• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.3
• /
• pp.245-250
• /
• 2017

Worldwide environmental regulations have been enhanced for emission reduction of greenhouse gases and air pollutants; accordingly, some measures were prepared. Furthermore, the need for effective and reasonable energy-saving methods is growing in accordance with that for environmental pollution minimization. In the case of marine engineering, techniques for the development of eco-friendly vessels have been actively studied, including reduction of exhaust gas emissions, development of alternative fuel, and development of a new propulsion system. In this study, we presented the basic concepts and analyzed the speed, current, voltage, and output power characteristics of each operating mode, i.e., operating mode of battery, generator, and full power.

• Tunnel and Underground Space
• /
• v.27 no.6
• /
• pp.406-421
• /
• 2017

This study describes a precise numerical analysis process by adopting the real image of mine openings obtained by LIDAR, which can produce a point cloud data by measuring the target surface numerically. Research area is a section of underground limestone mine which is used hybrid room-and-pillar method for improving the production rate. From the application of LIDAR to this section several results were deduced, that is, the central axis of upper and lower vertical safety pillars is distorted to the direction of NW and the section area of lower vertical safety pillar is $34m^2$ smaller than the designed area of $100m^2$. The results of precise measurement in geometrical shape of mine openings and precise simulation in numerical analysis confirms that LIDAR techniques can be suggested as a valuable tool for stability analysis in underground mine by configuring the mine opening shape.

• Journal of Chest Surgery
• /
• v.50 no.1
• /
• pp.1-7
• /
• 2017

Complex lesions of the thoracic aorta are traditionally treated in 2 surgical steps with the elephant trunk technique. A relatively new approach is the frozen elephant trunk (FET) technique, which potentially allows combined lesions of the thoracic aorta to be treated in a 1-stage procedure combining endovascular treatment with conventional surgery using a hybrid prosthesis. These are very complex and time-consuming operations, and good results can be obtained only if appropriate strategies for myocardial, cerebral, and visceral protection are adopted. However, the FET technique is associated with a non-negligible incidence of spinal cord injury, due to the extensive coverage of the descending aorta with the excessive sacrifice of intercostal arteries. The indications for the FET technique include chronic thoracic aortic dissection, acute or chronic type B dissection when endovascular treatment is contraindicated, chronic aneurysm of the thoracic aorta, and chronic aneurysm of the distal arch. The F ET technique is also indicated in acute type A aortic dissection, especially when the tear is localized in the aortic arch; in cases of distal malperfusion; and in young patients. In light of the great interest in the FET technique, the Vascular Domain of the European Association for cardio-thoracic Surgery published a position paper reporting the current knowledge and the state of the art of the FET technique. Herein, we describe the surgical techniques involved in the FET technique and we report our experience with the F ET technique for the treatment of complex aortic disease of the thoracic aorta.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.5
• /
• pp.1316-1332
• /
• 2012

Formation flying is an important technology that enables high cost-effective organization of outer space aircrafts. The ad-hoc wireless network based on direct-sequence ultra-wideband (DS-UWB) techniques is seen as an effective means of establishing wireless communication links between aircrafts. In this paper, based on the theory of matched filter and error bits correction, a hybrid detection algorithm is proposed for realizing multiuser detection (MUD) when the DS-UWB technique is used in the ad-hoc wireless network. The matched filter is used to generate a candidate code set which may contain several error bits. The error bits are then recognized and corrected by an novel error-bit corrector, which consists of two steps: code mapping and clustering. In the former step, based on the modified optimum MUD decision function, a novel mapping function is presented that maps the output candidate codes into a feature space for differentiating the right and wrong codes. In the latter step, the codes are clustered into the right and wrong sets by using the K-means clustering approach. Additionally, in order to prevent some right codes being wrongly classified, a sign judgment method is proposed that reduces the bit error rate (BER) of the system. Compared with the traditional detection approaches, e.g., matched filter, minimum mean square error (MMSE) and decorrelation receiver (DEC), the proposed algorithm can considerably improve the BER performance of the system because of its high probability of recognizing wrong codes. Simulation results show that the proposed algorithm can almost achieve the BER performance of the optimum MUD (OMD). Furthermore, compared with OMD, the proposed algorithm has lower computational complexity, and its BER performance is less sensitive to the number of users.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.158-158
• /
• 2012

A new kind of organic-inorganic hybrid polymer, poly(tetraphenyl)silole siloxane (PSS), was invented and synthesized for realization of its unique charge trap properties. The organic portions consisting of (tetraphenyl)silole rings are responsible for electron trapping owing to their low-lying LUMO, while the Si-O-Si inorganic linkages of high HOMO-LUMO gap provide the intrachain energy barrier for controlling electron transport. Such an alternation of the organic and inorganic moieties in a polymer may give an interesting quantum well electronic structure in a molecule. The PSS thin film was fabricated by spin-coating of the PSS solution in THF organic solvent onto Si-wafer substrates and curing. The electron trapping of the PSS thin films was confirmed by the capacitance-voltage (C-V) measurements performed within the metal-insulator-semiconductor (MIS) device structure. And the quantum well electronic structure of the PSS thin film, which was thought to be the origin of the electron trapping, was investigated by a combination of theoretical and experimental methods: density functional theory (DFT) calculations in Gaussian03 package and spectroscopic techniques such as near edge X-ray absorption fine structure spectroscopy (NEXAFS) and photoemission spectroscopy (PES). The electron trapping properties of the PSS thin film of quantum well structure are closely related to intra- and inter-polymer chain electron transports. Among them, the intra-chain electron transport was theoretically studied using the Atomistix Toolkit (ATK) software based on the non-equilibrium Green's function (NEGF) method in conjunction with the DFT.

