfaction of kinematic and dynamic free surface conditions. Moreover, marker-density method is also adopted to allow plunging jets impinging on the free surface. The second-order Stokes wave theory and solitary wave theory are employed for the generation of waves on the inflow boundary. For the simulation of wave breaking phenomena, the computations are carried out with the plane beach of constant slope in surf zone. The results are compared with each other. The marker-density method is better then the hybrid method. Also they are compared with other existing experimental results. The Agreement between the experimental data and the computation results is good.

• Earthquakes and Structures
• /
• 제9권4호
• /
• pp.719-733
• /
• 2015

Seismic risk management of the built environment is integrated by two main stages, the assessment and the remedial measures to attain its reduction, representing both stages a complex task. The seismic risk of a certain structure located in a seismic zone is determined by the conjunct of the seismic hazard and its structural vulnerability. The hazard level mainly depends on the proximity of the site to a seismic source. On the other hand, the ground shaking depends on the seismic source, geology and topography of the site, but definitely on the inherent earthquake characteristics. Seismic hazard characterization of a site under study is suggested to be estimated by a combination of studies with the history of earthquakes. In this Paper, the most important methods of seismic vulnerability evaluation of buildings and their application are described. The selection of the most suitable method depends on different factors such as number of buildings, importance, available data and aim of the study. These approaches are classified in empirical, analytical, experimental and hybrid. For obtaining more reliable results, it is recommends applying a hybrid approach, which consists of a combination between methods depending on the case. Finally, a recommended approach depending on the building importance and aim of the study is described.

• Structural Engineering and Mechanics
• /
• 제86권5호
• /
• pp.621-633
• /
• 2023

Stability analysis and support system estimation of the Beheshtabad water transmission tunnel is investigated in this research. A combination approach based on the rock mass rating (RMR) and rock mass quality index (Q) is used for this purpose. In the first step, 40 datasets related to the petrological, structural, hydrological, physical, and mechanical properties of tunnel host rocks are measured in the field and laboratory. Then, RMR, Q, and height of influenced zone above the tunnel roof are computed and sorted into five general groups to analyze the tunnel stability and determine its support system. Accordingly, tunnel stand-up time, rock load, and required support system are estimated for five sorted rock groups. In addition, various empirical relations between RMR and Q i.e., linear, exponential, logarithmic, and power functions are developed using the analysis of variance (ANOVA). Based on the significance level (sig.), determination coefficient (R²) and Fisher-test (F) indices, power and logarithmic equations are proposed as the optimum relations between RMR and Q. To validate the proposed relations, their results are compared with the results of previous similar equations by using the variance account for (VAF), root mean square error (RMSE), mean absolute percentage error (MAPE) and mean absolute error (MAE) indices. Comparison results showed that the accuracy of proposed RMR-Q relations is better than the previous similar relations and their outputs are more consistent with actual data. Therefore, they can be practically utilized in designing the tunneling projects with an acceptable level of accuracy and reliability.

• 에너지공학
• /
• 제26권2호
• /
• pp.99-120
• /
• 2017

한국지역난방공사 SS지사에서는 시설용량 전기 99MW, 열 98Gcal/h 규모의 열병합(Combined Heat & Power) 발전소를 구역전기사업으로 운영하고 있다. 이 지역은 경기불황과 수요감소로 하절기 6~9월 사이에 잉여열 처리문제가 발생하여 발전기를 가동하기 곤란한 상황이므로 경제성 있는 에너지 신사업모델 개발이 절실하다. 본 연구에서는 이곳의 실제 운영자료를 기반으로 신재생 에너지 하이브리드 시스템을 도입하여 최적화 운영모델을 개발하고자 한다. 특히 신재생에너지 중에서도 입지제약이 작고 열과 전기를 동시에 생산할 수 있는 연료전지(Fuel Cell)발전과 대표적인 신재생에너지인 태양광(Photovoltaic)발전과 심야발전시 전력을 저장하여 주간에 전력을 방출 할 수 있는 ESS(Energy Storage System)의 조합을 검토하였다. 이에 따른 최적화 모델 선정은 HOMER(Hybrid Optimization of Multiple Energy Resources) 프로그램을 활용하였다. 경제성 분석을 수행한 결과, 순 현재비용(NPC) 측면에서는 기존의 99MW 열병합발전이 가장 경제적이지만 신재생에너지를 사용하여 발생되는 탄소배출권 거래와 REC(Renewable Energy Certificate) 거래를 포함한 측면에서는 99MW의 CHP와 5MW의 연료전지, 521kW의 태양광을 하이브리드 시켜서 전력과 열을 공급하는 것이 99MW의 CHP 열병합발전만으로 전력과 열을 공급하는 것보다 최대 2,475억원 경제적인 것으로 나타났다. 구역전기사업에서 최적화 공정모델로 연료전지와 신재생에너지 하이브리드 시스템을 도입함으로써 경제성을 개선시킬 수 있는 결과를 확인하였다.

