• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.3
• /
• pp.319-324
• /
• 2005

This paper reports the performance of Wind-PV(Photovoltaic) hybrid system. The output power of PV is affected by the environmental factors such as solar radiation and cell temperature. Also, the output power of wind system is generated with wind power. Integration of Wind and PV resources, which are generally complementary, usually reduce the capacity of the battery. This paper includes discussion on system reliability, power quality and effects of the randomness of the wind and the solar radiation on system design.

• Journal of ILASS-Korea
• /
• v.29 no.1
• /
• pp.7-15
• /
• 2024

This study investigates the performance of 2.0L hybrid vehicles equipped with Liquefied Petroleum Gas (LPG) fuel engines, using energy flow analysis. By incorporating a direct LPG injection system (LPDi), the research aims to overcome the reduced maximum output commonly associated with LPG engines. Moreover, the integration of a hybrid system is explored as a means to enhance vehicle fuel economy while reducing CO₂ and emissions. The study employs data from FTP-75 and HWFET driving cycle to inform future research efforts focused on predicting CO₂ emissions and fuel economy for Hybrid Electric Vehicles utilizing LPG Direct Injection. The findings offer insights into optimizing fuel systems for better environmental and operational performance in hybrid vehicles.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.15 no.5
• /
• pp.11-24
• /
• 2011

A real-time hybrid test of a 3 story-3 bay reinforced concrete frame which is divided into numerical and physical substructure models under uniaxial earthquake excitation was run using a fixed iteration implicit HHT time integration method. The first story inner non-ductile column was selected as the physical substructure model, and uniaxial earthquake excitation was applied to the numerical model until the specimen failed due to severe damage. A finite-element analysis program, Mercury, was newly developed and optimized for a real-time hybrid test. The drift ratio based on the top horizontal displacement of the physical substructure model was compared with the result of a numerical simulation by OpenSees and the result of a shaking table test. The experiment in this paper is one of the most complex real-time hybrid tests, and the description of the hardware, algorithm and models is presented in detail. If there is an improvement in the numerical model, the evaluation of the tangent stiffness matrix of the physical substructure model in the finite element analysis program and better software to reduce the computational time of the element state determination for the force-based beam-column element, then the comparison with the results of the real-time hybrid test and the shaking table test deserves to make a recommendation. In addition, for the goal of a "Numerical simulation of the complex structures under dynamic loading", the real time hybrid test has enough merit as an alternative to dynamic experiments of large and complex structures.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.677-681
• /
• 2009

The Smoothly Coupled Integration (SCI) proposed in this paper takes only the strength of loosely coupled integration and tightly coupled integration. Furthermore, 3G network and WiBro network, which are coupled with SCI, have independent architecture which supports mobility and seamless services by fast handoff. Computer simulation with the use of OPNET marked excellence in performance of smoothly coupled integration.

• Smart Structures and Systems
• /
• v.14 no.6
• /
• pp.1131-1150
• /
• 2014

One of the issues in extending the range of applicable problems of real-time hybrid simulation is the computation speed of the simulator when large-scale computational models with a large number of DOF are used. In this study, functionality of real-time dynamic simulation of MDOF systems is achieved by creating a logic circuit that performs the step-by-step numerical time integration of the equations of motion of the system. The designed logic circuit can be implemented to an FPGA-based system; FPGA (Field Programmable Gate Array) allows large-scale parallel computing by implementing a number of arithmetic operators within the device. The operator splitting method is used as the numerical time integration scheme. The logic circuit consists of blocks of circuits that perform numerical arithmetic operations that appear in the integration scheme, including addition and multiplication of floating-point numbers, registers to store the intermediate data, and data busses connecting these elements to transmit various information including the floating-point numerical data among them. Case study on several types of linear and nonlinear MDOF system models shows that use of resource sharing in logic synthesis is crucial for effective application of FPGA to real-time dynamic simulation of structural response with time step interval of 1 ms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11B
• /
• pp.1207-1215
• /
• 2009

The FTTH is known as an optimal solution to provide broadband services like IPTV and the W-PON is a good alternative to implement the FTTH. It is firstly commercialized in Korea but not widely deployed because of it's high price. In this paper, we suggest a wavelength integration method to drop the price and enhance the utilization of the W-PON. The method makes one logical channel with multiple wavelengths when the W-PON system has to accommodate a signal of which transmission rate is greater than the rate of a single wavelength. Accordingly, the system can accommodate any signal rate. We introduce a frame structure, suggest synchronization and clock recovery methods, and finally show actual applications for the Ethernet and the G-PON.

• ETRI Journal
• /
• v.29 no.4
• /
• pp.452-456
• /
• 2007

Very compact 4-channel 200-GHz-spacing external cavity lasers (ECLs) were fabricated by hybrid integration of reflection gratings and superluminescent laser diodes on a planar lightwave circuit chip. The fifth-order gratings as reflection gratings were formed using a conventional contact-mask photo-lithography process to achieve low-cost fabrication. The lasing wavelength of the fabricated ECLs matched the ITU grid with an accuracy of ${\pm}0.1$ nm, and optical powers were more than 0.4 mW at the injection current of 80 mA for all channels. The ECLs showed single mode operations with more than 30 dB side lobe suppression.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.11 no.2
• /
• pp.37-50
• /
• 1986

In combining dispersed optimization models, either primal or dual(or both) decomposition method widely used as an organizing device. Interpreting the methods economically, the concepts of price and resource-directive coordination are generally well accepted. Most of deomposition/ integration methods utilize either primal information of dual information, not both, from subsystems, while some authors have developed mixed decomposition approaches employing two master problems dealing primal and dual proposals separately. In this paper a hybrid decomposition method is introduced, where one hybrid master problem utilizes the underlying relationships between primal and dual information from each subsystem. The suggested method is well justified with respect to the flexibility in information flow pattern choice (some prices and other quantities) and to the compatibility of subdivision's optimum to the systemwide optimum, that is often lacking in conventional decomposition methods such as Dantzig-Wolfe's. A numerical example is also presented to illustrate the suggested approach.

• Asia pacific journal of information systems
• /
• v.10 no.1
• /
• pp.19-35
• /
• 2000

Data Envelopment Analysis(DEA), a non-parametric productivity analysis tool, has become an accepted approach for assessing efficiency in a wide range of fields. Despite of its extensive applications, some features of DEA remain bothersome. DEA offers no guidelines to where relatively inefficient DMU(Decision Making Unit) improve since a reference set of an inefficient DMU consists of several efficient DMUs and it doesn't provide a stepwise path for improving the efficiency of each inefficient DMU considering the difference of efficiency. We aim to show that DEA can be used to evaluate the efficiency of System Integration Projects and suggest the methodology which overcomes the limitation of DEA through hybrid analysis utilizing DEA along with machine learning.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2006.05a
• /
• pp.77-88
• /
• 2006

Data Envelopment Analysis (DEA), a non-parametric productivity analysis tool, has become an accepted approach for assessing efficiency in a wide range of fields. Despite of its extensive applications, some features of DEA remain bothersome. DEA offers no guidelines to where relatively inefficient DMU(Decision Making Unit) improve since a reference set of an inefficient DMU consists of several efficient DMUs and it doesn't provide a stepwise path for improving the efficiency of each inefficient DMU considering the difference of efficiency. We aim to show that DEA can be used to evaluate the efficiency of System Integration Projects and suggest the methodology which overcomes the limitation of DEA through hybrid analysis utilizing DEA along with machine learning.