• Journal of the Institute of Convergence Signal Processing
• /
• v.17 no.1
• /
• pp.46-52
• /
• 2016

LTE-Advanced system consisting of the number of cells in the cellular environment because it is built to allow efficient use of limited frequency resources of adjacent cell interference avoidance should be considered. Transition services in accordance with the development of the mobile communication technology, wireless multimedia content from voice-centric mobile communications services and causing a lot of mobile data traffic, such as smart phones and tablet terminals spread of a data-driven surge in mobile data traffic base stations in urban areas by increasing became a reality that can not be prevented. In this paper, we propose a new Hybrid resource allocation technique for improving the performance of the cell boundary and analyzed the performance of the proposed new techniques to perform the simulation using LTE-Advanced system level simulator based on 19cell of cellular system model.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.105-105
• /
• 2016

Recently, high power impulse magnetron sputtering (HIPIMS) has attracted considerable attentions due to its high potential for industrial applications. By pulsing the sputtering target with high power density and short duration pulses, a high plasma density and high ionization of the sputtered species can be obtained. HIPIMS has exhibited several merits such as increased coating density, good adhesion, microparticle-free and smooth surface, which make the HIPIMS technique desirable for synthesizing hard coatings. However, hard coatings present intrinsic defects (columnar structures, pinholes, pores, discontinuities) which can affect the corrosion behavior, especially when substrates are active alloys like steel or in a wear-corrosion process. Atomic layer deposition (ALD), a CVD derived method with a broad spectrum of applications, has shown great potential for corrosion protection of high-precision metallic parts or systems. In ALD deposition, the growth proceeds through cyclic repetition of self-limiting surface reactions, which leads to the thin films possess high quality, low defect density, uniformity, low-temperature processing and exquisite thickness control. These merits make ALD an ideal candidate for the fabrication of excellent oxide barrier layer which can block the pinhole and other defects left in the coating structure to improve the corrosion protection of hard coatings. In this work, CrN/Al2O3/CrN multilayered coatings were synthesized by a hybrid process of HIPIMS and ALD techniques, aiming to improve the CrN hard coating properties. The influence of the Al2O3 interlayer addition, the thickness and intercalation position of the Al2O3 layer in the coatings on the microstructure, surface roughness, mechanical properties and corrosion behaviors were investigated. The results indicated that the dense Al2O3 interlayer addition by ALD lead to a significant decrease of the average grain size and surface roughness and greatly improved the mechanical properties and corrosion resistance of the CrN coatings. The thickness increase of the Al2O3 layer and intercalation position change to near the coating surface resulted in improved mechanical properties and corrosion resistance. The mechanism can be explained by that the dense Al2O3 interlayer acted as an excellent barrier for dislocation motion and diffusion of the corrosive substance.

• Spatial Information Research
• /
• v.19 no.1
• /
• pp.107-116
• /
• 2011

Due to development of environment of wireless Internet, location based services on the basis of spatial data have been increased such as real time traffic information as well as CNS(Car Navigation System) to provide mobile user with route guidance to the destination. However, the current application adopting the file-based system has limitation of managing and storing the huge amount of spatial data. In order to supplement this challenge, research which is capable of managing large amounts of spatial data based on embedded database system is surely demanded. For this reason, this study aims to suggest the lossless compression technique by using the hybrid approach of BytePacking and Lempel-Ziv which can be applicable in DBMS so as to save a mass spatial data efficiently. We apply the proposed compression technique to actual the Seoul and Inchcon metropolitan area and compared the existing method with suggested one using the same data through analyzing the query processing duration until the reconstruction. As a result of comparison, we have come to the conclusion that suggested technique is far more performance on spatial data demanding high location accuracy than the previous techniques.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.1
• /
• pp.38-43
• /
• 2011

Cluster-based routing is high energy consumption of cluster head nodes. A recent approach to resolving the problem is the dynamic cluster technique that periodically re-selects cluster head nodes to distribute energy consumption of the sensor nodes. However, the dynamic clustering technique has a problem that repetitive construction of clustering consumes the more energies. This paper proposes a solution to the problems described above from the energy efficiency perspective. The round-robin cluster header(RRCH) technique, which fixes the initially structured cluster and sequentially selects cluster head nodes, is suggested for solving the energy consumption problem regarding repetitive cluster construction. A simulation result were compared with the performances of two of the most widely used conventional techniques, the LEACH(Low Energy Adaptive Clustering Hierarchy) and HEED(Hybrid, Energy Efficient, Distributed Clustering) algorithms, based on energy consumption, remaining energy for each node and uniform distribution. The evaluation confirmed that in terms of energy consumption, the technique proposed in this paper was 26.5% and 20% more efficient than LEACH and HEED, respectively.

• Journal of Surface Science and Engineering
• /
• v.38 no.3
• /
• pp.100-105
• /
• 2005

Cr-Si-C-N coatings were deposited on steel substrate (SKD 11) by a hybrid system of arc ion plating (AIP) and sputtering techniques. From XRD, XPS, and HRTEM analyses, it was found that Cr-Si-C-N had a fine composite microstructure comprising nano-sized crystallites of Cr(C, N) well distributed in the amorphous phase of $Si_3N_4/SiC$ mixture. Microhardness of Cr(C, N) coatings and Cr-Si-N coatings were reported about $\~22 GPa$ and $\~35 GPa$, respectively. As the Si was incorporated into Cr(C, N) coatings, The Cr-Si-C-N coatings having a Si content of $9.2 at.\%$ showed the maximum hardness value. As increased beyond Si content of $9.2 at.\%$, the interaction between nanocrystallites and amorphous phase was gone, the hardness was reduced as dependent on amorphous phase of $Si_3N_4/SiC$. In addition, the average coefficient of Cr-Si-C-N coatings largely decreased compared with Cr(C, N) coatings.