• 한국통신학회논문지
• /
• 제40권10호
• /
• pp.1900-1911
• /
• 2015

본 논문에서는 무선 센서 네트워크 환경에서 전력의 제약이 있는 센서들의 장거리통신을 가능케 하는 backscatter 통신에 대해 소개하고, 이를 접목해 무선전력 통신네트워크(wireless-powered communication networks, WPCN)의 doubly near-far 문제를 해결하는 방안을 논의한다. Backscatter에 기반한 WPCN에서 유저들은 하이브리드 엑세스 지점으로부터 전송되는 신호와 반송파 송신기로부터 전송되는 반송파 신호로부터 에너지를 수집한 후, 주파수 편이 변조를 이용한 반송파 신호의 반사를 통해 정보를 전송하게 된다. 위의 통신환경에서 energy-free 조건과 신호대 잡음비 outage 영역을 정의한다. 또한 본 논문에서는 에너지 수집과 정보 전송을 위한 최적의 시간 할당 방법을 제안하고, 이를 통해 시스템 전체의 정보전송 효율을 최대화할 수 있는 backscatter 기반의 수집 후 전송 프로토콜을 설계한다. 실험결과를 통해 제안한 backscatter 기법이 종래의 WPCN에 비해 광범위한 서비스 영역과 축소된 신호대 잡음비 outage 영역을 갖는 것을 보였고, 정보전송 효율을 최대화할 수 있음을 보였다.

• 대한건축학회논문집:계획계
• /
• 제33권12호
• /
• pp.105-112
• /
• 2017

Through various media, damage of both smoking and second-hand smoking has been recognized, and brought global scale of interest in antismoking. In Korea, government has tightened regulations of smoking in non-smoking zone since December, 1980, and after National Health Promotion Act in 1995, non-smoking zone has been gradually expanded. On the other hand, there were law suits to find those regulation towards smokers are either unconstitutional or not for 4 times. In this current state, people need smoking area to prevent second-hand smoking and to consider smokers in multi-unit dwelling. Main purpose of this research is to plan smoking spaces based on various typology of multi-dwelling plan for protection of both smokers and non-smokers' right. The research group collected and analyzed the smoking behaviors in various multi-unit dwelling types such as flat type, tower type, hybrid type and others. Based on those data, the group found three phenomena. First, there are internal regulations in multi-unit dwelling to make non-smoking zone based on National Health Promotion Act and resident representative meeting decision. Second, main smoking activities are occurring at major traffic line and entrances. Third, smoking inside of multi-unit dwelling complex causes second-hand smoking to residents live in $1^{st}$ floor and when they enter. Therefore, one can achieve both smokers' and non-smokers' protection of right by creating a designated smoking space near main entrances of multi-unit dwelling complex to consider smokers' and prevents second-hand smoking by using shaft space, which is in core space, to ventilate tobacco smoke through roof.

• 대한기계학회논문집B
• /
• 제37권7호
• /
• pp.683-693
• /
• 2013

본 연구에서는 혼성 격자볼츠만 방법(HLBM)을 이용하여 상판이 일정한 속도로 움직이는 공동 형상 내부에서의 혼합 특성에 대하여 수치적으로 연구하였다. 먼저, 공동 형상에서 기존의 신뢰성 있는 유동장 결과와의 비교를 통해 LB-SRT 모델과 LB-MRT 모델의 신뢰성을 검토하였다. 두 모델 모두 기존의 연구결과와 유사한 결과를 보였으나, LB-MRT 모델이 LB-SRT 모델보다 높은 Re수에서는 수치적 안정성이 높은 것을 확인하였다. 수치적 안정성이 좋은 LB-MRT 모델을 토대로 유한차분법을 적용한 HLBM을 이용하여 공동 형상 내부에서의 농도장을 수치 해석하였다. Re수와 Pe수를 변화하여 공동 형상 내부의 혼합 특성과 물질 전달 형태에 대하여 파악하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권4호
• /
• pp.99-106
• /
• 2012

본 연구는 콘크리트의 열전도 역문제의 해를 통해 온도의존적 열전도도를 추정하는 방법을 제안하였다. 온도의존적 열전도도의 추정은 실물모형 화재실험에서 측정된 하이브리드 섬유보강 쉴드터널 라이닝의 시간 및 깊이별 온도분포 데이터를 이용하였다. 추정된 온도의존적 열전도도는 실험시간이 짧은 시점에서는 상온 영역에서 열전도도의 급격한 감소가 나타나는 것으로 추정되었다. 반면 깊이 25mm 위치에서 최대온도가 측정된 실험시간대에서는 온도에 따른 콘크리트의 특성변화 및 강섬유 혼입 효과를 반영하고 있다. 따라서 온도의존적 열전도도 추정 시 가열면 부근에서 최대온도가 측정된 시점을 기준으로 실험시간을 결정해야 한다. 추정된 열전도도는 유사배합을 사용한 기존연구와 유사한 결과를 나타내고 있다.