• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.11
• /
• pp.5392-5418
• /
• 2017

The primary aim of this paper is to propose a non-linear regression based technique for mapping different network Quality of Service (QoS) factors to an integrated end-user Quality of Experience (QoE) or Mean Opinion Score (MOS) value for an online video streaming service on a mobile phone. We use six network QoS factors for finding out the user QoE. The contribution of this paper is threefold. First, we investigate the impact of the network QoS factors on the perceived video quality. Next, we perform an individual mapping of the significant network QoS parameters obtained in stage 1 to the user QoE based upon a non-linear regression method. The optimal QoS to QoE mapping function is chosen based upon a decision variable. In the final stage, we evaluate the integrated QoE of the system by taking the combined effect of all the QoS factors considered. Extensive subjective tests comprising of over 50 people across a wide variety of video contents encoded with H.265/HEVC and VP9 codec have been conducted in order to gather the actual MOS data for the purpose of QoS to QoE mapping. Our proposed hybrid model has been validated against unseen data and reveals good prediction accuracy.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.185-189
• /
• 2005

We reported here nano-scale electrical phase-change recording in amorphous $Ge_2Sb_2Te_5$ media using an atomic force microscope (AFM) having conducting probes. In recording process, a pulse voltage is applied to the conductive probe that touches the media surface to change locally the electrical resistivity of a film. However, in contact operation, tip/media wear and contamination could major obstacles, which degraded SNR, reproducibility, and lifetime. In order to overcome tip/media wear and contamination in contact mode operation, we adopted the W incorporated diamond-like carbon (W-DLC) films as a protective layer. Optimized mutilayer media were prepared by a hybrid deposition system of PECVD and RF magnetron sputtering. When suitable electrical pulses were applied to media through the conducting probe, it was observed that data bits as small as 25 nm in diameter have been written and read with good reproducibility, which corresponds to a data density of $1 Tbit/inch^2$. We concluded that stable electrical phase-change recording was possible mainly due to W-DLC layer, which played a role not only capping layer but also resistive layer.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.4
• /
• pp.599-609
• /
• 2000

In this paper, sub-harmonically pumped single balanced resistive mixers are presented . Frequency bandwidth is selected for a Ku-band, which is 11.75-12.25GHz for RF, 5.375∼5.625 GHz for LO, and 1 GHz for IF signals. A rat-race hybrid is designed for the accomplishment of single balanced type. A low pass filter (LPF) with photonic band gap(PBG) structure is used for good conversion loss and unwanted harmonics suppression. Two types of mixers are suggested, which are one with no gate bias for no DC power consumption and the other with the IF amplifier for conversion gain. When a LO signal with the power of 6 dBm at 5.5 GHz is injected, a conversion loss of 12.17dB and a conversion gain of 7.83 dB are obtained for each mixer. For the both mixers , LO to RF isolation of 20 dB and LO to IF isolation of 60dB are obtained. With the RF power of -30dBm to -3dBm, the mixer shows linear characteristics region of IF. this mixer can be applied for Ku-band and other microwave communication systems.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.4
• /
• pp.105-111
• /
• 2007

Hybrid PV/Thermal systems consisting of photovoltaic module and thermal collector can produce the electricity and thermal energy. The solar radiation increases the temperature of PV modules, resulting in the decrease of their electrical efficiency. Accordingly hot air can be extracted from the space between the PV panel and roof, so the efficiency of the PV module increases. The extracted thermal energy can be used in several ways, increasing the total energy output of the system. This study describes a basic type of PV/T collector using water. In order to analyze the performance of the collector, the experiment was conducted. The result showed that the thermal efficiency was 17% average and the electrical efficiency of the PV module was about $10.2%{\sim}11.5%$, both depending on solar radiation, inlet water temperature and ambient temperature.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.838-843
• /
• 2008

Cause of struggling to escape from dependency of fossil fuels, the fuel cell and the Plug-in Hybrid Electric Vehicle (PHEV) draw attention in the all of the world. Especially, the Polymer Electrolyte Membrane Fuel Cell (PEMFC) systems have been anticipated for next generation's energy supplying system, and we can predict the PHEV will enlarge the market share in the next few years to reduce not only the air pollution in the metropolis but the fuel-expenses of commuters. This paper presents simulation results about the strategy of smart charging system for PHEV in the residential house which has 1 kW PEMFC cogeneration system. The smart charging system has a function of recommending the best time to charge the battery of PHEV by the lowest energy cost. The simulated energy cost for charging the battery based on the electricity demand data pattern in the house. The house which floor area is $132\;m^2$ (40 pyeong.). In these conditions, the annual gasoline, electricity, and total energy cost to fuel the PHEV versus Conventional Vehicle (CV) have been simulated in terms of cars' average life span in Korea.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.7
• /
• pp.39-46
• /
• 2008

High precision machining technology has become one of the important parts in the development of a precision machine. Such a machine requires high speed on a large workspace as well as high precision positioning. For machining systems having a long stroke with ultra precision, a dual-stage system including a global stage (coarse stage) and a micro stage (fine stage) is designed in this paper. Though linear motors have a long stroke and high precision feed drivers, they have some limitations for submicron positioning. Piezo-actuators with high precision also have severe disadvantage for the travel range, and the stroke is limited to a few microns. In the milling experiments, the positional accuracy has been readily achieved within 0.2 micron over the typical 20 mm stroke, and the path error over 2 micron was reduced within 0.2 micron. Therefore, this technique can be applied to develop high precision positioning and machining in the micro manufacturing and machining system.

• The Research Journal of the Costume Culture
• /
• v.22 no.2
• /
• pp.313-325
• /
• 2014

This study seeks to establish a ubiquitous wardrobe with a clothing management function through detailed and subdivided integration research. To create a database, a survey was conducted, and the output data were analyzed and used as the basic data. In particular, this study researched clothing management programs and companies' standards of clothing product classification systems. First, through an in-depth analysis centering on specialists, we established the contents of a ubiquitous wardrobe and used the concept of cloud computing to support the wardrobe contents and smart phone applications. Second, this research found significant differences between individuals, schools, and enterprises in their applications of, and the importance they attach to, design images. A detailed database composed of various categories was established to present the ubiquitous wardrobe contents with efficient functions. Third, we facilitated the search process by designating clothes with QR codes, which is one of the functions of contents. Fourth, the code numbers generated in the process of entering clothes into the database were utilized as RFID information as a way to arrange the products in a simpler manner. The ubiquitous wardrobe was constructed as a web-style hybrid, and its contents areavailable through mobile applications and QR codes.

• Proceedings of the KOSOMBE Conference
• /
• v.1993 no.05
• /
• pp.38-41
• /
• 1993

For efficient transmission and storage of digital images, the requirements of image compression is incresing. Because the medical images contain diagnostic information small distortion has been more important factor than the low rate in such images. Generally the distortion in image is the difference of pixel values. However the image is percieved by human visual systems. So it is reasonable that human visual system characteristics be used as criteria of the image compression. In this paper, the Just Noticeable Difference curve is used as criteria of determining the homogeniety of a block and acceptibility of distortions. And Block Truncation Coding using spatial masking effect of eyes is adopted to code the blocks which contain line components. And small blocks which varies slowly can be approximated to polynomial functions successfully. We proposed the hybrid block coding scheme based on the block characteristics and human visual system characteristics. Simulation to several kinds of the medical images using this method showed that medical images can be compressed 5:1 - 10:1 without noticeable distortion.

• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.97-103
• /
• 2010

In this paper, we present an efficient design scheme based on analysis of design requirements and considerations of baseband packet switch for S-band satellite/terrestrial hybrid multi-beam satellite communication systems. To establish design requirements and considerations, we analyze required functions of baseband packet switch, specifications of multi-beam satellite communications, communication services and performance requirements. And also we analyze and compare conventional layer-2 and layer-3 satellite baseband packet switching techniques, packet switching protocols and packet switch architectures, to apply from analyzed results. Finally, we propose a hardware design scheme of MPEG based layer-2 baseband packet switch using analyzed results.

• Journal of Intelligence and Information Systems
• /
• v.5 no.2
• /
• pp.29-42
• /
• 1999

현재 산업의 고도상장과 함께 주기적으로 고장을 진단하여야 하는 기기의 수와 종류도 급속도로 증가하고 있다. 이에 따라 여러 산업 분야에서 고장진단 시스템의 이용이 늘고 있는 추세이다. 이러한 고장진단 시스템은 경험적 고장진단 방식과 모델기반 고장 진단 방식으로 크게 나눌 수 있다. 경험적 고장진단 방식은 전문가가 경험한 사실의 범주에서는 신속하게 고장의 원인을 진단할 수 있지만 전문가가 경험하지 못했던 상황에 대해서는 융통성 있게 진단하지 못한다. 한편 기기의 물리적 기능적 지식을 기반으로 하는 모델기반 고장진단 방식을 변화하는 상황에 적절하게 대처하여 고장의 원인을 진단할 수 있다. 그러나 모델기반 고장진단 방식을 기기의 구조로부터 증상들을 추론하여 원인을 파악하므로 탐색 범위가 넓어 진단속도가 늦다는 단점이 있다. 본 연구에서는 이러한 경험적 고장진단 방식과 기기의 모델기반 고장진단 방식의 장점을 결합하여 신속하고 정확하게 고장진단을 할 수 있는 통합방식 고장진단 시스템을 제시한다. 통합방식 고장진단 시스템은 대상 기기의 진단 상태에 따라서 동적으로 적절한 진단 방식을 선택하기 위해서 블랙보드 추론기관을 이용한다. 또한 각 진단방식이 생성하는 가설 및 사실들을 효과적으로 통합하여 추론하기 위해서 제어지식을 정의하여 적용한다. 그리고 사용자와 진단 시스템간에 원활한 의사소통을 위해서 멀티미디어 기반 인터페이스를 채용하여 통합방식 진단 시스템을 구축한다.